AlMg2,7Mn | 3.3537 Material Datasheet

Material Test Series Values

Material Standard Values

Material Models for Simulation

Unlock Exclusive Materials Data

Gain access to a wealth of materials data by joining our Materials Portal.

Material Description

Material Number	Material Number (single)	Standard	Range of Application	Standard Status	Country	Successor	Remark
3.3537 (DIN 1725-1 : 1983-02)	3.3537	DIN 1725-1 : 1983-02	DIN 1725-1 : 1983-02 replaced by DIN EN 573-3 : 2003-10 and DIN EN 573-4 : 2004-05	Replaced	Germany	EN AW-Al Mg3Mn	With AlMg2,7Mn a press effect arises with products of extruding, which causes noticeable strength increases in press direction. This feature is likewise a consequence of the Mn-addition like the increase of the heat resistance. AlMg2,7Mn can be used due to the relatively good physical properties also for statically loaded constructions. The alloy is characterised by a good corrosion resistance. It is sea water steady and steady against saline atmosphere. With the Mg content the strength increases, while the cold forming capacity decreases. The material is nature hard, i.e. that only by a cold forming, however not by a purposeful heat treatment a strength increase can be attained. The splinter-giving workability and the weldability are improved with increasing Mg content. The alloy Al2,7Mn is standardised as semi-finished material only as sheet metal or strip, thickness > 0,35 mm (DIN 1745) Application: In the apparatus engineering for receivers according to VdTUEV-Werkstoffblaetter (cold carburetor, liquid air separation), for tanks for very low-temperatures and for temperatures to 250 °C. In the automobile engineering for silo and tank trucks, dump truck hollows, buses, cool and air conditioning systems, in the building industry for carrying constructions and for thermal insulation as well as in food industry for commercial devices.

Chemical Composition

Cr [%]	Cu [%]	Fe [%]	Mg [%]	Mn [%]	Si [%]	Ti [%]	Zn [%]	Source	Remark
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur

Mechanical Properties

Semi-finished Product	Condition	Designation of the delivered Condition DIN	Delivery Condition EN	Strength Abbrevation	Nominal Size [mm]	Temperature [°C]	Tensile Strength [MPa]	Yield Strength (0.2% offset) [MPa]	Elongation A [%]	Hardness HB \| HBW	Source	Remark
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur

Physical Properties

Temperature [°C]	Melting Temperature [°C]	Density [g/cm³]	Young's Modulus [GPa]	Shear Modulus [GPa]	Mean Coefficient of Thermal Expansion (reference 20°C) [10^-6*K^-1]	Thermal Conductivity [W/(m*K)]	Mean Specific Heat Capacity [kJ/(kg*K)]	Electric Conductivity [MS/m]	Source	Remark
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur

Young's Modulus [GPa] vs Temperature [°C]

Exclusive Insight Locked!

This premium diagram is currently blurred. Gain full access to detailed insights and stay ahead with exclusive content.

Unlock Now

Mean Coefficient of Thermal Expansion (reference 20°C) [10^-6*K^-1] vs Temperature [°C]

Exclusive Insight Locked!

This premium diagram is currently blurred. Gain full access to detailed insights and stay ahead with exclusive content.

Unlock Now

Cross Reference

Material Name	Country	Standard
5454	Australia	AS 2848.1
5454	Belgium	NBN P21-001
5454	France	NF A 50-411
A-G2,5MC	France	NF A 50-411
5454	France	NF A 50-451
A-G2,5MC	France	NF A 50-451
5454	Great Britain	BS 4300/10
N51	Great Britain	BS 4300/10
5454	Great Britain	BS 4300/11
N51	Great Britain	BS 4300/11
5454	Great Britain	BS 4300/12
N51	Great Britain	BS 4300/12
5454	Great Britain	BS 4300/8
N51	Great Britain	BS 4300/8
AlMg2,7Mn	USA	AA 5454
AlMg3Mn	International	ISO 209-1
A5454P	Japan	JIS H 4000
A5454TE	Japan	JIS H 4080
A5454S	Japan	JIS H 4100
AlMg2,7Mn	Switzerland	SN 210900
5454	Spain	UNE 38-300
Al-3MgMn	Spain	UNE 38-300
L-3391	Spain	UNE 38-300
5454	Spain	UNE 38-345
Al-3MgMn	Spain	UNE 38-345
L-3391	Spain	UNE 38-345
AlMg2,7Mn	Turkey	TS 412
EN AW-Al Mg3Mn (EN AW-5454)	Germany	DIN EN 573-3

Producer/Supplier/Trade names

Tradename	Supplier
5400	Novelis AG, Koblenz
Alcan WG-B 53 S	Novelis Deutschland GmbH, Göttingen
AlMg2,7Mn	Wieland Prometa GmbH, Düsseldorf
AlMg2,7Mn	Eduard Hueck, Lüdenscheid
AM 31	OTTO FUCHS KG, Meinerzhagen

Material Compliance

REACh	RoHS
blur	blur

Formability - Bending - Folding

Condition Number	Strength Abbrevation	Nominal Size [mm]	Rolling Direction	Ductility	Bend Factor	Source	Remark
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur

AlMg2,7Mn (3.3537; DIN 1725-1 : 1983-02)

Linear-elastic

Temperature [°C]	Young's modulus [GPa]	Shear modulus [GPa]	Poisson's ratio
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur

Alternating stress

Temperature [°C]	Stress ratio	Alternating stress [MPa]	Cycles
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur

Yield strength

Temperature [°C]	0.2% Proof strength [MPa]
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur

Coefficient thermal expansion

Related Temperature [°C]	Temperature [°C]	Coefficient thermal expansion [10^-6*K^-1]
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur

Specific heat

Temperature [°C]	Specific heat [kJ/(kg*K)]
blur	blur

Density

Temperature [°C]	Density [g/cm³]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur

Thermal conductivity

Temperature [°C]	Thermal conductivity [W/(m*K)]
blur	blur

Classification

WIAM Material	Source description
blur	blur

Designation

Designation	Material number	Source
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur

AlMg2,7Mn (hot rolled; sheet; 4.000-25.000mm)

Yield strength

Temperature [°C]	0.2% Proof strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

AlMg2,7Mn (hot rolled; sheet; 25.000-50.000mm)

Yield strength

Temperature [°C]	0.2% Proof strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

AlMg2,7Mn (1/4 hard, stress-relieved; sheet; 4.000-6.000mm)

Yield strength

Temperature [°C]	0.2% Proof strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

AlMg2,7Mn (1/4 hard, stress-relieved; sheet; 6.000-12.000mm)

Yield strength

Temperature [°C]	0.2% Proof strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

AlMg2,7Mn (1/2 hard, stress-relieved; sheet; 4.000-6.000mm)

Yield strength

Temperature [°C]	0.2% Proof strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

AlMg2,7Mn (1/2 hard, stress-relieved; sheet; 6.000-12.000mm)

Yield strength

Temperature [°C]	0.2% Proof strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

AlMg2,7Mn (F22)

Yield strength

Temperature [°C]	0.2% Proof strength [MPa]
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur

Classification

Treatment	Source description
blur	blur

AlMg2,7Mn (G25)

Yield strength

Temperature [°C]	0.2% Proof strength [MPa]
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur

Classification

Treatment	Source description
blur	blur

AlMg2,7Mn (G27)

Yield strength

Temperature [°C]	0.2% Proof strength [MPa]
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur

Classification

Treatment	Source description
blur	blur

AlMg2,7Mn | 3.3537 Material Datasheet

Material Test Series Values

Material Standard Values

Material Models for Simulation

Material Description

Chemical Composition

Mechanical Properties

Physical Properties

Young's Modulus [GPa] vs Temperature [°C]

Mean Coefficient of Thermal Expansion (reference 20°C) [10^-6*K^-1] vs Temperature [°C]

Cross Reference

Producer/Supplier/Trade names

Material Compliance

Formability - Bending - Folding

AlMg2,7Mn (3.3537; DIN 1725-1 : 1983-02)

Linear-elastic

Alternating stress

Yield strength

Coefficient thermal expansion

Specific heat

Density

Tensile strength

Thermal conductivity

Classification

Designation

AlMg2,7Mn (hot rolled; sheet; 4.000-25.000mm)

Yield strength

Tensile strength

Classification

AlMg2,7Mn (hot rolled; sheet; 25.000-50.000mm)

Yield strength

Tensile strength

Classification

AlMg2,7Mn (1/4 hard, stress-relieved; sheet; 4.000-6.000mm)

Yield strength

Tensile strength

Classification

AlMg2,7Mn (1/4 hard, stress-relieved; sheet; 6.000-12.000mm)

Yield strength

Tensile strength

Classification

AlMg2,7Mn (1/2 hard, stress-relieved; sheet; 4.000-6.000mm)

Yield strength

Tensile strength

Classification

AlMg2,7Mn (1/2 hard, stress-relieved; sheet; 6.000-12.000mm)

Yield strength

Tensile strength

Classification

AlMg2,7Mn (F22)

Yield strength

Tensile strength

Classification

AlMg2,7Mn (G25)

Yield strength

Tensile strength

Classification

AlMg2,7Mn (G27)

Yield strength

Tensile strength

Classification

Similar Materials