X5CrNi18-10 | 1.4301 Material Datasheet

Unlock Exclusive Materials Data

Gain access to a wealth of materials data by joining our Materials Portal.

Material Description

Material Number	Material Name	Material Number (single)	Standard	Scope	Standard Status	Country	Predecessor	Successor	VDA 231-106 classification
1.4301 (DIN EN 10216-5 : 2004-11)	X5CrNi18-10	1.4301	DIN EN 10216-5 : 2004-11	DIN EN 10216-5 : 2004-11 replaced by DIN EN 10216-5 : 2014-03	Replaced	Germany	X5CrNi18-10	X5CrNi18-10	1.1.2	1)
1) Remark: X5CrNi18-10 as a standard type of the CrNi-steels is comparable to X 5 CrNi 18 10 acc. to DIN 17440 : 1985-07 (invalid). It shows high corrosion resistance but no resistance to intercrystalline corrosion in sensitized condition. It is resistant in delivery condition. The steel is well processable, suitable for mirror finishing and very good cold-workable. Application for welded parts in chemical apparatus engineering, food and milk industry, for household appliances, in breweries, in architecture and vehicle engineering as well as for pumps, compressors, fittings. Application in water and slightly contaminated sewages. Application temperature: -200 to 550 deg. (for the comparable DIN-mark). X5CrNi18-10 is used in construction trade for decorations in exterior and interior architecture, e.g. roof and wall elements, facings, washing facilities, washbasins, for doors and windows. This material is permitted for load-bearing components. This brand may be used as heat resistant steel acc. to DIN EN 10095 : 1999-05.

Chemical Composition

C [%]	Cr [%]	Mn [%]	N [%]	Ni [%]	P [%]	S [%]	Si [%]	Remainder
blur	blur	blur	blur	blur	blur	blur	blur	blur	1)2)
1) Source: blur
2) Remark: blur

Material Compliance

REACh	RoHS
blur	blur

Mechanical Properties

Semi-finished Product	Condition	Nominal Size [mm]	Temperature [°C]	Specimen Direction	Tensile Strength [MPa]	Yield Strength (0.2% offset) [MPa]	Yield Strength (1.0% offset) [MPa]	Elongation A [%]
blur	blur	blur	blur	blur	blur	blur	blur	blur	1)2)
blur	blur		blur	blur	blur	blur		blur	1)2)
blur	blur	blur	blur			blur	blur		1)
blur	blur	blur	blur			blur	blur		1)
blur	blur	blur	blur			blur	blur		1)
blur	blur	blur	blur			blur	blur		1)
blur	blur	blur	blur			blur	blur		1)
blur	blur	blur	blur			blur	blur		1)
blur	blur	blur	blur			blur	blur		1)
blur	blur	blur	blur			blur	blur		1)
blur	blur	blur	blur			blur	blur		1)
blur	blur	blur	blur			blur	blur		1)
blur	blur	blur	blur			blur	blur		1)
1) Source: blur
2) Remark: blur

Physical Properties

Temperature [°C]	Density [g/cm³]	Young's Modulus [GPa]	Shear Modulus [GPa]	Poisson's Ratio	Mean Coefficient of Thermal Expansion (reference 20°C) [10^-6*K^-1]	Differential Coefficient of Thermal Expansion [10^-6*K^-1]	Thermal Conductivity [W/(m*K)]	Thermal Diffusivity [10^-6 m²/s]	Specific Electrical Resistance [µΩm]	Mean Specific Heat Capacity [kJ/(kg*K)]	True Specific Heat Capacity [kJ/(kg*K)]
blur		blur			blur	blur	blur	blur	blur	blur	blur	1)
blur		blur			blur	blur	blur	blur	blur	blur	blur	1)
blur	blur	blur			blur	blur	blur	blur	blur	blur	blur	1)
blur		blur			blur	blur	blur	blur	blur	blur	blur	1)
blur		blur			blur	blur	blur	blur	blur	blur	blur	1)
blur		blur			blur	blur	blur	blur	blur	blur	blur	1)
blur		blur			blur	blur	blur	blur	blur	blur	blur	1)
blur		blur			blur	blur	blur	blur	blur	blur	blur	1)
blur		blur			blur	blur	blur	blur	blur	blur	blur	1)
blur		blur			blur	blur	blur	blur	blur	blur	blur	1)
blur		blur			blur	blur	blur	blur	blur	blur	blur	1)
blur				blur								2)3)
blur		blur	blur	blur								4)5)
blur		blur	blur	blur								4)5)
blur		blur	blur	blur								4)5)
blur		blur	blur	blur								4)5)
blur		blur	blur	blur								4)5)
blur		blur	blur	blur								4)5)
blur		blur	blur	blur								4)5)
blur		blur	blur	blur								4)5)
1) Source: blur
2) Source: blur
3) Remark: blur
4) Source: blur
5) Remark: blur

Cross Reference

Material Name	Country	Standard
0Cr18Ni9	China	GB/T 13296
1Cr19Ni9	China	GB/T 13296
S30210	China	GB/T 13296
S30408	China	GB/T 13296
SUS304TB	Japan	JIS G 3463
SUS304TF	Japan	JIS G 3467
STS304TB	South Korea	KS D 3577
S30400	USA	UNS
304	USA	ASME SA 213
304	USA	ASTM A 213

Producer/Supplier/Trade names

Tradename	Supplier
SAW	Dörrenberg Edelstahl GmbH, Engelskirchen
DMV 304	Salzgitter Mannesmann Stainless Tubes GmbH, Mülheim an der Ruhr
VALIMA 304	Salzgitter Mannesmann Stainless Tubes GmbH, Mülheim an der Ruhr
5R10	SANDVIK Materials TEchnology Deutschland GmbH, Düsseldorf
SANMAC 304	SANDVIK Materials TEchnology Deutschland GmbH, Düsseldorf
A500	Schoeller-Bleckmann Edelstahlrohr GmbH, Ternitz

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
blur									blur

Density

Temperature [°C]	Density [g/cm³]
blur	blur

Linear-elastic

Temperature [°C]	Young's modulus [GPa]	Shear modulus [GPa]	Poisson's ratio
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur			blur
blur			blur
blur			blur
blur			blur
blur			blur
blur			blur
blur			blur
blur			blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Strain life

Temperature [°C]	Static hardening coefficient [MPa]	Static hardening exponent	Cyclic fatigue strength coefficient [MPa]	Cyclic fatigue strength exponent	Ductility coefficient [Pa]	Ductility exponent	Cyclic strength coefficient [MPa]	Cyclic strain hardening exponent	Young's modulus [GPa]
blur			blur	blur	blur	blur	blur	blur	blur
blur			blur	blur	blur	blur	blur	blur	blur

Alternating stress

Temperature [°C]	Stress ratio	Alternating stress [MPa]	Cycles
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur

Coefficient thermal expansion

Related Temperature [°C]	Temperature [°C]	Coefficient thermal expansion [10^-6*K^-1]
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur

Specific heat

Temperature [°C]	Specific heat [kJ/(kg*K)]
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur

Thermal conductivity

Temperature [°C]	Thermal conductivity [W/(m*K)]
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur

Electrical resistivity

Temperature [°C]	Specific electrical resistance [µΩm]
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur

Designation

Designation	Material number	Source
blur	blur	blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur		blur				blur

Strain life

Temperature [°C]	Cyclic fatigue strength coefficient [MPa]	Cyclic fatigue strength exponent	Ductility coefficient [Pa]	Ductility exponent	Cyclic strength coefficient [MPa]	Cyclic strain hardening exponent	Young's modulus [GPa]
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur		blur				blur

Strain life

Temperature [°C]	Cyclic fatigue strength coefficient [MPa]	Cyclic fatigue strength exponent	Ductility coefficient [Pa]	Ductility exponent	Cyclic strength coefficient [MPa]	Cyclic strain hardening exponent	Young's modulus [GPa]
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
		blur	blur		blur				blur

Strain life

Temperature [°C]	Static hardening coefficient [MPa]	Static hardening exponent	Cyclic fatigue strength coefficient [MPa]	Cyclic fatigue strength exponent	Ductility coefficient [Pa]	Ductility exponent	Cyclic strength coefficient [MPa]	Cyclic strain hardening exponent	Young's modulus [GPa]
blur			blur	blur	blur	blur	blur	blur	blur
blur			blur	blur	blur	blur	blur	blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur		blur		blur				blur

Strain life

Temperature [°C]	Static hardening coefficient [MPa]	Static hardening exponent	Cyclic fatigue strength coefficient [MPa]	Cyclic fatigue strength exponent	Ductility coefficient [Pa]	Ductility exponent	Cyclic strength coefficient [MPa]	Cyclic strain hardening exponent	Young's modulus [GPa]
blur			blur	blur	blur	blur	blur	blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur							blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

X5CrNi18-10 | 1.4301 Material Datasheet

Material Test Series Values

Material Standard Values

Material Models for Simulation

Material Description

Chemical Composition

Material Compliance

Mechanical Properties

Physical Properties

Cross Reference

Producer/Supplier/Trade names

X5CrNi18-10 (1.4301; DIN EN 10216-5 : 2004-11)

Classification

Density

Linear-elastic

Yield strength

Tensile strength

Strain life

Alternating stress

Coefficient thermal expansion

Specific heat

Thermal conductivity

Electrical resistivity

Designation

X5CrNi18-10 (hot rolled and solution heat-treated; sheet; 6mm; load drop)

Classification

Strain life

X5CrNi18-10 (quenched (+Q); bar; 6mm; fracture)

Classification

Strain life

X5CrNi18-10 (sheet; 14mm; flaw)

Classification

Strain life

X5CrNi18-10 (solution annealed (+AT); 6.35mm; load drop)

Classification

Strain life

X5CrNi18-10 (solution annealed (+AT); tube)

Classification

Yield strength

Tensile strength

X5CrNi18-10 (solution annealed (+AT); tube; 0.000-60.000mm)

Classification

Yield strength

Tensile strength

Similar Materials

Diagram Settings

Diagram Preview

Data Values

Series Points