AlCuMg2 | 3.1355 Material Datasheet

Material Test Series Values

Material Standard Values

Material Models for Simulation

Unlock Exclusive Materials Data

Gain access to a wealth of materials data by joining our Materials Portal.

Material Description

Material Number	Material Number (single)	Standard	Range of Application	Standard Status	Country	Successor	Remark
3.1355 (DIN 1725-1 : 1983-02)	3.1355	DIN 1725-1 : 1983-02	DIN 1725-1 : 1983-02 replaced by DIN EN 573-3 : 2003-10 and DIN EN 573-4 : 2004-05	Replaced	Germany	EN AW-Al Cu4Mg1	The alloy AlCuMg2 (see also AlCuMg2, material NR. 3.1355 according to DIN 1725, part of 1, expenditure. 02.83) belongs to the type of alloy (AlCuMg type), which found of the aluminum wrought machine materials as first in the technology use. Alloys of this type are cold and heat hardenable. They reach thereby high mechanical strength and are relatively heat resistant even in the soft condition. In the cold-hardened condition this alloy exhibits strength grades to maximally F 48 and lies most highly compared with the other standardisd AlCuMg materials. Warm ageing is not in practice usual for reasons of the corrosion resistance worsening in this state. Even in the cold-hardened condition a surface protection is necessary. It is disadvantageous, that even the smallest mistake in heat treatment results in decreasing of strength as well as the bad ability for hot forming and difficult weldability of this alloy. Its particularly good splinter-giving workability is remarkable, whereby screws and rivets are suitable for joining elements. Due to the high strength the alloy AlCuMg1 is particularly well suitable for construction units, which are exposed to higher static loading. Heat treatment for hardening: solution annealing: 495 to 505 °C, quenching in water cold ageing: 5 to 8 d at ambient temperatures hot ageing: 16 to 24 h at 180 to 195 °C Application: In mechanical engineering (including building of forms) for tools, machine tables, turned parts (hydraulic/pneumatics), for devices (baseplates, head and stamp retaining plates as well as guide plates) as joining elements (screws, solid rivets). In the automobile engineering as body and/or safety-related parts, bumpers, in the transportation for air freight containers and particularly in the aircraft construction. The material 3,1354 belongs to the most important aviation materials!

Chemical Composition

Cr [%]	Cu [%]	Fe [%]	Mg [%]	Mn [%]	Si [%]	Ti [%]	Zn [%]	Source	Remark
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur

Mechanical Properties

Semi-finished Product	Condition	Designation of the delivered Condition DIN	Delivery Condition EN	Strength Abbrevation	Nominal Size [mm]	Temperature [°C]	Tensile Strength [MPa]	Yield Strength (0.2% offset) [MPa]	Elongation A10 [%]	Elongation A100 [%]	Elongation A [%]	Hardness HB \| HBW	Source	Remark
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur

Physical Properties

Temperature [°C]	Melting Temperature [°C]	Density [g/cm³]	Young's Modulus [GPa]	Shear Modulus [GPa]	Thermal Conductivity [W/(m*K)]	Mean Specific Heat Capacity [kJ/(kg*K)]	Electric Conductivity [MS/m]	Source
blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur

Young's Modulus [GPa] vs Temperature [°C]

Exclusive Insight Locked!

This premium diagram is currently blurred. Gain full access to detailed insights and stay ahead with exclusive content.

Unlock Now

Cross Reference

Material Name	Country	Standard
2024	Australia	AS 2848.1
2024	Belgium	NBN P 21-001
2024	France	NF A 50-411
A-U4G1	France	NF A 50-411
2024	France	NF A 50-451
A-U4G1	France	NF A 50-451
2024	France	NF A 50-901
A-U4G1	France	NF A 50-901
2024	Great Britain	BS 1470
2L97	Great Britain	BSL 2L97
1160	Russia	GOST 4784
D16	Russia	GOST 4784
AlCuMg2	USA	AA 2024
AlCu4Mg1	International	ISO 209-1
2024	Italy	UNI 9002/4
3583	Italy	UNI 9002/4
9002/4	Italy	UNI 9002/4
P-AlCu4,4MgMn	Italy	UNI 9002/4
A2024P	Japan	JIS H 4000
A2024PC	Japan	JIS H 4000
A2024BD	Japan	JIS H 4040
A2024BE	Japan	JIS H 4040
A2024W	Japan	JIS H 4040
A2024TD	Japan	JIS H 4080
A2024TE	Japan	JIS H 4080
A2024S	Japan	JIS H 4100
AlCuMg2	Austria	ÖNORM M 3430
AlCu4Mg2	Poland	PN H-88026
PA7	Poland	PN H-88026
AlCu4Mg1Mn	Romania	STAS 7608
AlCu4Mg1,5	Switzerland	SN 210900
2024	Spain	UNE 38-300
Al-4Cu1Mg	Spain	UNE 38-300
L-3140	Spain	UNE 38-300
2024	Spain	UNE 38-314
Al-4Cu1Mg	Spain	UNE 38-314
L-3140	Spain	UNE 38-314
20241	South Africa	SABS 712
Al-Cu4Mg1	South Africa	SABS 712
AlCuMg2	Turkey	TS 412
AlCu4Mg2	Hungary	MSZ 3714/1
EN AW-Al Cu4Mg1 (EN AW-2024)	Germany	DIN EN 573-3

Producer/Supplier/Trade names

Tradename	Supplier
2240	Novelis AG, Koblenz
502	Diehl Metall Stiftung & Co. KG, Röthenbach
AK 24	OTTO FUCHS KG, Meinerzhagen
Al-Cu-Mg 2	Metall Dittrich, Velbert
Alcan WG-24 S	Novelis Deutschland GmbH, Göttingen
AlCuMg2	Drahtwerk Elisental W. Erdmann GmbH & Co, Neuenrade
AlCuMg2	CSN Carl Schreiber GmbH, Neunkirchen
AlCuMg2	Wieland Prometa GmbH, Düsseldorf
AlCuMg2	Manfred J.C. Niemann, Bremen
VAW 17/24	Hydro Aluminium Rolled Products GmbH, Grevenbroich
VAW 17/24	Hydro Aluminium Deutschland GmbH, Hannover
VAW 17/24	Aluminium Norf GmbH, Neuss
VAW 17/24	Hydro Aluminium Deutschland GmbH , Bonn

Material Compliance

REACh	RoHS
blur	blur

Formability - Bending - Folding

Condition Number	Strength Abbrevation	Nominal Size [mm]	Rolling Direction	Ductility	Bend Factor	Source
blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur

AlCuMg2 (3.1355; DIN 1725-1 : 1983-02)

Strain life

Temperature [°C]	Cyclic fatigue strength coefficient [MPa]	Cyclic fatigue strength exponent	Ductility coefficient [Pa]	Ductility exponent	Cyclic strength coefficient [MPa]	Cyclic strain hardening exponent	Young's modulus [GPa]
blur	blur	blur	blur	blur	blur	blur	blur

Linear-elastic

Temperature [°C]	Young's modulus [GPa]	Shear modulus [GPa]	Poisson's ratio
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur

Alternating stress

Temperature [°C]	Stress ratio	Alternating stress [MPa]	Cycles
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur

Yield strength

Temperature [°C]	0.2% Proof strength [MPa]
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur

Specific heat

Temperature [°C]	Specific heat [kJ/(kg*K)]
blur	blur

Density

Temperature [°C]	Density [g/cm³]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur

Thermal conductivity

Temperature [°C]	Thermal conductivity [W/(m*K)]
blur	blur

Classification

WIAM Material	Source description
blur	blur

Designation

Designation	Material number	Source
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur

AlCuMg2 (tension/compression; flaw)

Alternating stress

Temperature [°C]	Stress ratio	Alternating stress [MPa]	Cycles
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur

Classification

Load type	Failure criteria	Source description
blur	blur	blur

AlCuMg2 (tension/compression; fracture)

Alternating stress

Temperature [°C]	Stress ratio	Alternating stress [MPa]	Cycles
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur

Classification

Load type	Failure criteria	Source description
blur	blur	blur

AlCuMg2 (T3 (solution heat-treated, cold worked and naturally aged); sheet; 6mm; flaw)

Strain life

Temperature [°C]	Cyclic fatigue strength coefficient [MPa]	Cyclic fatigue strength exponent	Ductility coefficient [Pa]	Ductility exponent	Cyclic strength coefficient [MPa]	Cyclic strain hardening exponent	Young's modulus [GPa]
blur	blur	blur	blur	blur	blur	blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Failure criteria	Source description
blur	blur	blur	blur	blur

AlCuMg2 (T4 (solution heat-treated and naturally aged); 6.35mm; load drop)

Strain life

Temperature [°C]	Cyclic fatigue strength coefficient [MPa]	Cyclic fatigue strength exponent	Ductility coefficient [Pa]	Ductility exponent	Cyclic strength coefficient [MPa]	Cyclic strain hardening exponent	Young's modulus [GPa]
blur	blur	blur	blur	blur	blur	blur	blur

Classification

Treatment	Dimension [mm]	Failure criteria	Source description
blur	blur	blur	blur

AlCuMg2 (T3 (solution heat-treated, cold worked and naturally aged); 5mm; flaw)

Strain life

Temperature [°C]	Cyclic fatigue strength coefficient [MPa]	Cyclic fatigue strength exponent	Ductility coefficient [Pa]	Ductility exponent	Cyclic strength coefficient [MPa]	Cyclic strain hardening exponent	Young's modulus [GPa]
blur	blur	blur	blur	blur	blur	blur	blur

Classification

Treatment	Dimension [mm]	Failure criteria	Source description
blur	blur	blur	blur

AlCuMg2 (T3 (solution heat-treated, cold worked and naturally aged); bar; 6.35mm; not specified)

Strain life

Temperature [°C]	Cyclic fatigue strength coefficient [MPa]	Cyclic fatigue strength exponent	Ductility coefficient [Pa]	Ductility exponent	Cyclic strength coefficient [MPa]	Cyclic strain hardening exponent	Young's modulus [GPa]
blur	blur	blur	blur	blur	blur	blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Failure criteria	Source description
blur	blur	blur	blur	blur

AlCuMg2 (cold work hardened (+C); sheet; 5-30mm; flaw)

Strain life

Temperature [°C]	Cyclic fatigue strength coefficient [MPa]	Cyclic fatigue strength exponent	Ductility coefficient [Pa]	Ductility exponent	Cyclic strength coefficient [MPa]	Cyclic strain hardening exponent	Young's modulus [GPa]
blur	blur	blur	blur	blur	blur	blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Failure criteria	Source description
blur	blur	blur	blur	blur

AlCuMg2 (T3 (solution heat-treated, cold worked and naturally aged); sheet; 4mm; load drop)

Strain life

Temperature [°C]	Cyclic fatigue strength coefficient [MPa]	Cyclic fatigue strength exponent	Ductility coefficient [Pa]	Ductility exponent	Cyclic strength coefficient [MPa]	Cyclic strain hardening exponent	Young's modulus [GPa]
blur	blur	blur	blur	blur	blur	blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Failure criteria	Source description
blur	blur	blur	blur	blur

AlCuMg2 (soft annealed (+A); bar; 16mm; flaw)

Strain life

Temperature [°C]	Cyclic fatigue strength coefficient [MPa]	Cyclic fatigue strength exponent	Ductility coefficient [Pa]	Ductility exponent	Cyclic strength coefficient [MPa]	Cyclic strain hardening exponent	Young's modulus [GPa]
blur	blur	blur	blur	blur	blur	blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Failure criteria	Source description
blur	blur	blur	blur	blur

AlCuMg2 (naturally aged; bar; 16mm; flaw)

Strain life

Temperature [°C]	Cyclic fatigue strength coefficient [MPa]	Cyclic fatigue strength exponent	Ductility coefficient [Pa]	Ductility exponent	Cyclic strength coefficient [MPa]	Cyclic strain hardening exponent	Young's modulus [GPa]
blur	blur	blur	blur	blur	blur	blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Failure criteria	Source description
blur	blur	blur	blur	blur

AlCuMg2 (sheet; 5-30mm; flaw)

Strain life

Temperature [°C]	Cyclic fatigue strength coefficient [MPa]	Cyclic fatigue strength exponent	Ductility coefficient [Pa]	Ductility exponent	Cyclic strength coefficient [MPa]	Cyclic strain hardening exponent	Young's modulus [GPa]
blur	blur	blur	blur	blur	blur	blur	blur

Classification

Semi-finished product	Dimension [mm]	Failure criteria	Source description
blur	blur	blur	blur

AlCuMg2 (soft annealed (+A); strip; 0.350-3.000mm)

Yield strength

Temperature [°C]	0.2% Proof strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

AlCuMg2 (soft annealed (+A); sheet; 0.350-12.000mm)

Yield strength

Temperature [°C]	0.2% Proof strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

AlCuMg2 (1/2 hard; wire; 0.000-10.000mm)

Yield strength

Temperature [°C]	0.2% Proof strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

AlCuMg2 (T4 (solution heat-treated and naturally aged); wire; 0.000-10.000mm)

Yield strength

Temperature [°C]	0.2% Proof strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

AlCuMg2 (T4 (solution heat-treated and naturally aged); drop forging; 0.000-100.000mm)

Yield strength

Temperature [°C]	0.2% Proof strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

AlCuMg2 (T4 (solution heat-treated and naturally aged); hammer forging; 0.000-100.000mm)

Yield strength

Temperature [°C]	0.2% Proof strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

AlCuMg2 (T3 (solution heat-treated, cold worked and naturally aged); strip; 0.350-3.000mm)

Yield strength

Temperature [°C]	0.2% Proof strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

AlCuMg2 (T3 (solution heat-treated, cold worked and naturally aged); sheet; 0.350-12.000mm)

Yield strength

Temperature [°C]	0.2% Proof strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

AlCuMg2 (T3 (solution heat-treated, cold worked and naturally aged); tube; 1.000-6.000mm)

Yield strength

Temperature [°C]	0.2% Proof strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

AlCuMg2 (T3 (solution heat-treated, cold worked and naturally aged); section; 2.000-30.000mm)

Yield strength

Temperature [°C]	0.2% Proof strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

AlCuMg2 (T3 (solution heat-treated, cold worked and naturally aged); tube; 6.000-20.000mm)

Yield strength

Temperature [°C]	0.2% Proof strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

AlCuMg2 (T3 (solution heat-treated, cold worked and naturally aged); rod; 60.000-150.000mm)

Yield strength

Temperature [°C]	0.2% Proof strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

AlCuMg2 (T3 (solution heat-treated, cold worked and naturally aged); rod; 100.000-200.000mm)

Yield strength

Temperature [°C]	0.2% Proof strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

AlCuMg2 (T3 (solution heat-treated, cold worked and naturally aged); tube; 0.000-1.000mm)

Yield strength

Temperature [°C]	0.2% Proof strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

AlCuMg2 (T3 (solution heat-treated, cold worked and naturally aged); rod; 0.000-30.000mm)

Yield strength

Temperature [°C]	0.2% Proof strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

AlCuMg2 (T3 (solution heat-treated, cold worked and naturally aged); rod; 0.000-50.000mm)

Yield strength

Temperature [°C]	0.2% Proof strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

AlCuMg2 (T3 (solution heat-treated, cold worked and naturally aged); rod; 0.000-60.000mm)

Yield strength

Temperature [°C]	0.2% Proof strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

AlCuMg2 (T3 (solution heat-treated, cold worked and naturally aged); rod; 0.000-100.000mm)

Yield strength

Temperature [°C]	0.2% Proof strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

AlCuMg2 (solution annealed and strain hardened; wire; 0.000-8.000mm)

Yield strength

Temperature [°C]	0.2% Proof strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

AlCuMg2 (F44)

Yield strength

Temperature [°C]	0.2% Proof strength [MPa]
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur

Classification

Treatment	Source description
blur	blur