X5CrNi18-10 | 1.4301 Material Datasheet

Material Test Series Values

Material Standard Values

Material Models for Simulation

Unlock Exclusive Materials Data

Gain access to a wealth of materials data by joining our Materials Portal.

Material Description

Material Number	Material Number (single)	Standard	Range of Application	Standard Status	Country	Successor	Remark
1.4301 (DIN 17456 : 1999-02)	1.4301	DIN 17456 : 1999-02	DIN 17456 : 1999-02 replaced by DIN EN 10297-2 : 2006-02	Replaced	Germany	X5CrNi18-10	The material X5CrNi18-10 as a standard type of the CrNi-steels shows high corrosion resistance but no resistance to intercrystalline corrosion in sensitized condition. It is resistant in the delivery condition. The steel is well processable, suitable for mirror finishing and very good cold-workable. Application for welded parts in chemical apparatus engineering, food and milk industry, for household appliances, in breweries, in architecture and vehicle engineering as well as for pumps, compressors, fittings. Application in water and slightly contaminated sewages. Application temperature: -200 to 550 °C (for the comparable DIN-grade). It may be used as heat resistant steel acc. to DIN EN 10095.

Chemical Composition

C [%]	Cr [%]	Mn [%]	N [%]	Ni [%]	P [%]	S [%]	Si [%]	Source	Remark
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur

Mechanical Properties

Semi-finished Product	Condition	Nominal Size [mm]	Temperature [°C]	Specimen Direction	Tensile Strength [MPa]	Yield Strength [MPa]	Yield Strength (0.2% offset) [MPa]	Yield Strength (1.0% offset) [MPa]	Elongation A [%]	Source	Remark
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur

Material Compliance

REACh	RoHS
blur	blur

X5CrNi18-10 (1.4301; DIN 17456 : 1999-02)

Strain life

Temperature [°C]	Cyclic fatigue strength coefficient [MPa]	Cyclic fatigue strength exponent	Ductility coefficient [Pa]	Ductility exponent	Cyclic strength coefficient [MPa]	Cyclic strain hardening exponent	Young's modulus [GPa]
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur

Linear-elastic

Temperature [°C]	Young's modulus [GPa]	Poisson's ratio
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur

Alternating stress

Temperature [°C]	Stress ratio	Alternating stress [MPa]	Cycles
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur

Yield strength

Temperature [°C]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Source description
blur	blur

Designation

Designation	Material number	Source
blur	blur	blur

X5CrNi18-10 (hot rolled and solution heat-treated; sheet; 6mm; load drop)

Strain life

Temperature [°C]	Cyclic fatigue strength coefficient [MPa]	Cyclic fatigue strength exponent	Ductility coefficient [Pa]	Ductility exponent	Cyclic strength coefficient [MPa]	Cyclic strain hardening exponent	Young's modulus [GPa]
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Failure criteria	Source description
blur	blur	blur	blur	blur

X5CrNi18-10 (quenched (+Q); bar; 6mm; fracture)

Strain life

Temperature [°C]	Cyclic fatigue strength coefficient [MPa]	Cyclic fatigue strength exponent	Ductility coefficient [Pa]	Ductility exponent	Cyclic strength coefficient [MPa]	Cyclic strain hardening exponent	Young's modulus [GPa]
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Failure criteria	Source description
blur	blur	blur	blur	blur

X5CrNi18-10 (solution annealed (+AT); 6.35mm; load drop)

Strain life

Temperature [°C]	Cyclic fatigue strength coefficient [MPa]	Cyclic fatigue strength exponent	Ductility coefficient [Pa]	Ductility exponent	Cyclic strength coefficient [MPa]	Cyclic strain hardening exponent	Young's modulus [GPa]
blur	blur	blur	blur	blur	blur	blur	blur

Classification

Treatment	Dimension [mm]	Failure criteria	Source description
blur	blur	blur	blur

X5CrNi18-10 (sheet; 14mm; flaw)

Strain life

Temperature [°C]	Cyclic fatigue strength coefficient [MPa]	Cyclic fatigue strength exponent	Ductility coefficient [Pa]	Ductility exponent	Cyclic strength coefficient [MPa]	Cyclic strain hardening exponent	Young's modulus [GPa]
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur

Classification

Semi-finished product	Dimension [mm]	Failure criteria	Source description
blur	blur	blur	blur

X5CrNi18-10 (solution heat-treated and quenched; tube; 0.000-50.000mm)

Yield strength

Temperature [°C]	Yield strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

X5CrNi18-10 (solution heat-treated and quenched; tube)

Yield strength

Temperature [°C]	0.2% Proof strength [MPa]
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur

Classification

Treatment	Semi-finished product	Source description
blur	blur	blur

X5CrNi18-10 | 1.4301 Material Datasheet

Material Test Series Values

Material Standard Values

Material Models for Simulation

Material Description

Chemical Composition

Mechanical Properties

Material Compliance

X5CrNi18-10 (1.4301; DIN 17456 : 1999-02)

Strain life

Linear-elastic

Alternating stress

Yield strength

Tensile strength

Classification

Designation

X5CrNi18-10 (hot rolled and solution heat-treated; sheet; 6mm; load drop)

Strain life

Classification

X5CrNi18-10 (quenched (+Q); bar; 6mm; fracture)

Strain life

Classification

X5CrNi18-10 (solution annealed (+AT); 6.35mm; load drop)

Strain life

Classification

X5CrNi18-10 (sheet; 14mm; flaw)

Strain life

Classification

X5CrNi18-10 (solution heat-treated and quenched; tube; 0.000-50.000mm)

Yield strength

Tensile strength

Classification

X5CrNi18-10 (solution heat-treated and quenched; tube)

Yield strength

Classification

Similar Materials