C85S | 1.1269 Material Datasheet

Material Standard Values

Material Models for Simulation

Unlock Exclusive Materials Data

Gain access to a wealth of materials data by joining our Materials Portal.

Material Description

Material Number	Material Number (single)	Standard	Range of Application	Standard Status	Country	Successor	Remark
1.1269 (DIN EN 10132-4 : 2003-04)	1.1269	DIN EN 10132-4 : 2003-04	DIN EN 10132-4 : 2003-04 replaced by DIN EN 10132 : 2021-11	Replaced	Germany	C85S	The steel C85S is used as cold rolled strip for springs and special applications in thicknesses of up to 6 mm and as tempered cold strip in thicknesses from 0.30 to 3.00 mm. The cold-rolled steel strip for springs possess a very high precision of measurements and very good state of the surface.

Chemical Composition

C [%]	Cr [%]	Mn [%]	Mo [%]	Ni [%]	P [%]	S [%]	Si [%]	Source
blur	blur	blur	blur	blur	blur	blur	blur	blur

Mechanical Properties

Semi-finished Product	Condition	Nominal Size [mm]	Temperature [°C]	Tensile Strength [MPa]	Yield Strength (0.2% offset) [MPa]	Elongation A80 [%]	Hardness HB \| HBW	Hardness HRC	Hardness HV	Source	Remark
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur

Physical Properties

Temperature [°C]	Density [g/cm³]	Young's Modulus [GPa]	Mean Coefficient of Thermal Expansion (reference 20°C) [10^-6*K^-1]	Differential Coefficient of Thermal Expansion [10^-6*K^-1]	Thermal Conductivity [W/(m*K)]	Thermal Diffusivity [10^-6 m²/s]	Specific Electrical Resistance [µΩm]	Mean Specific Heat Capacity [kJ/(kg*K)]	True Specific Heat Capacity [kJ/(kg*K)]	Source
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur

Young's Modulus [GPa] vs Temperature [°C]

Exclusive Insight Locked!

This premium diagram is currently blurred. Gain full access to detailed insights and stay ahead with exclusive content.

Unlock Now

Mean Coefficient of Thermal Expansion (reference 20°C) [10^-6*K^-1] vs Temperature [°C]

Exclusive Insight Locked!

This premium diagram is currently blurred. Gain full access to detailed insights and stay ahead with exclusive content.

Unlock Now

Differential Coefficient of Thermal Expansion [10^-6*K^-1] vs Temperature [°C]

Exclusive Insight Locked!

This premium diagram is currently blurred. Gain full access to detailed insights and stay ahead with exclusive content.

Unlock Now

Heat Treatment

Heat Treatment	Temperature [°C]	Medium	Source
blur	blur	blur	blur

Cross Reference

Material Name	Country	Standard	Source
85	China	GB/T 1222	Stahlschlüssel 2016, Verlag Stahlschlüssel Wegst GmbH, Marbach
U20852	China	GB/T 1222	Stahlschlüssel 2016, Verlag Stahlschlüssel Wegst GmbH, Marbach
C85S	Europe	EN 10132-4
85C6	India	IS 2507	Stahlschlüssel 2016, Verlag Stahlschlüssel Wegst GmbH, Marbach
7	India	IS 2507	Stahlschlüssel 2016, Verlag Stahlschlüssel Wegst GmbH, Marbach
SK85-CSP	Japan	JIS G 4802	Stahlschlüssel 2016, Verlag Stahlschlüssel Wegst GmbH, Marbach
85	Russia	GOST 14959	Stahlschlüssel 2016, Verlag Stahlschlüssel Wegst GmbH, Marbach
85A	Russia	GOST 14959	Stahlschlüssel 2016, Verlag Stahlschlüssel Wegst GmbH, Marbach
A684 Grade 1086	USA	ASTM A684	Stahlschlüssel 2016, Verlag Stahlschlüssel Wegst GmbH, Marbach
1086	USA	AISI	Stahlschlüssel 2016, Verlag Stahlschlüssel Wegst GmbH, Marbach
G10860	USA	ASTM A684	Stahlschlüssel 2016, Verlag Stahlschlüssel Wegst GmbH, Marbach
Ck 85	Germany		Stahlschlüssel 2016, Verlag Stahlschlüssel Wegst GmbH, Marbach

Producer/Supplier/Trade names

Tradename	Supplier
Ck 85	Hoesch Hohenlimburg GmbH, Hagen
Ck 85	ThyssenKrupp Steel Europe AG, Duisburg
Ck 85	C.D. Wälzholz GmbH & Co. KG, Hagen
Ck 85	voestalpine AG, Linz
1.1269	INTERSTAHL Service GmbH, Wetter
1.1269	SIJ MWT GmbH, Landsberg am Lech
1.1269	DWK Drahtwerk Köln GmbH, Köln
BGH 1269	BGH Edelstahl Siegen GmbH
C85E	Hoesch Hohenlimburg GmbH, Hagen
C85E	ThyssenKrupp Steel Europe AG, Duisburg
C85E	C.D. Wälzholz GmbH & Co. KG, Hagen
C85E	voestalpine AG, Linz
C85S	ArcelorMittal Commercial Germany, Cologne
C85S	Chesterfield Special Cylinders Ltd, Sheffield
Ck 85	Walzwerke Einsal GmbH, Nachrodt
Ck 85	Willy Haecker GmbH, Hückeswagen
Ck 85	Stahlwerk Unna GmbH & Co.KG, Unna
Ck 85	Stahlrump GmbH & Co.KG, Iserlohn
Ck 85	Böllinghaus Steel GmbH, Hilden
Ck 85	HEINE + BEISSWENGER Stiftung + Co.KG, Fellbach
Ck 85	BWS, Iserlohn-Letmathe, Servicecenter/Verwaltung, Iserlohn
Ck 85	Deutsche Edelstahlwerke Specialty Steel GmbH & Co. KG, Witten
Ck 85	Sidenor Deutschland, Düsseldorf
Ck 85	Imet Industriemetall Handelsgesellschaft mbH, Hamburg
DE 1269	Dörrenberg Edelstahl GmbH, Engelskirchen
Eberle 15	J. N. Eberle & Cie. GmbH, Augsburg
Klöckner Ck 85	Klöckner & Co SE, Duisburg
THYROFORT Ck 85	Deutsche Edelstahlwerke Specialty Steel GmbH & Co. KG, Witten

Material Compliance

REACh	RoHS
blur	blur

C85S (1.1269; DIN EN 10132-4 : 2003-04)

Linear-elastic

Temperature [°C]	Young's modulus [GPa]	Poisson's ratio
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur

Alternating stress

Temperature [°C]	Stress ratio	Alternating stress [MPa]	Cycles
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur

Yield strength

Temperature [°C]	0.2% Proof strength [MPa]
blur	blur

Electrical resistivity

Temperature [°C]	Specific electrical resistance [µΩm]
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur

Coefficient thermal expansion

Related Temperature [°C]	Temperature [°C]	Coefficient thermal expansion [10^-6*K^-1]
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur

Specific heat

Temperature [°C]	Specific heat [kJ/(kg*K)]
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur

Density

Temperature [°C]	Density [g/cm³]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Thermal conductivity

Temperature [°C]	Thermal conductivity [W/(m*K)]
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur

Classification

WIAM Material	Source description
blur	blur

Designation

Designation	Material number	Source
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur

C85S (soft annealed or soft annealed and skin passed (+A or +A+LC); strip; 0.300-3.000mm)

Yield strength

Temperature [°C]	0.2% Proof strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

C85S (cold rolled (+CR); strip; 0.300-3.000mm)

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

C85S (quenched and tempered (+QT); strip; 0.300-3.000mm)

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

C85S | 1.1269 Material Datasheet

Material Standard Values

Material Models for Simulation

Material Description

Chemical Composition

Mechanical Properties

Physical Properties

Young's Modulus [GPa] vs Temperature [°C]

Mean Coefficient of Thermal Expansion (reference 20°C) [10^-6*K^-1] vs Temperature [°C]

Differential Coefficient of Thermal Expansion [10^-6*K^-1] vs Temperature [°C]

Heat Treatment

Cross Reference

Producer/Supplier/Trade names

Material Compliance

C85S (1.1269; DIN EN 10132-4 : 2003-04)

Linear-elastic

Alternating stress

Yield strength

Electrical resistivity

Coefficient thermal expansion

Specific heat

Density

Tensile strength

Thermal conductivity

Classification

Designation

C85S (soft annealed or soft annealed and skin passed (+A or +A+LC); strip; 0.300-3.000mm)

Yield strength

Tensile strength

Classification

C85S (cold rolled (+CR); strip; 0.300-3.000mm)

Tensile strength

Classification

C85S (quenched and tempered (+QT); strip; 0.300-3.000mm)

Tensile strength

Classification

Similar Materials