31CrMo12 | 1.8515 Material Datasheet

Material Test Series Values

Material Standard Values

Material Models for Simulation

Unlock Exclusive Materials Data

Gain access to a wealth of materials data by joining our Materials Portal.

Material Description

Material Number	Material Number (single)	Standard	Range of Application	Standard Status	Country	Predecessor	Successor	Remark
1.8515 (DIN EN 10085 : 2001-07)	1.8515	DIN EN 10085 : 2001-07	DIN EN 10085 : 2001-07 replaced by DIN EN ISO 683-5 : 2021-08	Replaced	Germany	31CrMo12	31CrMo12	The heat-treatable nitriding steel 31CrMo12 is applicated for heavy, wear-loaded machine components with a high surface hardness up to a dimension of 250 mm. For hot steam fitting components such as valve spindles application at dimensions up to 100 mm at maximum pressure for grinder and miller spindles. The steels contains nitriding agents (Cr) which contribute by the nitriding resp. nitrocarburization process with N resp. N and C to an increase of - case hardness - wear resistance - fatigue resistance and - corrosion resistance. Application for forged components: hardened, mechanically machined and thermochemical treated (e.g. nitriding)

Chemical Composition

C [%]	Cr [%]	Mn [%]	Mo [%]	P [%]	S [%]	Si [%]	Source
blur	blur	blur	blur	blur	blur	blur	blur

Mechanical Properties

Semi-finished Product	Condition	Nominal Size [mm]	Temperature [°C]	Tensile Strength [MPa]	Yield Strength [MPa]	Elongation A [%]	Hardness HB \| HBW	Hardness HV	Source	Remark
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur

Physical Properties

Temperature [°C]	Density [g/cm³]	Young's Modulus [GPa]	Mean Coefficient of Thermal Expansion (reference 20°C) [10^-6*K^-1]	Differential Coefficient of Thermal Expansion [10^-6*K^-1]	Thermal Conductivity [W/(m*K)]	Thermal Diffusivity [10^-6 m²/s]	Specific Electrical Resistance [µΩm]	Mean Specific Heat Capacity [kJ/(kg*K)]	True Specific Heat Capacity [kJ/(kg*K)]	Source
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur

Young's Modulus [GPa] vs Temperature [°C]

Exclusive Insight Locked!

This premium diagram is currently blurred. Gain full access to detailed insights and stay ahead with exclusive content.

Unlock Now

Mean Coefficient of Thermal Expansion (reference 20°C) [10^-6*K^-1] vs Temperature [°C]

Exclusive Insight Locked!

This premium diagram is currently blurred. Gain full access to detailed insights and stay ahead with exclusive content.

Unlock Now

Differential Coefficient of Thermal Expansion [10^-6*K^-1] vs Temperature [°C]

Exclusive Insight Locked!

This premium diagram is currently blurred. Gain full access to detailed insights and stay ahead with exclusive content.

Unlock Now

Toughness Data (Impact)

Semi-finished Product	Condition	Nominal Size [mm]	Temperature [°C]	Specimen Shape	Specimen Direction	Notch Impact Energy [J]	Source
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur

Heat Treatment

Heat Treatment	Step	Temperature [°C]	Holding Time [h]	Medium	Source	Remark
blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur

Cross Reference

Material Name	Country	Standard	Source
31CrMo12	Europe	EN 10085
31CrMo12	International	ISO 683-5	Stahlschlüssel 2016, Verlag Stahlschlüssel Wegst GmbH, Marbach

Producer/Supplier/Trade names

Tradename	Supplier
1.8515	H. Kleineberg GmbH, Stelle
1.8515	INTERSTAHL Service GmbH, Wetter
1.8515	Rosswag GmbH, Pfinztal-Kleinsteinbach
31CrMo12	Hoesch Hohenlimburg GmbH, Hagen
31CrMo12	Buderus Edelstahl GmbH, Wetzlar
31CrMo12	Swiss Steel International GmbH, Düsseldorf
31CrMo12	Hermann Stahlschmidt Stahlgesellschaft m. b. H., Willich
31CrMo12	Haage Anagramm Technologien GmbH, Mülheim a. d. Ruhr
31CrMo12	C.D. Wälzholz GmbH & Co. KG, Hagen
31CrMo12	Schmiedewerke Gröditz GmbH, Gröditz
31CrMo12	HEINE + BEISSWENGER Stiftung + Co.KG, Fellbach
31CrMo12	Tata Steel, IJmuiden
31CrMo12	Deutsche Edelstahlwerke Specialty Steel GmbH & Co. KG, Witten
31CrMo12	Sidenor Deutschland, Düsseldorf
31CrMo12	ASCOMETAL GmbH, Erkrath
31CrMo12	Hammerwerk Erft, G. Diederichs GmbH & Co. KG, Bad Münstereifel-Arloff
31CrMo12	pauly STAHLHANDEL, Essen
BGH 8515	BGH Edelstahl Siegen GmbH
BÖHLER V304	voestalpine BÖHLER Edelstahl GmbH & Co.KG, Kapfenberg
DIRO-31CrMo12	DIROSTAHL, Remscheid
GK 3	AUBERT & DUVAL Deutschland GmbH, München
Klöckner 31CrMo12	Klöckner & Co SE, Duisburg
NITRODUR 31CrMo12	Deutsche Edelstahlwerke Specialty Steel GmbH & Co. KG, Witten

Material Compliance

REACh	RoHS
blur	blur

FKM Guideline Fatigue Strength

Semi-finished Product	Condition	Nominal Size [mm]	Tensile Strength [MPa]	Yield Strength [MPa]	Fatigue Limit under rev. Tension-Compression Stresses [MPa]	Fatigue Strength under pulsating Tensile Stresses [MPa]	Bending Fatigue Strength [MPa]	Shear Fatigue Strength [MPa]	Torsion Fatigue Strength [MPa]	Constant a for size factor Kd for yield stress Rp	Constant a for size factor Kd for tensile strength Rm	Source	Remark
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur

31CrMo12 (1.8515; DIN EN 10085 : 2001-07)

Linear-elastic

Temperature [°C]	Young's modulus [GPa]	Poisson's ratio
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur

Alternating stress

Temperature [°C]	Stress ratio	Alternating stress [MPa]	Cycles
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur

Yield strength

Temperature [°C]	Yield strength [MPa]
blur	blur

Electrical resistivity

Temperature [°C]	Specific electrical resistance [µΩm]
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur

Coefficient thermal expansion

Related Temperature [°C]	Temperature [°C]	Coefficient thermal expansion [10^-6*K^-1]
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur

Specific heat

Temperature [°C]	Specific heat [kJ/(kg*K)]
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur

Density

Temperature [°C]	Density [g/cm³]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Thermal conductivity

Temperature [°C]	Thermal conductivity [W/(m*K)]
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur

Classification

WIAM Material	Source description
blur	blur

Designation

Designation	Material number	Source
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur

31CrMo12 (quenched and tempered (+QT); forging; 16.000-40.000mm)

Yield strength

Temperature [°C]	Yield strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

31CrMo12 (quenched and tempered (+QT); forging; 40.000-100.000mm)

Yield strength

Temperature [°C]	Yield strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

31CrMo12 (quenched and tempered (+QT); forging; 100.000-160.000mm)

Yield strength

Temperature [°C]	Yield strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

31CrMo12 (quenched and tempered (+QT); forging; 160.000-250.000mm)

Yield strength

Temperature [°C]	Yield strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

31CrMo12 (quenched and tempered (+QT); bar; 40.000mm)

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

31CrMo12 | 1.8515 Material Datasheet

Material Test Series Values

Material Standard Values

Material Models for Simulation

Material Description

Chemical Composition

Mechanical Properties

Physical Properties

Young's Modulus [GPa] vs Temperature [°C]

Mean Coefficient of Thermal Expansion (reference 20°C) [10^-6*K^-1] vs Temperature [°C]

Differential Coefficient of Thermal Expansion [10^-6*K^-1] vs Temperature [°C]

Toughness Data (Impact)

Heat Treatment

Cross Reference

Producer/Supplier/Trade names

Material Compliance

FKM Guideline Fatigue Strength

31CrMo12 (1.8515; DIN EN 10085 : 2001-07)

Linear-elastic

Alternating stress

Yield strength

Electrical resistivity

Coefficient thermal expansion

Specific heat

Density

Tensile strength

Thermal conductivity

Classification

Designation

31CrMo12 (quenched and tempered (+QT); forging; 16.000-40.000mm)

Yield strength

Tensile strength

Classification

31CrMo12 (quenched and tempered (+QT); forging; 40.000-100.000mm)

Yield strength

Tensile strength

Classification

31CrMo12 (quenched and tempered (+QT); forging; 100.000-160.000mm)

Yield strength

Tensile strength

Classification

31CrMo12 (quenched and tempered (+QT); forging; 160.000-250.000mm)

Yield strength

Tensile strength

Classification

31CrMo12 (quenched and tempered (+QT); bar; 40.000mm)

Tensile strength

Classification

Similar Materials