EN AW-Al Mn1 | EN AW-3103 Material Datasheet

Unlock Exclusive Materials Data

Gain access to a wealth of materials data by joining our Materials Portal.

Material Description

Material Number	Material Name	Material Number (single)	Standard	Scope	Standard Status	Country	Predecessor	Successor	VDA 231-106 classification
EN AW-3103 (DIN EN 573-3 : 2009-08)	EN AW-Al Mn1	EN AW-3103	DIN EN 573-3 : 2009-08	DIN EN 573-3 : 2009-08 replaced by DIN EN 573-3 : 2013-12	Replaced	Germany	EN AW-Al Mn1	EN AW-Al Mn1	2.1	1)
1) Remark: Material EN AW-Al Mn1is produced for sheet metal, strip, plates, pressed and rolled billets, centre punching, HF-welded tubes, prematerial for heat exchanger (Finstock) and wire resp. prewire for mechanical applications. The alloy is used for prematerial for cans, caps and stopper as well as for wire and prewire for welding applications. It is food-safe. To the comparable mark AlMn1, material No. 3.0515, acc. to DIN1725-1 : 1983-02 applies: The alloy AlMn1 is a AlMn-alloy pertaining to naturally hard aluminium materials. A strength increase can only be achieved by cold forming, not by controlled heat treatment. It is highly resistant to corrosion, ideal for deforming and welding. These qualities are very similar to pure aluminium, but EN AW-Al Mn1achieves a higher strength. The alloy AlMn1 has in comparison to pure aluminium an increased high-temperature strength as a result of the recrystallisation inhibiting effect of the Mn-addition. Application: in costruction trade for roofing, as outer panelling for buildings, in apparatus and tank construction as heat exchanger (bank of tubes, profiles, finned pipes, sheet metals), for coolings, air-conditioning systems, pipelines for compressed-gas tanks, for pressure tanks acc. to VdTüV- Werkstoffblätter, as aerials for directional radio and satellite communication (mirrors), for technical extruded parts, for solid rivets, for metallic signs in general, in food industry (incl. commercial devices), in vehicle manufacturing (incl. tank waggons) and as packaging (sheet-metal packing in general).

Chemical Composition

Cr [%]	Cu [%]	Fe [%]	Mg [%]	Mn [%]	Si [%]	Zn [%]	Ti+Zr [%]	Remainder
blur	blur	blur	blur	blur	blur	blur	blur	blur	1)2)
1) Source: blur
2) Remark: blur

Material Compliance

REACh	RoHS
blur	blur

Mechanical Properties

Semi-finished Product	Condition	Designation of the delivered Condition DIN	Strength Abbrevation	Nominal Size [mm]	Temperature [°C]	Specimen Direction	Tensile Strength [MPa]	Yield Strength (0.2% offset) [MPa]	Elongation A100 [%]	Elongation A [%]	Elongation A50 [%]	Hardness HB \| HBW
blur	blur			blur	blur		blur	blur	blur				1)
blur	blur			blur	blur		blur	blur	blur				1)
blur	blur			blur	blur		blur	blur	blur				1)
blur	blur			blur	blur		blur	blur			blur		2)3)
blur	blur			blur	blur		blur	blur			blur		2)3)
blur	blur			blur	blur		blur	blur			blur		2)3)
blur	blur			blur	blur		blur	blur			blur		2)3)
blur	blur			blur	blur		blur	blur			blur		2)3)
blur	blur			blur	blur		blur	blur			blur		2)3)
blur	blur			blur	blur		blur	blur		blur	blur		2)3)
blur	blur			blur	blur		blur	blur		blur	blur		2)3)
blur	blur	blur		blur	blur								2)3)
blur	blur			blur	blur		blur	blur			blur		4)5)
blur	blur			blur	blur		blur	blur			blur		4)5)
blur	blur			blur	blur		blur	blur			blur		4)5)
blur	blur			blur	blur		blur	blur			blur		4)5)
blur	blur			blur	blur		blur	blur			blur		4)5)
blur	blur			blur	blur		blur	blur			blur		4)5)
blur	blur				blur		blur	blur		blur			6)
blur	blur				blur		blur	blur		blur			6)
blur	blur				blur		blur	blur		blur			6)
blur	blur				blur		blur	blur		blur			6)
blur	blur	blur		blur	blur		blur	blur			blur	blur	7)8)
blur	blur	blur		blur	blur		blur	blur			blur	blur	7)8)
blur	blur	blur		blur	blur		blur	blur			blur	blur	7)8)
blur	blur	blur		blur	blur		blur	blur			blur	blur	7)8)
blur	blur	blur		blur	blur		blur	blur			blur	blur	7)8)
blur	blur	blur		blur	blur		blur	blur		blur		blur	7)8)
blur	blur			blur	blur		blur	blur			blur	blur	7)8)
blur	blur			blur	blur		blur	blur		blur		blur	7)8)
blur	blur	blur		blur	blur		blur	blur			blur	blur	7)8)
blur	blur	blur		blur	blur		blur	blur			blur	blur	7)8)
blur	blur	blur		blur	blur		blur	blur			blur	blur	7)8)
blur	blur	blur		blur	blur		blur	blur			blur	blur	7)8)
blur	blur	blur		blur	blur		blur	blur			blur	blur	7)8)
blur	blur	blur		blur	blur		blur	blur		blur		blur	7)8)
blur	blur	blur		blur	blur		blur	blur			blur	blur	7)8)
blur	blur	blur		blur	blur		blur	blur			blur	blur	7)8)
blur	blur	blur		blur	blur		blur	blur			blur	blur	7)8)
blur	blur	blur		blur	blur		blur	blur			blur	blur	7)8)
blur	blur	blur		blur	blur		blur	blur		blur		blur	7)8)
blur	blur	blur		blur	blur		blur	blur			blur	blur	7)8)
blur	blur	blur		blur	blur		blur	blur			blur	blur	7)8)
blur	blur	blur		blur	blur		blur	blur			blur	blur	7)8)
blur	blur	blur		blur	blur		blur	blur			blur	blur	7)8)
blur	blur	blur		blur	blur		blur	blur			blur	blur	7)8)
blur	blur	blur		blur	blur		blur	blur			blur	blur	7)8)
blur	blur	blur		blur	blur		blur	blur			blur	blur	7)8)
blur	blur	blur		blur	blur		blur	blur			blur	blur	7)8)
blur	blur	blur		blur	blur		blur	blur			blur	blur	7)8)
blur	blur	blur		blur	blur		blur	blur			blur	blur	7)8)
blur	blur	blur		blur	blur		blur	blur			blur	blur	7)8)
blur	blur	blur		blur	blur		blur	blur			blur	blur	7)8)
blur	blur	blur		blur	blur		blur	blur			blur	blur	7)8)
blur	blur	blur		blur	blur		blur	blur			blur	blur	7)8)
blur	blur	blur		blur	blur		blur	blur			blur	blur	7)8)
blur	blur	blur		blur	blur		blur	blur			blur	blur	7)8)
blur	blur	blur		blur	blur		blur	blur			blur	blur	7)8)
blur	blur	blur		blur	blur		blur	blur			blur	blur	7)8)
blur	blur	blur		blur	blur		blur	blur			blur	blur	7)8)
blur	blur	blur		blur	blur		blur						7)8)
blur	blur	blur		blur	blur		blur	blur			blur	blur	7)8)
blur	blur	blur		blur	blur		blur	blur			blur	blur	7)8)
blur	blur	blur		blur	blur		blur	blur			blur	blur	7)8)
blur	blur	blur		blur	blur		blur	blur			blur	blur	7)8)
blur	blur	blur		blur	blur		blur	blur			blur	blur	7)8)
blur	blur	blur		blur	blur		blur	blur		blur		blur	7)8)
blur	blur	blur		blur	blur	blur	blur				blur		9)10)
blur	blur	blur		blur	blur	blur	blur				blur		9)10)
blur	blur	blur		blur	blur	blur	blur				blur		9)10)
blur	blur	blur		blur	blur	blur	blur				blur		9)10)
blur	blur	blur		blur	blur	blur	blur				blur		9)10)
blur	blur	blur		blur	blur	blur	blur				blur		9)10)
blur	blur	blur		blur	blur	blur	blur				blur		9)10)
blur	blur	blur		blur	blur	blur	blur				blur		9)10)
blur	blur	blur		blur	blur	blur	blur				blur		9)10)
blur	blur	blur		blur	blur	blur	blur				blur		9)10)
blur	blur	blur		blur	blur	blur	blur				blur		9)10)
blur	blur	blur		blur	blur	blur	blur				blur		9)10)
blur	blur	blur		blur	blur	blur	blur				blur		9)10)
blur	blur	blur		blur	blur	blur	blur				blur		9)10)
blur	blur	blur		blur	blur	blur	blur				blur		9)10)
blur	blur	blur		blur	blur	blur	blur				blur		9)10)
blur	blur	blur		blur	blur		blur	blur	blur		blur		3)11)
blur	blur	blur		blur	blur		blur	blur	blur		blur		3)11)
blur	blur	blur		blur	blur		blur	blur	blur		blur		3)11)
blur	blur	blur		blur	blur		blur	blur	blur		blur		3)11)
blur	blur	blur		blur	blur		blur	blur	blur		blur		3)11)
blur	blur	blur		blur	blur		blur	blur	blur		blur		3)11)
blur	blur	blur		blur	blur		blur	blur	blur		blur		3)11)
blur	blur	blur		blur	blur		blur	blur	blur		blur		3)11)
blur	blur	blur		blur	blur		blur	blur	blur		blur		3)11)
blur	blur	blur		blur	blur		blur	blur	blur		blur		3)11)
blur	blur			blur			blur	blur		blur	blur	blur	12)13)
blur	blur			blur	blur		blur	blur		blur	blur	blur	12)13)
blur	blur			blur			blur	blur		blur	blur	blur	12)13)
blur	blur	blur		blur	blur		blur	blur		blur	blur	blur	12)13)
blur	blur			blur			blur	blur		blur	blur	blur	12)13)
blur	blur	blur		blur	blur		blur	blur		blur	blur	blur	12)13)
blur	blur			blur			blur	blur		blur	blur	blur	12)13)
blur	blur	blur		blur	blur		blur	blur		blur	blur	blur	12)13)
blur	blur	blur		blur	blur		blur	blur		blur	blur	blur	12)13)
blur	blur			blur	blur		blur	blur		blur	blur	blur	12)14)
blur	blur			blur	blur		blur	blur		blur	blur	blur	12)15)
blur	blur	blur		blur	blur		blur	blur		blur	blur	blur	12)14)
blur	blur	blur		blur	blur		blur	blur		blur	blur	blur	12)15)
blur	blur	blur		blur	blur		blur	blur		blur	blur	blur	12)14)
blur	blur	blur		blur	blur		blur	blur		blur	blur	blur	12)15)
blur	blur	blur		blur	blur		blur	blur		blur	blur	blur	12)14)
blur	blur	blur		blur	blur		blur	blur		blur	blur	blur	12)15)
blur	blur	blur		blur	blur		blur	blur		blur	blur	blur	12)14)
blur	blur	blur		blur	blur		blur	blur		blur	blur	blur	12)15)
blur	blur				blur		blur	blur		blur	blur	blur	13)16)
blur	blur				blur		blur	blur		blur	blur	blur	13)16)
blur	blur	blur			blur		blur	blur		blur	blur	blur	13)16)
blur	blur	blur			blur		blur	blur		blur	blur	blur	13)16)
blur	blur				blur		blur	blur		blur	blur	blur	16)17)
blur	blur				blur		blur	blur		blur	blur	blur	16)17)
blur	blur	blur			blur		blur	blur		blur	blur	blur	16)17)
blur	blur	blur			blur		blur	blur		blur	blur	blur	16)17)
blur	blur				blur		blur	blur		blur	blur	blur	13)16)
blur	blur	blur			blur		blur	blur		blur	blur	blur	13)16)
	blur		blur		blur		blur	blur		blur			18)19)
	blur		blur		blur		blur	blur		blur			18)19)
	blur		blur		blur		blur	blur		blur			18)19)
	blur		blur		blur		blur	blur		blur			18)20)
	blur		blur		blur		blur	blur		blur			18)20)
	blur		blur		blur		blur	blur		blur			18)20)
	blur		blur		blur		blur	blur		blur			18)20)
	blur		blur		blur		blur	blur		blur			18)20)
	blur		blur		blur		blur	blur		blur			18)20)
	blur		blur		blur		blur	blur		blur			18)20)
	blur		blur		blur		blur	blur		blur			18)19)
	blur		blur		blur		blur	blur		blur			18)19)
	blur		blur		blur		blur	blur		blur			18)19)
	blur		blur		blur		blur	blur		blur			18)20)
	blur		blur		blur		blur	blur		blur			18)20)
	blur		blur		blur		blur	blur		blur			18)20)
	blur		blur		blur		blur	blur		blur			18)20)
	blur		blur		blur		blur	blur		blur			18)20)
	blur		blur		blur		blur	blur		blur			18)20)
	blur		blur		blur		blur	blur		blur			18)20)
	blur		blur		blur		blur	blur		blur			18)19)
	blur		blur		blur		blur	blur		blur			18)19)
	blur		blur		blur		blur	blur		blur			18)19)
	blur		blur		blur		blur	blur		blur			18)20)
	blur		blur		blur		blur	blur		blur			18)20)
	blur		blur		blur		blur	blur		blur			18)20)
	blur		blur		blur		blur	blur		blur			18)20)
	blur		blur		blur		blur	blur		blur			18)20)
	blur		blur		blur		blur	blur		blur			18)20)
	blur		blur		blur		blur	blur		blur			18)20)
1) Source: blur
2) Source: blur
3) Remark: blur
4) Source: blur
5) Remark: blur
6) Source: blur
7) Source: blur
8) Remark: blur
9) Source: blur
10) Remark: blur
11) Source: blur
12) Source: blur
13) Remark: blur
14) Remark: blur
15) Remark: blur
16) Source: blur
17) Remark: blur
18) Source: blur
19) Remark: blur
20) Remark: blur

Physical Properties

Temperature [°C]	Melting Temperature [°C]	Density [g/cm³]	Young's Modulus [GPa]	Shear Modulus [GPa]	Poisson's Ratio	Thermal Conductivity [W/(m*K)]	Specific Electrical Resistance [µΩm]	Mean Specific Heat Capacity [kJ/(kg*K)]	Electric Conductivity [MS/m]
	blur									1)
	blur									2)
	blur									3)
blur		blur				blur		blur	blur	1)4)
blur				blur						4)5)
blur		blur	blur	blur	blur	blur	blur	blur		2)6)
blur		blur	blur			blur	blur		blur	3)7)
1) Source: blur
2) Source: blur
3) Source: blur
4) Remark: blur
5) Source: blur
6) Remark: blur
7) Remark: blur

FKM Guideline Fatigue Strength

Semi-finished Product	Condition	Nominal Size [mm]	Tensile Strength [MPa]	Yield Strength (0.2% offset) [MPa]	Elongation A [%]	Elongation A50 [%]	Fatigue Limit under rev. Tension-Compression Stresses [MPa]	Fatigue Strength under pulsating Tensile Stresses [MPa]	Bending Fatigue Strength [MPa]	Shear Fatigue Strength [MPa]	Torsion Fatigue Strength [MPa]
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	1)2)
blur	blur		blur	blur	blur	blur	blur	blur	blur	blur	blur	1)2)
blur	blur		blur	blur	blur	blur	blur	blur	blur	blur	blur	1)2)
blur	blur		blur	blur	blur	blur	blur	blur	blur	blur	blur	1)2)
blur	blur		blur	blur	blur	blur	blur	blur	blur	blur	blur	1)2)
blur	blur		blur	blur	blur	blur	blur	blur	blur	blur	blur	1)2)
blur	blur		blur	blur	blur	blur	blur	blur	blur	blur	blur	1)2)
blur	blur		blur	blur	blur	blur	blur	blur	blur	blur	blur	1)2)
blur	blur		blur	blur	blur	blur	blur	blur	blur	blur	blur	1)2)
blur	blur		blur	blur	blur	blur	blur	blur	blur	blur	blur	1)2)
blur	blur		blur	blur	blur	blur	blur	blur	blur	blur	blur	1)2)
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	1)3)
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	1)3)
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	1)4)
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	1)4)
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	1)2)
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	1)2)
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	1)3)
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	1)4)
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	1)2)
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	1)3)
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	1)4)
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	1)2)
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	1)3)
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	1)4)
1) Source: blur
2) Remark: blur
3) Remark: blur
4) Remark: blur

Formability - Bending - Folding

Semi-finished Product	Condition	Nominal Size [mm]	Bend Factor (90°)	Bend Factor (180°)
blur	blur	blur	blur	blur	1)
blur	blur	blur	blur	blur	1)
blur	blur	blur	blur		1)
blur	blur	blur	blur	blur	1)
blur	blur	blur	blur	blur	1)
blur	blur	blur	blur		1)
blur	blur	blur	blur	blur	1)
blur	blur	blur	blur	blur	1)
blur	blur	blur	blur	blur	1)
blur	blur	blur	blur		1)
blur	blur	blur	blur		1)
blur	blur	blur	blur	blur	1)
blur	blur	blur	blur	blur	1)
blur	blur	blur	blur		1)
blur	blur	blur	blur		1)
blur	blur	blur	blur	blur	1)
blur	blur	blur	blur	blur	1)
blur	blur	blur	blur	blur	1)
blur	blur	blur	blur	blur	1)
blur	blur	blur	blur		1)
blur	blur	blur	blur		1)
blur	blur	blur	blur		1)
blur	blur	blur	blur	blur	1)
blur	blur	blur	blur	blur	1)
blur	blur	blur	blur	blur	1)
blur	blur	blur	blur		1)
blur	blur	blur	blur		1)
blur	blur	blur	blur	blur	1)
blur	blur	blur	blur	blur	1)
blur	blur	blur	blur		1)
blur	blur	blur	blur		1)
blur	blur	blur	blur	blur	1)
blur	blur	blur	blur	blur	1)
blur	blur	blur	blur	blur	1)
blur	blur	blur	blur		1)
blur	blur	blur	blur		1)
blur	blur	blur	blur		1)
1) Source: blur

Cross Reference

Material Name	Country	Standard
3103	China	GB/T 3880
3103	USA	International Registration Record (AA)
AlMn1	International	ISO 209-1
30031	South Africa	SABS 712
Al-Mn1	South Africa	SABS 712
AlMn1	Turkey	TS 412
A93103	USA	UNS
AlMn1 (3.0515)	Germany	DIN 1725-1
AlMn1 (3.0515)	Germany	DIN 1745-1

Producer/Supplier/Trade names

Tradename	Supplier
Aluman-100	Alu Menziken Extrusion AG, Reinach
AlMn1	Aluminiumwerk Unna AG, Unna
AlMn1	F.W. Brökelmann Aluminiumwerk GmbH + Co. KG, Ense-Höing
EN AW-AlMn1	Martinrea Honsel Germany GmbH, Meschede
EN AW-AlMn1	TRIMET ALUMINIUM AG, Essen
AG15	OTTO FUCHS KG, Meinerzhagen

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur								blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
blur									blur

Density

Temperature [°C]	Density [g/cm³]
blur	blur

Linear-elastic

Temperature [°C]	Young's modulus [GPa]	Shear modulus [GPa]	Poisson's ratio
blur	blur
blur	blur
blur		blur
blur			blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur

Alternating stress

Temperature [°C]	Stress ratio	Alternating stress [MPa]	Cycles
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur

Specific heat

Temperature [°C]	Specific heat [kJ/(kg*K)]
blur	blur

Thermal conductivity

Temperature [°C]	Thermal conductivity [W/(m*K)]
blur	blur

Electrical resistivity

Temperature [°C]	Specific electrical resistance [µΩm]
blur	blur

Designation

Designation	Material number	Source
blur	blur	blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur							blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur							blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur							blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur							blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur							blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur							blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur							blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur							blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur							blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur								blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur							blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur							blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur							blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur								blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur							blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur							blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
	blur	blur	blur						blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur
blur		blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur

EN AW-Al Mn1 | EN AW-3103 Material Datasheet

Material Standard Values

Material Models for Simulation

Material Description

Chemical Composition

Material Compliance

Mechanical Properties

Physical Properties

FKM Guideline Fatigue Strength

Formability - Bending - Folding

Cross Reference

Producer/Supplier/Trade names

EN AW-Al Mn1 (1/2 hard)

Classification

Yield strength

Tensile strength

EN AW-Al Mn1 (EN AW-3103; DIN EN 573-3 : 2009-08)

Classification

Density

Linear-elastic

Yield strength

Tensile strength

Alternating stress

Specific heat

Thermal conductivity

Electrical resistivity

Designation

EN AW-Al Mn1 (H11 (strain-hardened - 1/8 hard); tube; 0.000-17.000mm)

Classification

Yield strength

Tensile strength

EN AW-Al Mn1 (H111 (annealed and slightly strain-hardened (less than H11) during subsequent operations such as stretching or levelling); rod)

Classification

Yield strength

Tensile strength

EN AW-Al Mn1 (H111 (annealed and slightly strain-hardened (less than H11) during subsequent operations such as stretching or levelling); rod; 0.000-60.000mm)

Classification

Yield strength

Tensile strength

EN AW-Al Mn1 (H111 (annealed and slightly strain-hardened (less than H11) during subsequent operations such as stretching or levelling); rod; 0.000-80.000mm)

Classification

Yield strength

Tensile strength

EN AW-Al Mn1 (H111 (annealed and slightly strain-hardened (less than H11) during subsequent operations such as stretching or levelling); strip; 0.200-0.500mm)

Classification

Yield strength

Tensile strength

EN AW-Al Mn1 (H111 (annealed and slightly strain-hardened (less than H11) during subsequent operations such as stretching or levelling); strip; 0.500-1.500mm)

Classification

Yield strength

Tensile strength

EN AW-Al Mn1 (H111 (annealed and slightly strain-hardened (less than H11) during subsequent operations such as stretching or levelling); strip; 1.500-3.000mm)

Classification

Yield strength

Tensile strength

EN AW-Al Mn1 (H111 (annealed and slightly strain-hardened (less than H11) during subsequent operations such as stretching or levelling); strip; 12.000-50.000mm)

Classification

Yield strength

Tensile strength

EN AW-Al Mn1 (H111 (annealed and slightly strain-hardened (less than H11) during subsequent operations such as stretching or levelling); strip; 3.000-6.000mm)

Classification

Yield strength

Tensile strength

EN AW-Al Mn1 (H111 (annealed and slightly strain-hardened (less than H11) during subsequent operations such as stretching or levelling); strip; 6.000-12.000mm)

Classification

Yield strength

Tensile strength

EN AW-Al Mn1 (H111 (annealed and slightly strain-hardened (less than H11) during subsequent operations such as stretching or levelling); tube)

Classification

Yield strength

Tensile strength

EN AW-Al Mn1 (H111 (annealed and slightly strain-hardened (less than H11) during subsequent operations such as stretching or levelling); tube; 0.000-20.000mm)

Classification

Yield strength

Tensile strength

EN AW-Al Mn1 (H112 (slightly strain-hardened from working at an elevated temperature or from a limited amount of cold work); extrusion)

Classification

Yield strength

Tensile strength

EN AW-Al Mn1 (H112 (slightly strain-hardened from working at an elevated temperature or from a limited amount of cold work); rod)