Compare Plastics, Metals, and More for Construction, Design, and Simulation

30CrNiMo8 | 1.6580 Material Datasheet

Unlock Exclusive Materials Data

Gain access to a wealth of materials data by joining our Materials Portal.

Material Description

Material Number	Material Number (single)	Standard	Scope	Standard Status	Country	Predecessor	Successor	Application temperature [°C]	VDA 231-106 classification
1.6580 (DIN EN 10083-1 : 1996-10)	1.6580	DIN EN 10083-1 : 1996-10	DIN EN 10083-1 : 1996-10 replaced by DIN EN 10083-1/-2 : 2006-10 and DIN EN 10083-3 : 2007-01	Replaced	Germany	30 CrNiMo 8	30CrNiMo8	≥ -40	1.1	1)
1) Remark: Steel 30CrNiMo8 is suitable for high loaded parts (also large forged parts) with high heat-treatment sections and favorable toughness properties in aircraft and heavy-vehicle construction, machine engineering (e.g. propeller shafts, connecting rods, transmission shafts). Furthermore for large forged parts (e.g. rotors, shafts, discs). Lowest working temperature -40 °C.

Chemical Composition

C [%]	Cr [%]	Mn [%]	Mo [%]	Ni [%]	P [%]	S [%]	Si [%]
blur	blur	blur	blur	blur	blur	blur	blur	1)
1) Source: blur

Mechanical Properties

Semi-finished Product	Condition	Nominal Size [mm]	Temperature [°C]	Tensile Strength [MPa]	Yield Strength [MPa]	Elongation A [%]	Reduction of Area [%]	Hardness HB \| HBW
blur	blur	blur	blur	blur	blur	blur	blur	blur	1)2)
blur	blur	blur	blur	blur	blur	blur	blur	blur	1)2)
blur	blur	blur	blur	blur	blur	blur	blur	blur	1)2)
blur	blur	blur	blur	blur	blur	blur	blur	blur	1)2)
blur	blur	blur	blur	blur	blur	blur	blur	blur	1)2)
blur	blur	blur	blur	blur	blur	blur	blur	blur	1)
blur	blur	blur	blur	blur	blur	blur	blur	blur	1)
blur	blur	blur	blur	blur	blur	blur	blur	blur	1)
blur	blur	blur	blur	blur	blur	blur	blur	blur	1)
blur	blur	blur	blur	blur	blur	blur	blur	blur	1)
blur	blur	blur	blur	blur	blur	blur	blur	blur	1)3)
blur	blur	blur	blur	blur	blur	blur	blur	blur	1)4)
1) Source: blur
2) Remark: blur
3) Remark: blur
4) Remark: blur

Toughness Data (Impact)

Semi-finished Product	Condition	Nominal Size [mm]	Temperature [°C]	Specimen Shape	Specimen Direction	Notch Impact Energy [J]
blur	blur	blur	blur	blur	blur	blur	1)
blur	blur	blur	blur	blur	blur	blur	1)
blur	blur	blur	blur	blur	blur	blur	1)
blur	blur	blur	blur	blur	blur	blur	1)
blur	blur	blur	blur	blur	blur	blur	1)
blur	blur	blur	blur	blur	blur	blur	1)
blur	blur	blur	blur	blur	blur	blur	1)
blur	blur	blur	blur	blur	blur	blur	1)
blur	blur	blur	blur	blur	blur	blur	1)
blur	blur	blur	blur	blur	blur	blur	1)
1) Source: blur

Heat Treatment

Heat Treatment	Step	Temperature [°C]	Holding Time [h]	Medium
blur	blur	blur	blur	blur	1)
blur	blur	blur	blur	blur	1)2)
blur	blur	blur	blur	blur	1)
blur	blur	blur	blur	blur	1)
1) Source: blur
2) Remark: blur

Cross Reference

Material Name	Country	Standard
30 CrNiMo 8	Belgium	NBN 253-02
30 CND 8	France	NF A 35-552
830 M 30	Great Britain	BS 970/1
31CrNiMo8	International	ISO 683-1
30NiCrMo8	Italy	UNI 7874
SNCM 630	Japan	JIS G 4103
30 H2N2M	Poland	PN 84035
2534	Sweden	MNC 852 E
32 NiCrMo 16	Spain	UNE 36-012
E4340	USA	ASTM A 322
30 CrNiMo 8	Germany	DIN 17200

Producer/Supplier/Trade names

Tradename	Supplier
1.6580	Platestahl Umformtechnik GmbH, Lüdenscheid
1.6580	H. Kleineberg GmbH, Stelle
1.6580	INOX SERVICE CENTER GmbH, Krefeld
1.6580	INTERSTAHL Service GmbH, Wetter
1.6580	Rosswag GmbH, Pfinztal-Kleinsteinbach
1.6580	ET Edelstahl-Trading GmbH, Willich
1.6580	Imet Industriemetall Handelsgesellschaft mbH, Hamburg
1.6580	SIJ MWT GmbH, Landsberg am Lech
1.6580	Wilhelm Oberste-Beulmann GmbH & Co. KG, Remscheid
30CrNiMo8	ThyssenKrupp Steel Europe AG, Duisburg
30CrNiMo8	Saarstahl AG, Völklingen
30CrNiMo8	Georgsmarienhütte GmbH, Georgsmarienhütte
30CrNiMo8	Hayes-Lemmerz-Werke GmbH, Königswinter
30CrNiMo8	Swiss Steel International GmbH, Düsseldorf
30CrNiMo8	Walzwerke Einsal GmbH, Nachrodt
30CrNiMo8	Willy Haecker GmbH, Hückeswagen
30CrNiMo8	Hagenkötter GmbH & Co., Solingen
30CrNiMo8	Chr. Höver & Sohn GmbH & Co KG, Lindlar
30CrNiMo8	Hermann Stahlschmidt Stahlgesellschaft m. b. H., Willich
30CrNiMo8	Stahlwerk Unna GmbH & Co.KG, Unna
30CrNiMo8	ZAPP AG, Ratingen
30CrNiMo8	Haage Anagramm Technologien GmbH, Mülheim a. d. Ruhr
30CrNiMo8	C.D. Wälzholz GmbH & Co. KG, Hagen
30CrNiMo8	BESSEY Tool GmbH & Co. KG, Bietigheim-Bissingen
30CrNiMo8	WDI - Westfälische Drahtindustrie GmbH, Hamm
30CrNiMo8	Schmiedewerke Gröditz GmbH, Gröditz
30CrNiMo8	OVAKO STAHL GmbH, Erkrath
30CrNiMo8	Vallourec Deutschland GmbH, Düsseldorf
30CrNiMo8	Stahlwerk Annahütte Max Aicher GmbH & Co. KG, Hammerau
30CrNiMo8	voestalpine AG, Linz
30CrNiMo8	HEINE + BEISSWENGER Stiftung + Co.KG, Fellbach
30CrNiMo8	Tata Steel, IJmuiden
30CrNiMo8	EZM Edelstahlzieherei Mark GmbH, Wetter
30CrNiMo8	Günther + Schramm GmbH, Oberkochen
30CrNiMo8	ASCOMETAL GmbH, Erkrath
30CrNiMo8	Klöckner & Co SE, Duisburg
30CrNiMo8	Salzgitter Mannesmann Stahlhandel GmbH, Düsseldorf
30CrNiMo8	Hammerwerk Erft, G. Diederichs GmbH & Co. KG, Bad Münstereifel-Arloff
30CrNiMo8	STM Stahl Vertriebs GmbH, Gräfelfing
30CrNiMo8	Edelstahlwerk C. & F. vom Brocke e.K., Altena-Altroggenrahmede
30CrNiMo8	BFG Feinguss Niederrhein GmbH, Moers
30CrNiMo8	Wilhelm Jungermann GmbH, Remscheid
30CrNiMo8	ORI MARTIN Deutschland GmbH, Duisburg
30CrNiMo8	pauly STAHLHANDEL, Essen
30CrNiMo8	Deutsche Edelstahlwerke Specialty Steel GmbH & Co. KG, Siegen
836 J	AUBERT & DUVAL Deutschland GmbH, München
BGH 6580	BGH Edelstahl Siegen GmbH
BÖHLER V 145	voestalpine High Perfomance Metals Deutschland GmbH, Düsseldorf
Buderus 30CrNiMo8	Buderus Edelstahl GmbH, Wetzlar
CNM 8	Aubert&Duval Special Steel GmbH, Mönchengladbach
DE 6580	Dörrenberg Edelstahl GmbH, Engelskirchen
DIRO-30CrNiMo8	DIROSTAHL, Remscheid
THYROFORT 30CrNiMo8	Deutsche Edelstahlwerke Specialty Steel GmbH & Co. KG, Witten
V145	voestalpine BÖHLER Edelstahl GmbH & Co.KG, Kapfenberg
V145	Stahl Judenburg GmbH, Judenburg

Material Compliance

REACh	RoHS
blur	blur

Hardenability (Jominy test)

Condition	Front Distance [mm]	Hardness HRC (+H grade)	Hardness HRC (+HH grade)	Hardness HRC (+HL grade)
blur	blur	blur	blur	blur	1)2)
blur	blur	blur	blur	blur	1)2)
blur	blur	blur	blur	blur	1)2)
blur	blur	blur	blur	blur	1)2)
blur	blur	blur	blur	blur	1)2)
blur	blur	blur	blur	blur	1)2)
blur	blur	blur	blur	blur	1)2)
blur	blur	blur	blur	blur	1)2)
blur	blur	blur	blur	blur	1)2)
blur	blur	blur	blur	blur	1)2)
blur	blur	blur	blur	blur	1)2)
blur	blur	blur	blur	blur	1)2)
blur	blur	blur	blur	blur	1)2)
blur	blur	blur	blur	blur	1)2)
blur	blur	blur	blur	blur	1)2)
1) Source: blur
2) Remark: blur

Strain life

Temperature [°C]	Static hardening coefficient [MPa]	Static hardening exponent	Cyclic fatigue strength coefficient [MPa]	Cyclic fatigue strength exponent	Ductility coefficient [Pa]	Ductility exponent	Cyclic strength coefficient [MPa]	Cyclic strain hardening exponent	Young's modulus [GPa]
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur

Linear-elastic

Temperature [°C]	Young's modulus [GPa]	Bulk modulus [GPa]	Shear modulus [GPa]	Poisson's ratio
blur	blur	blur	blur	blur
blur	blur	blur	blur	blur
blur	blur	blur	blur	blur
blur	blur	blur	blur	blur
blur	blur	blur	blur	blur

Alternating stress

Temperature [°C]	Stress ratio	Mean stress [MPa]	Alternating stress [MPa]	Cycles
blur	blur	blur	blur	blur
blur	blur	blur	blur	blur
blur	blur	blur	blur	blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur	blur	blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur

Designation

Designation	Material number	Source
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur

Strain life

Temperature [°C]	Static hardening coefficient [MPa]	Static hardening exponent	Cyclic fatigue strength coefficient [MPa]	Cyclic fatigue strength exponent	Ductility coefficient [Pa]	Ductility exponent	Cyclic strength coefficient [MPa]	Cyclic strain hardening exponent	Young's modulus [GPa]
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur

Strain life

Temperature [°C]	Static hardening coefficient [MPa]	Static hardening exponent	Cyclic fatigue strength coefficient [MPa]	Cyclic fatigue strength exponent	Ductility coefficient [Pa]	Ductility exponent	Cyclic strength coefficient [MPa]	Cyclic strain hardening exponent	Young's modulus [GPa]
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur

Strain life

Temperature [°C]	Static hardening coefficient [MPa]	Static hardening exponent	Cyclic fatigue strength coefficient [MPa]	Cyclic fatigue strength exponent	Ductility coefficient [Pa]	Ductility exponent	Cyclic strength coefficient [MPa]	Cyclic strain hardening exponent	Young's modulus [GPa]
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur

Strain life

Temperature [°C]	Static hardening coefficient [MPa]	Static hardening exponent	Cyclic fatigue strength coefficient [MPa]	Cyclic fatigue strength exponent	Ductility coefficient [Pa]	Ductility exponent	Cyclic strength coefficient [MPa]	Cyclic strain hardening exponent	Young's modulus [GPa]
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur

Strain life

Temperature [°C]	Static hardening coefficient [MPa]	Static hardening exponent	Cyclic fatigue strength coefficient [MPa]	Cyclic fatigue strength exponent	Ductility coefficient [Pa]	Ductility exponent	Cyclic strength coefficient [MPa]	Cyclic strain hardening exponent	Young's modulus [GPa]
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur

Strain life

Temperature [°C]	Static hardening coefficient [MPa]	Static hardening exponent	Cyclic fatigue strength coefficient [MPa]	Cyclic fatigue strength exponent	Ductility coefficient [Pa]	Ductility exponent	Cyclic strength coefficient [MPa]	Cyclic strain hardening exponent	Young's modulus [GPa]
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur

Strain life

Temperature [°C]	Static hardening coefficient [MPa]	Static hardening exponent	Cyclic fatigue strength coefficient [MPa]	Cyclic fatigue strength exponent	Ductility coefficient [Pa]	Ductility exponent	Cyclic strength coefficient [MPa]	Cyclic strain hardening exponent	Young's modulus [GPa]
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur

Strain life

Temperature [°C]	Static hardening coefficient [MPa]	Static hardening exponent	Cyclic fatigue strength coefficient [MPa]	Cyclic fatigue strength exponent	Ductility coefficient [Pa]	Ductility exponent	Cyclic strength coefficient [MPa]	Cyclic strain hardening exponent	Young's modulus [GPa]
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur	blur	blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur	blur	blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur	blur	blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur	blur	blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur	blur	blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur

Strain life

Temperature [°C]	Static hardening coefficient [MPa]	Static hardening exponent	Cyclic fatigue strength coefficient [MPa]	Cyclic fatigue strength exponent	Ductility coefficient [Pa]	Ductility exponent	Cyclic strength coefficient [MPa]	Cyclic strain hardening exponent	Young's modulus [GPa]
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur	blur	blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur	blur	blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur	blur	blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur	blur	blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur

Yield strength

Temperature [°C]	0.1% Proof strength [MPa]	0.2% Proof strength [MPa]	Yield strength [MPa]
blur	blur	blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

WIAM Material	Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Rolling direction	Maximum stress [MPa]	Strain at maximum stress [%]	Source description
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur

30CrNiMo8 | 1.6580 Material Datasheet

Material Test Series Values

Material Standard Values

Material Models for Simulation

Material Description

Chemical Composition

Mechanical Properties

Toughness Data (Impact)

Heat Treatment

Cross Reference

Producer/Supplier/Trade names

Material Compliance

Hardenability (Jominy test)

30CrNiMo8 (1.6580; DIN EN 10083-1 : 1996-10)

Strain life

Linear-elastic

Alternating stress

Yield strength

Tensile strength

Classification

Designation

30CrNiMo8 (9mm)

Strain life

Classification

30CrNiMo8 (normalized, normalized and tempered (+N+NT); bar; 15mm; fracture)

Strain life

Classification

30CrNiMo8 (normalized, normalized and tempered (+N+NT); bar; 5-10mm; fracture)

Strain life

Classification

30CrNiMo8 (normalized, normalized and tempered (+N+NT); bar; 5-16mm; flaw)

Strain life

Classification

30CrNiMo8 (normalized, normalized and tempered (+N+NT); bar; 6mm; flaw)

Strain life

Classification

30CrNiMo8 (normalized, normalized and tempered (+N+NT); bar; 7-8mm; fracture)

Strain life

Classification

30CrNiMo8 (normalized, normalized and tempered (+N+NT); bar; 8mm; fracture)

Strain life

Classification

30CrNiMo8 (quenched and tempered (+QT); bar; 5-16mm; flaw)

Strain life

Classification

30CrNiMo8 (quenched and tempered (+QT); drop forging; 0.000-16.000mm)

Yield strength

Tensile strength

Classification

30CrNiMo8 (quenched and tempered (+QT); drop forging; 100.000-160.000mm)

Yield strength

Tensile strength

Classification

30CrNiMo8 (quenched and tempered (+QT); drop forging; 16.000-40.000mm)

Yield strength

Tensile strength

Classification

30CrNiMo8 (quenched and tempered (+QT); drop forging; 160.000-250.000mm)

Yield strength

Tensile strength

Classification

30CrNiMo8 (quenched and tempered (+QT); drop forging; 40.000-100.000mm)

Yield strength

Tensile strength

Classification

30CrNiMo8 (quenched and tempered (+QT); tube; 5-16mm; flaw)

Strain life

Classification

30CrNiMo8 (quenched and tempered (+QT); wide flat; 0.000-8.000mm)

Yield strength

Tensile strength

Classification

30CrNiMo8 (quenched and tempered (+QT); wide flat; 100.000-160.000mm)

Yield strength

Tensile strength

Classification

30CrNiMo8 (quenched and tempered (+QT); wide flat; 20.000-40.000mm)

Yield strength

Tensile strength

Classification