AlRMg1 | 3.3319 Material Datasheet

Material Standard Values

Material Models for Simulation

Unlock Exclusive Materials Data

Gain access to a wealth of materials data by joining our Materials Portal.

Material Description

Material Number	Material Number (single)	Standard	Range of Application	Standard Status	Country	Remark
3.3319 (DIN 1725-1 : 1983-02)	3.3319	DIN 1725-1 : 1983-02	DIN 1725-1 : 1983-02 replaced by DIN EN 573-3 : 2003-10 and DIN EN 573-4 : 2004-05	Replaced	Germany	The alloy AlRMg1 belongs to the standardised glossing materials. It can be polished after preceding mechanical polishing chemically or electrolytically to high gloss. For using the high gloss surface a afterwards anodising is necessary. The degree of arranged reflection (gloss degree) dependents from the degree of purity of the alloy and the thickness of the produced anodising layer. The alloy AlRMg1 is nature hard, i.e. with their a strength increase can be achieved only by cold forming. The material is well cold and warm fomrable, has a very good corrosion resistance and is also well anodically to be oxidized. Application: For metal goods, like building fittings, table-ware, flow pressed parts, autotrim and divides and for decoration and jeweller goods.

Chemical Composition

Fe [%]	Mg [%]	Si [%]	Ti [%]	Zn [%]	Source	Remark
blur	blur	blur	blur	blur	blur	blur

Mechanical Properties

Semi-finished Product	Condition	Designation of the delivered Condition DIN	Delivery Condition EN	Strength Abbrevation	Nominal Size [mm]	Temperature [°C]	Tensile Strength [MPa]	Yield Strength (0.2% offset) [MPa]	Elongation A10 [%]	Elongation A [%]	Hardness HB \| HBW	Source
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur

Physical Properties

Temperature [°C]	Melting Temperature [°C]	Density [g/cm³]	Young's Modulus [GPa]	Shear Modulus [GPa]	Electric Conductivity [MS/m]	Source
blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur

Young's Modulus [GPa] vs Temperature [°C]

Exclusive Insight Locked!

This premium diagram is currently blurred. Gain full access to detailed insights and stay ahead with exclusive content.

Unlock Now

Cross Reference

Material Name	Country	Standard
AlRMg1	USA	AA 5605
EN AW-Al 99,98Mg1 (EN AW-5605)	Germany	DIN EN 573-3

Producer/Supplier/Trade names

Tradename	Supplier
651	Aluminium-Werke Wutöschingen AG & Co. KG, Wutöschingen
AlRMg1	Wieland Prometa GmbH, Düsseldorf
R 1	OTTO FUCHS KG, Meinerzhagen

Material Compliance

REACh	RoHS
blur	blur

Formability - Bending - Folding

Condition Number	Strength Abbrevation	Nominal Size [mm]	Rolling Direction	Ductility	Bend Factor	Source
blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur

AlRMg1 (3.3319; DIN 1725-1 : 1983-02)

Linear-elastic

Temperature [°C]	Young's modulus [GPa]	Shear modulus [GPa]	Poisson's ratio
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur

Alternating stress

Temperature [°C]	Stress ratio	Alternating stress [MPa]	Cycles
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur

Yield strength

Temperature [°C]	0.2% Proof strength [MPa]
blur	blur

Density

Temperature [°C]	Density [g/cm³]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Source description
blur	blur

Designation

Designation	Material number	Source
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur

AlRMg1 (soft annealed (+A); strip; 0.350-3.000mm)

Yield strength

Temperature [°C]	0.2% Proof strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

AlRMg1 (soft annealed (+A); sheet; 0.350-6.000mm)

Yield strength

Temperature [°C]	0.2% Proof strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

AlRMg1 (1/4 hard, stress-relieved; strip; 0.350-3.000mm)

Yield strength

Temperature [°C]	0.2% Proof strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

AlRMg1 (1/2 hard, stress-relieved; strip; 0.350-2.500mm)

Yield strength

Temperature [°C]	0.2% Proof strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

AlRMg1 (hard, stress-relieved; strip; 0.350-2.000mm)

Yield strength

Temperature [°C]	0.2% Proof strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

AlRMg1 (spring hard; strip; 0.350-2.000mm)

Yield strength

Temperature [°C]	0.2% Proof strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

AlRMg1 | 3.3319 Material Datasheet

Material Standard Values

Material Models for Simulation

Material Description

Chemical Composition

Mechanical Properties

Physical Properties

Young's Modulus [GPa] vs Temperature [°C]

Cross Reference

Producer/Supplier/Trade names

Material Compliance

Formability - Bending - Folding

AlRMg1 (3.3319; DIN 1725-1 : 1983-02)

Linear-elastic

Alternating stress

Yield strength

Density

Tensile strength

Classification

Designation

AlRMg1 (soft annealed (+A); strip; 0.350-3.000mm)

Yield strength

Tensile strength

Classification

AlRMg1 (soft annealed (+A); sheet; 0.350-6.000mm)

Yield strength

Tensile strength

Classification

AlRMg1 (1/4 hard, stress-relieved; strip; 0.350-3.000mm)

Yield strength

Tensile strength

Classification

AlRMg1 (1/2 hard, stress-relieved; strip; 0.350-2.500mm)

Yield strength

Tensile strength

Classification

AlRMg1 (hard, stress-relieved; strip; 0.350-2.000mm)

Yield strength

Tensile strength

Classification

AlRMg1 (spring hard; strip; 0.350-2.000mm)

Yield strength

Tensile strength

Classification

Similar Materials