Compare Plastics, Metals, and More for Construction, Design, and Simulation - Materials Portal

ZP5 | ZP0410 Material Datasheet

Material Standard Values

Unlock Exclusive Materials Data

Gain access to a wealth of materials data by joining our Materials Portal.

Register for Free or Upgrade for Full Access

Material Description

Material Number	Material Name	Material Number (single)	Standard	Scope	Standard Status	Country	Predecessor	VDA 231-106 classification
ZP0410 (DIN EN 12844 : 1999-01)	ZP5	ZP0410	DIN EN 12844 : 1999-01	Supersedes DIN 1743-2 : 1978-04	Valid	Germany	GD-ZnAl4Cu1	3.3	1)
1) Remark: The material ZP5 with the material number ZP0410 is the preferred alloy for pressure castings. In its property profile, the alloy combines good mechanical properties with good resistance to corrosion, good dimensional accuracy und stability of accurate dimensions as well as with the possibility to galvanically deposit almost all metals on castings of this alloy. With observance of increased purity and of suitable processing circumstances, the material is applicable in extreme climatic conditions. The tensile strength depends on the wall thickness. With the wall thickness of the casting becoming smaller, the strength increases. The casting temperature ought to be about 425 degrees C (450 degrees C maximum) the forming temperature (pressure casting) is to be adjusted to about 180 to 250 degrees C maximum. According to DIN EN 12844, the alternating stress fatigue strength (time strength) is 56 N/mm² with 100 million reversals of stress the creep life (0.5 per cent, 3000 h) is 100 N/mm². The temperature coefficient of the length is 27 µm/m*K.

Chemical Composition

Al [%]	Cd [%]	Cu [%]	Fe [%]	Mg [%]	Ni [%]	Pb [%]	Si [%]	Sn [%]	Remainder
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	1)2)
1) Source: blur
2) Remark: blur

Material Compliance

REACh	RoHS
blur	blur

Mechanical Properties

Semi-finished Product	Temperature [°C]	Tensile Strength [MPa]	Yield Strength (0.2% offset) [MPa]	Elongation A [%]	Elongation A50 [%]	Hardness HB \| HBW
blur	blur	blur	blur	blur	blur	blur	1)2)
blur	blur	blur	blur	blur	blur	blur	3)4)
blur	blur	blur	blur	blur	blur	blur	3)5)
blur	blur	blur	blur	blur	blur	blur	3)6)
1) Source: blur
2) Remark: blur
3) Source: blur
4) Remark: blur
5) Remark: blur
6) Remark: blur

Physical Properties

Temperature [°C]	Melting Temperature [°C]	Density [g/cm³]	Young's Modulus [GPa]	Thermal Conductivity [W/(m*K)]	Specific Electrical Resistance [µΩm]	Electric Conductivity [MS/m]
blur	blur	blur	blur	blur	blur	blur	1)2)
blur	blur	blur	blur	blur	blur	blur	1)
1) Source: blur
2) Remark: blur

Toughness Data (Impact)

Semi-finished Product	Temperature [°C]	Notch Impact Energy [J]
blur	blur	blur	1)2)
1) Source: blur
2) Remark: blur

Cross Reference

Material Name	Country	Standard
Z-A4U1	France	NF A 55-102
Legierung B	Great Britain	BS 1004
G-ZnAl4Cu1	Italy	UNI 3717
ZnAl4Cu1	Norway	NS 16930
FZnAl4Cu1Mg	Portugal	NP 1632/31
ZnAl4Cu1	Sweden	SIS 147020
ZnAl4Cu1	Spain	UNE 37302-88
B86 Alloy 5	USA	ASTM B86
Z35532	USA	UNS
GD-ZnAl4Cu1	Germany	DIN 1743-2
2.2141	Germany	DIN 1743-2
Z410	Germany	DIN 1743-2