X12Cr13 | 1.4006 Material Datasheet

Material Test Series Values

Material Standard Values

Material Models for Simulation

Unlock Exclusive Materials Data

Gain access to a wealth of materials data by joining our Materials Portal.

Material Description

Material Number	Material Number (single)	Standard	Range of Application	Standard Status	Country	Predecessor	Successor	Remark
1.4006 (DIN EN 10263-5 : 2002-02)	1.4006	DIN EN 10263-5 : 2002-02	DIN EN 10263-5 : 2002-02 replaced by DIN EN 10263-5 : 2018-02	Replaced	Germany	X 10 Cr 13	X12Cr13	The steel X10Cr13 is well suited for cold-forming in the annealed condition. The strain hardening inclination is significantly lower than that of stainless austenitic steels and is about equal to that of a carbon steel. It is used for construction parts operating in water and steam, and for mild media in the food industry, predominantly in the tempered condition (screws and molded parts).

Chemical Composition

C [%]	Cr [%]	Mn [%]	Ni [%]	P [%]	S [%]	Si [%]	Source
blur	blur	blur	blur	blur	blur	blur	blur

Mechanical Properties

Semi-finished Product	Condition	Nominal Size [mm]	Temperature [°C]	Tensile Strength [MPa]	Reduction of Area [%]	Source
blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur

Physical Properties

Temperature [°C]	Density [g/cm³]	Young's Modulus [GPa]	Shear Modulus [GPa]	Poisson's Ratio	Mean Coefficient of Thermal Expansion (reference 20°C) [10^-6*K^-1]	Differential Coefficient of Thermal Expansion [10^-6*K^-1]	Thermal Conductivity [W/(m*K)]	Thermal Diffusivity [10^-6 m²/s]	Specific Electrical Resistance [µΩm]	Mean Specific Heat Capacity [kJ/(kg*K)]	True Specific Heat Capacity [kJ/(kg*K)]	Source	Remark
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur

Young's Modulus [GPa] vs Temperature [°C]

Exclusive Insight Locked!

This premium diagram is currently blurred. Gain full access to detailed insights and stay ahead with exclusive content.

Unlock Now

Mean Coefficient of Thermal Expansion (reference 20°C) [10^-6*K^-1] vs Temperature [°C]

Exclusive Insight Locked!

This premium diagram is currently blurred. Gain full access to detailed insights and stay ahead with exclusive content.

Unlock Now

Differential Coefficient of Thermal Expansion [10^-6*K^-1] vs Temperature [°C]

Exclusive Insight Locked!

This premium diagram is currently blurred. Gain full access to detailed insights and stay ahead with exclusive content.

Unlock Now

Heat Treatment

Heat Treatment	Step	Temperature [°C]	Medium	Source	Remark
blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur

Cross Reference

Material Name	Country	Standard
X12Cr13E	International	ISO 4954
SUS410	Japan	JIS G 4315
STS410	South Korea	KS D 3697
410	USA	SAE
S41000	USA	UNS

Producer/Supplier/Trade names

Tradename	Supplier
1.4006	Saarstahl AG, Völklingen
1.4006	Walzwerke Einsal GmbH, Nachrodt
1.4006	Chr. Höver & Sohn GmbH & Co KG, Lindlar
1.4006	SCHMOLZ + BICKENBACH GUSS GmbH, Krefeld
1.4006	ZAPP AG, Ratingen
1.4006	Rolf Kind GmbH, Gummersbach
1.4006	BESSEY Tool GmbH & Co. KG, Bietigheim-Bissingen
1.4006	NIRONIT Edelstahlhandel GmbH, Rosengarten
1.4006	H. Kleineberg GmbH, Stelle
1.4006	ROPA STAHLVERTRIEB GMBH, Bad Bergzabern
1.4006	INOX SERVICE CENTER GmbH, Krefeld
1.4006	STAPPERT Deutschland GmbH, Düsseldorf
1.4006	INTERSTAHL Service GmbH, Wetter
1.4006	Rosswag GmbH, Pfinztal-Kleinsteinbach
1.4006	Imet Industriemetall Handelsgesellschaft mbH, Hamburg
1.4006	Eisen-Heinzl GmbH, Selb-Erkersreuth
1.4006	Quick Metall GmbH, Forst
135 W	Willy Haecker GmbH, Hückeswagen
4006	Swiss Steel International GmbH, Düsseldorf
4006	Edelstahlservice GmbH, Frankfurt/M.
4006	K. D. Feddersen & Co. Ueberseegesellschaft mbH, Hamburg
AL 410	ATI Flat Rolled Products GmbH, Remscheid
ARGESTE 1.4006	Stahlwerk Ergste Westig GmbH, Schwerte
AVESTA-Polarit Hy Flow 420R	Outokumpu GmbH, Willich
BGH 4006	BGH Edelstahl Siegen GmbH
BÖHLER N 100	voestalpine High Perfomance Metals Deutschland GmbH, Düsseldorf
BÖHLER N100	voestalpine BÖHLER Edelstahl GmbH & Co.KG, Kapfenberg
Cogne 410	COGNE Edelstahl GmbH, Neuss
Coracid 4006	Chr. Höver & Sohn GmbH & Co. KG, Lindlar
Corronon 1	Aubert&Duval Special Steel GmbH, Mönchengladbach
CY 410	AUBERT & DUVAL Deutschland GmbH, München
DIRO-X 10 Cr 13	DIROSTAHL, Remscheid
DIRO-X12Cr13	DIROSTAHL, Remscheid
DMV 410	Salzgitter Mannesmann Stainless Tubes GmbH, Mülheim an der Ruhr
DOMINIAL R 13 FM	Kind & Co., Edelstahlwerk, Wiehl
Edel 1.4006	ET Edelstahl-Trading GmbH, Willich
FS 4006-410	TPS-Technitube Röhrenwerke GmbH, Daun
Inox 1.4006	INOX-Stahlgesellschaft mbH, Nürtingen
Klöckner 1.4006	Klöckner & Co SE, Duisburg
Koro 4006	Koring + Rottsieper Edelstahl GmbH + Co.KG, Remscheid
Märker Irrubigo 4006	Schmidt + Clemens GmbH + Co. KG, Edelstahlwerk Kaiserau, Lindlar
N100	Schoeller-Bleckmann Edelstahlrohr GmbH, Ternitz
NIROSTA 4006	Deutsche Edelstahlwerke Specialty Steel GmbH & Co. KG, Witten
NIROSTA 4006	Outokumpu Nirosta GmbH, Krefeld
Plate X 10 Cr 13	Platestahl Umformtechnik GmbH, Lüdenscheid
Puro 1.4006	Remystahl GmbH & Co. KG, Hagen
R 15 W	Dörrenberg Edelstahl GmbH, Engelskirchen
REMANIT 4006	Deutsche Edelstahlwerke Specialty Steel GmbH & Co. KG, Witten
RF 10	Gustav Grimm Edelstahlwerk GmbH & Co. KG, Remscheid
SANDVIK 2XC24	SANDVIK Materials TEchnology Deutschland GmbH, Düsseldorf
Soleil A 2	Industeel Deutschland GmbH, Grevenbroich
THENOX 4006	C.D. Wälzholz GmbH & Co. KG, Hagen
UGIMA 4006	Ugitech SA, Ugine
UGINE 4006	Ugitech SA, Ugine
UGINE 4006A	Ugitech SA, Ugine
UGINE 4006H	Ugitech SA, Ugine
UGINE A4006	Ugitech SA, Ugine
UGINE A410	Ugitech SA, Ugine
UGINE C4006	Ugitech SA, Ugine
UGINE F4006	Ugitech SA, Ugine
UGINE HQ4006-1	Ugitech SA, Ugine
UGINE HQ4006-2	Ugitech SA, Ugine
UGINE HQ4006-3	Ugitech SA, Ugine
UGINOX MA 1	Aperam Stainless Europe, Paris
X 10 Cr 13	Hoesch Hohenlimburg GmbH, Hagen
X 10 Cr 13	Böllinghaus Steel GmbH, Hilden
X 10 Cr 13	HEINE + BEISSWENGER Stiftung + Co.KG, Fellbach
X 13 M	AUBERT & DUVAL Deutschland GmbH, München
X12Cr13	voestalpine AG, Linz
X12Cr13	Stahlrump GmbH & Co.KG, Iserlohn
X12Cr13	Schmiedewerke Gröditz GmbH, Gröditz
X12Cr13	Vallourec Deutschland GmbH, Düsseldorf
X12Cr13	Tata Steel, IJmuiden
X12Cr13	EZM Edelstahlzieherei Mark GmbH, Wetter
X12Cr13	Hammerwerk Erft, G. Diederichs GmbH & Co. KG, Bad Münstereifel-Arloff
X12Cr13	Wilhelm Jungermann GmbH, Remscheid
X12Cr13	Wilhelm Oberste-Beulmann GmbH & Co. KG, Remscheid
X12Cr13	pauly STAHLHANDEL, Essen

Material Compliance

REACh	RoHS
blur	blur

X12Cr13 (1.4006; DIN EN 10263-5 : 2002-02)

Linear-elastic

Temperature [°C]	Young's modulus [GPa]	Shear modulus [GPa]	Poisson's ratio
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur

Alternating stress

Temperature [°C]	Stress ratio	Alternating stress [MPa]	Cycles
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur

Electrical resistivity

Temperature [°C]	Specific electrical resistance [µΩm]
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur

Coefficient thermal expansion

Related Temperature [°C]	Temperature [°C]	Coefficient thermal expansion [10^-6*K^-1]
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur

Specific heat

Temperature [°C]	Specific heat [kJ/(kg*K)]
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur

Density

Temperature [°C]	Density [g/cm³]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Thermal conductivity

Temperature [°C]	Thermal conductivity [W/(m*K)]
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur

Classification

WIAM Material	Source description
blur	blur

Designation

Designation	Material number	Source
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur

X12Cr13 (soft annealed or soft annealed and roll shafted (+A or +A+PE); wire; 5.000-100.000mm)

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

X12Cr13 (soft annealed and skin passed (+A+LC); wire; 5.000-10.000mm)

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

X12Cr13 (soft annealed and skin passed (+A+LC); wire; 10.000-25.000mm)

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

X12Cr13 (soft annealed, cold drawn and annealed (+A+C+A); wire; 2.000-25.000mm)

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

X12Cr13 (soft annealed, cold drawn, soft annealed and skin passed (+A+C+A+LC); wire; 2.000-5.000mm)

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

X12Cr13 (soft annealed, cold drawn, soft annealed and skin passed (+A+C+A+LC); wire; 5.000-10.000mm)

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

X12Cr13 | 1.4006 Material Datasheet

Material Test Series Values

Material Standard Values

Material Models for Simulation

Material Description

Chemical Composition

Mechanical Properties

Physical Properties

Young's Modulus [GPa] vs Temperature [°C]

Mean Coefficient of Thermal Expansion (reference 20°C) [10^-6*K^-1] vs Temperature [°C]

Differential Coefficient of Thermal Expansion [10^-6*K^-1] vs Temperature [°C]

Heat Treatment

Cross Reference

Producer/Supplier/Trade names

Material Compliance

X12Cr13 (1.4006; DIN EN 10263-5 : 2002-02)

Linear-elastic

Alternating stress

Electrical resistivity

Coefficient thermal expansion

Specific heat

Density

Tensile strength

Thermal conductivity

Classification

Designation

X12Cr13 (soft annealed or soft annealed and roll shafted (+A or +A+PE); wire; 5.000-100.000mm)

Tensile strength

Classification

X12Cr13 (soft annealed and skin passed (+A+LC); wire; 5.000-10.000mm)

Tensile strength

Classification

X12Cr13 (soft annealed and skin passed (+A+LC); wire; 10.000-25.000mm)

Tensile strength

Classification

X12Cr13 (soft annealed, cold drawn and annealed (+A+C+A); wire; 2.000-25.000mm)

Tensile strength

Classification

X12Cr13 (soft annealed, cold drawn, soft annealed and skin passed (+A+C+A+LC); wire; 2.000-5.000mm)

Tensile strength

Classification

X12Cr13 (soft annealed, cold drawn, soft annealed and skin passed (+A+C+A+LC); wire; 5.000-10.000mm)

Tensile strength

Classification

Similar Materials