X2CrNi19-11 | 1.4306 Material Datasheet

Unlock Exclusive Materials Data

Gain access to a wealth of materials data by joining our Materials Portal.

Material Description

Material Number	Material Name	Material Number (single)	Standard	Scope	Standard Status	Country	Successor	VDA 231-106 classification	Application temperature [°C]
1.4306 (DIN EN 10028-7 : 2000-06)	X2CrNi19-11	1.4306	DIN EN 10028-7 : 2000-06	DIN EN 10028-7 : 2000-06 replaced by DIN EN 10028-7 : 2008-02	Replaced	Germany	X2CrNi19-11	1.1.2	≤ 300	1)
1) Remark: The material X2CrNi19-11, a modification of 1.4301, is comparable to X 2CrNi 19 11 acc. to DIN 17440-85. Due to the lowered C-content the steel shows i.e. increased resistance to intercrystalline corrosion also in sensitized condition. Application in chemical apparatus engineering and in pharmaceutical industry, especially for demands on high wall-thickness and concurrent suitability for mirror-polishing. In nuclear reactor engineering, for parts in food industry exposed to organic or fruit acids in oil, soap and synthetic fibre industry. Generally up to pH-value 4,5 resistant in aggressive media that are poor in chloride. Approved for pressure vessel construction up to 300 °C, otherwise subject to authorization.

Chemical Composition

C [%]	Cr [%]	Mn [%]	N [%]	Ni [%]	P [%]	S [%]	Si [%]	Remainder
blur	blur	blur	blur	blur	blur	blur	blur	blur	1)
1) Source: blur

Material Compliance

REACh	RoHS
blur	blur

Mechanical Properties

Semi-finished Product	Condition	Nominal Size [mm]	Temperature [°C]	Specimen Direction	Tensile Strength [MPa]	Yield Strength (0.2% offset) [MPa]	Yield Strength (1.0% offset) [MPa]	Elongation A [%]	Elongation A80 [%]
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	1)2)
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	1)2)
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	1)3)
blur	blur	blur	blur	blur	blur					1)2)
blur	blur	blur	blur	blur	blur					1)2)
blur	blur	blur	blur	blur	blur					1)3)
1) Source: blur
2) Remark: blur
3) Remark: blur

Toughness Data (Impact)

Semi-finished Product	Condition	Nominal Size [mm]	Temperature [°C]	Specimen Shape	Specimen Direction	Notch Impact Energy [J]
blur	blur	blur	blur	blur	blur	blur	1)2)
blur	blur	blur	blur	blur	blur	blur	1)2)
blur	blur	blur	blur	blur	blur	blur	1)2)
blur	blur	blur	blur	blur	blur	blur	1)2)
blur	blur	blur	blur	blur	blur	blur	1)2)
blur	blur	blur	blur	blur	blur	blur	1)2)
1) Source: blur
2) Remark: blur

Heat Treatment

Heat Treatment	Temperature [°C]
blur	blur	1)
blur	blur	1)
1) Source: blur

Cross Reference

Material Name	Country	Standard
304 L	Australia	AS 1449
00Ch18N11	Bulgaria	BDS 6738
00Cr19Ni11	China	GB 1220-84
17249	Czech Republik/Slovakia	CSN 417249
X2CrNi19-11	Europe	EN 10028-7
720	Finland	SFS 700
X 2 CrNi 18 10	Finland	SFS 700
Z 2 CN 18-10	France	NF A 35-574
304 S 11	Great Britain	BS 970
03Ch18N11	Russia	GOST 5632
10	International	ISO 683/13-86
X 2 CrNi 18 11	Italy	UNI 6901
SUS 304 L	Japan	JIS G 4303
14360	Norway	NS 14001
X 2 CrNi 19 11 S	Austria	M 3120
OOH18N10	Poland	PN 86020
2NiCr185	Romania	STAS 3583
2352	Sweden	MNC 900 E
F.3503-X 2 CrNi 18 10	Spain	UNE 36-016
S30403	USA	UNS
304L	USA	ASTM A 240

Producer/Supplier/Trade names

Tradename	Supplier
1.4306	Saarstahl AG, Völklingen
1.4306	Walzwerke Einsal GmbH, Nachrodt
1.4306	ZAPP AG, Ratingen
1.4306	Rolf Kind GmbH, Gummersbach
1.4306	Sprint Metal Edelstahlziehereien GmbH, Hemer
1.4306	NIRONIT Edelstahlhandel GmbH, Rosengarten
1.4306	H. Kleineberg GmbH, Stelle
1.4306	ROPA STAHLVERTRIEB GMBH, Bad Bergzabern
1.4306	INOX SERVICE CENTER GmbH, Krefeld
1.4306	STAPPERT Deutschland GmbH, Düsseldorf
1.4306	INTERSTAHL Service GmbH, Wetter
1.4306	Rosswag GmbH, Pfinztal-Kleinsteinbach
304 L	ThyssenKrupp Stainless International GmbH, Krefeld
4306	Swiss Steel International GmbH, Düsseldorf
4306	Edelstahlservice GmbH, Frankfurt/M.
4306	BESSEY Tool GmbH & Co. KG, Bietigheim-Bissingen
4306	Binder Edelstahl Produktionsgesellschaft mbH, Bremen
4306	BWS, Iserlohn-Letmathe, Servicecenter/Verwaltung, Iserlohn
4306	K. D. Feddersen & Co. Ueberseegesellschaft mbH, Hamburg
4306.0 BÖHLER A 600	voestalpine High Perfomance Metals Deutschland GmbH, Düsseldorf
A600	Schoeller-Bleckmann Edelstahlrohr GmbH, Ternitz
Almenit 4306	Almenit, Mittelberg
almet 1.4306	ALMET AG, Remshalden
ALZ 304 L	ALZ-Naamloze Vennootschap, Industrieterrein, Genk
ARGESTE 4306	Zapp Precision Metals GmbH, Schwerte
AVESTA-SHEFFIELD 19-11L	Outokumpu GmbH, Willich
BGH 4306	BGH Edelstahl Siegen GmbH
BÖHLER A600	voestalpine BÖHLER Edelstahl GmbH & Co.KG, Kapfenberg
BÖHLER A604	voestalpine BÖHLER Edelstahl GmbH & Co.KG, Kapfenberg
CHRONIMO 1.4306	Chronimo Edelstahl GmbH, Barsbüttel
CLI 18-10 L	Industeel Deutschland GmbH, Grevenbroich
Cogne 304L	COGNE Edelstahl GmbH, Neuss
Coracid 4306	Chr. Höver & Sohn GmbH & Co. KG, Lindlar
DE 4306	Dörrenberg Edelstahl GmbH, Engelskirchen
DN-4306 ST	Deutsche Nickel GmbH, Schwerte
DOMINIAL RAN 304 L	Kind & Co., Edelstahlwerk, Wiehl
Edel 1.4306	ET Edelstahl-Trading GmbH, Willich
HAFESTA B 2 WL	Hagener Feinstahl GmbH, Hagen
Inox 1.4306	INOX-Stahlgesellschaft mbH, Nürtingen
INOX 4306-304L	TPS-Technitube Röhrenwerke GmbH, Daun
Klöckner 1.4306	Klöckner & Co SE, Duisburg
Koro 4306	Koring + Rottsieper Edelstahl GmbH + Co.KG, Remscheid
Märker Irrubigo 4306	Schmidt + Clemens GmbH + Co. KG, Edelstahlwerk Kaiserau, Lindlar
NIROSTA 4306	Deutsche Edelstahlwerke Specialty Steel GmbH & Co. KG, Witten
NIROSTA 4306	Outokumpu Nirosta GmbH, Krefeld
PHY 4306 HQ	Aperam Stainless Europe, Paris
PHY R 304L	Aperam Stainless Europe, Paris
PHY R 4306	Aperam Stainless Europe, Paris
POLARIT 720	Outokumpu Deutschland GmbH, Düsseldorf
REMANIT 4306	Deutsche Edelstahlwerke Specialty Steel GmbH & Co. KG, Witten
Rodinox 1.4306	ATI Flat Rolled Products GmbH, Remscheid
RP 06	Gustav Grimm Edelstahlwerk GmbH & Co. KG, Remscheid
RS 18 NC	Chr. Höver & Sohn GmbH & Co KG, Lindlar
SANDVIK 3R11	SANDVIK Materials TEchnology Deutschland GmbH, Düsseldorf
SANDVIK 3R12	SANDVIK Materials TEchnology Deutschland GmbH, Düsseldorf
SANDVIK 3R13	SANDVIK Materials TEchnology Deutschland GmbH, Düsseldorf
SANDVIK SANMAC 304L	SANDVIK Materials TEchnology Deutschland GmbH, Düsseldorf
SINOX SH 1 LC	Schoellerwerk GmbH & Co. KG, Hellenthal/Eifel
THENOX 4306	C.D. Wälzholz GmbH & Co. KG, Hagen
TS 4306	ThyssenKrupp Schulte GmbH, Essen
UGIMA 4306	Aperam Stainless Europe, Paris
UGIMA 4306 FG	Aperam Stainless Europe, Paris
UGINE 4306	Aperam Stainless Europe, Paris
UGINE 4306 FG	Aperam Stainless Europe, Paris
UGINOX 18-10 L	Aperam Stainless Europe, Paris
VLX 304 L	Vallourec Deutschland GmbH, Düsseldorf
X 18 B.C	AUBERT & DUVAL Deutschland GmbH, München
X2CrNi19-11	Hoesch Hohenlimburg GmbH, Hagen
X2CrNi19-11	Salzgitter Flachstahl GmbH, Salzgitter
X2CrNi19-11	voestalpine AG, Linz
X2CrNi19-11	Platestahl Umformtechnik GmbH, Lüdenscheid
X2CrNi19-11	Haage Anagramm Technologien GmbH, Mülheim a. d. Ruhr
X2CrNi19-11	Böllinghaus Steel GmbH, Hilden
X2CrNi19-11	Schmiedewerke Gröditz GmbH, Gröditz
X2CrNi19-11	M. Woite GmbH, Erkrath
X2CrNi19-11	HEINE + BEISSWENGER Stiftung + Co.KG, Fellbach
X2CrNi19-11	Tata Steel, IJmuiden
X2CrNi19-11	EZM Edelstahlzieherei Mark GmbH, Wetter

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
blur									blur

Linear-elastic

Temperature [°C]	Young's modulus [GPa]	Poisson's ratio
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur		blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Strain life

Temperature [°C]	Static hardening coefficient [MPa]	Static hardening exponent	Cyclic fatigue strength coefficient [MPa]	Cyclic fatigue strength exponent	Ductility coefficient [Pa]	Ductility exponent	Cyclic strength coefficient [MPa]	Cyclic strain hardening exponent	Young's modulus [GPa]
blur			blur	blur	blur	blur	blur	blur	blur
blur			blur	blur	blur	blur	blur	blur	blur

Alternating stress

Temperature [°C]	Stress ratio	Alternating stress [MPa]	Cycles
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur

Designation

Designation	Material number	Source
blur	blur	blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur		blur				blur

Strain life

Temperature [°C]	Cyclic fatigue strength coefficient [MPa]	Cyclic fatigue strength exponent	Ductility coefficient [Pa]	Ductility exponent	Cyclic strength coefficient [MPa]	Cyclic strain hardening exponent	Young's modulus [GPa]
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur		blur				blur

Strain life

Temperature [°C]	Cyclic fatigue strength coefficient [MPa]	Cyclic fatigue strength exponent	Ductility coefficient [Pa]	Ductility exponent	Cyclic strength coefficient [MPa]	Cyclic strain hardening exponent	Young's modulus [GPa]
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
		blur	blur		blur				blur

Strain life

Temperature [°C]	Static hardening coefficient [MPa]	Static hardening exponent	Cyclic fatigue strength coefficient [MPa]	Cyclic fatigue strength exponent	Ductility coefficient [Pa]	Ductility exponent	Cyclic strength coefficient [MPa]	Cyclic strain hardening exponent	Young's modulus [GPa]
blur			blur	blur	blur	blur	blur	blur	blur
blur			blur	blur	blur	blur	blur	blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur		blur		blur				blur

Strain life

Temperature [°C]	Static hardening coefficient [MPa]	Static hardening exponent	Cyclic fatigue strength coefficient [MPa]	Cyclic fatigue strength exponent	Ductility coefficient [Pa]	Ductility exponent	Cyclic strength coefficient [MPa]	Cyclic strain hardening exponent	Young's modulus [GPa]
blur			blur	blur	blur	blur	blur	blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

X2CrNi19-11 | 1.4306 Material Datasheet

Material Test Series Values

Material Standard Values

Material Models for Simulation

Material Description

Chemical Composition

Material Compliance

Mechanical Properties

Toughness Data (Impact)

Heat Treatment

Cross Reference

Producer/Supplier/Trade names

X2CrNi19-11 (1.4306; DIN EN 10028-7 : 2000-06)

Classification

Linear-elastic

Yield strength

Tensile strength

Strain life

Alternating stress

Designation

X2CrNi19-11 (hot rolled and solution heat-treated; sheet; 6mm; load drop)

Classification

Strain life

X2CrNi19-11 (quenched (+Q); bar; 6mm; fracture)

Classification

Strain life

X2CrNi19-11 (sheet; 14mm; flaw)

Classification

Strain life

X2CrNi19-11 (solution annealed (+AT); 6.35mm; load drop)

Classification

Strain life

X2CrNi19-11 (solution annealed (+AT); sheet; 0.000-75.000mm)

Classification

Yield strength

Tensile strength

X2CrNi19-11 (solution annealed (+AT); strip; 0.000-13.500mm)

Classification

Yield strength

Tensile strength

X2CrNi19-11 (solution annealed (+AT); strip; 0.000-6.000mm)

Classification

Yield strength

Tensile strength

Similar Materials

Diagram Settings

Diagram Preview

Data Values

Series Points