S235JRC | 1.0122 Material Datasheet

Material Test Series Values

Material Standard Values

Material Models for Simulation

Unlock Exclusive Materials Data

Gain access to a wealth of materials data by joining our Materials Portal.

Material Description

Material Number	Material Number (single)	Standard	Range of Application	Standard Status	Country	Predecessor	Remark
1.0122 (DIN EN 10277 : 2018-09)	1.0122	DIN EN 10277 : 2018-09	Supersedes DIN EN 10277-2 : 2008-06	Valid	Germany	S235JRC	The unalloyed quality steel S235JRC is used as levelled and bright steel sheared to length in the drawn, peeled or grinded condition for general technical use.

Chemical Composition

C [%]	Cu [%]	Mn [%]	N [%]	P [%]	S [%]	Source
blur	blur	blur	blur	blur	blur	blur

Mechanical Properties

Semi-finished Product	Condition	Nominal Size [mm]	Temperature [°C]	Tensile Strength [MPa]	Yield Strength (0.2% offset) [MPa]	Elongation A [%]	Hardness HB \| HBW	Source
blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur

Physical Properties

Temperature [°C]	Density [g/cm³]	Young's Modulus [GPa]	Shear Modulus [GPa]	Mean Coefficient of Thermal Expansion (reference 20°C) [10^-6*K^-1]	Thermal Conductivity [W/(m*K)]	Specific Electrical Resistance [µΩm]	Mean Specific Heat Capacity [kJ/(kg*K)]	Source
blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur

Young's Modulus [GPa] vs Temperature [°C]

Exclusive Insight Locked!

This premium diagram is currently blurred. Gain full access to detailed insights and stay ahead with exclusive content.

Unlock Now

Mean Coefficient of Thermal Expansion (reference 20°C) [10^-6*K^-1] vs Temperature [°C]

Exclusive Insight Locked!

This premium diagram is currently blurred. Gain full access to detailed insights and stay ahead with exclusive content.

Unlock Now

Cross Reference

Material Name	Country	Standard	Source
Q235B	China		DIN EN 10277
S235JRC	Europe	EN 10277
S235JRG2C	Europe		Stahlschlüssel 2016, Verlag Stahlschlüssel Wegst GmbH, Marbach
S235B	International	ISO 683-18	DIN EN 10277
RQSt 37-2	Germany		Stahlschlüssel 2016, Verlag Stahlschlüssel Wegst GmbH, Marbach

Producer/Supplier/Trade names

Tradename	Supplier
S235JRC	HEINE + BEISSWENGER Stiftung + Co.KG, Fellbach
S235JRC	INTERSTAHL Service GmbH, Wetter
S235JRC	Klöckner Stahl- und Metallhandel GmbH, Bremen
S235JRC	pauly STAHLHANDEL, Essen
S235JRC	Salzgitter Mannesmann Stahlhandel GmbH, Düsseldorf
S235JRC	Swiss Steel International GmbH, Düsseldorf
S235JRC	ThyssenKrupp Schulte GmbH, Essen

Material Compliance

REACh	RoHS
blur	blur

FKM Guideline Fatigue Strength

Semi-finished Product	Condition	Nominal Size [mm]	Tensile Strength [MPa]	Yield Strength [MPa]	Fatigue Limit under rev. Tension-Compression Stresses [MPa]	Fatigue Strength under pulsating Tensile Stresses [MPa]	Bending Fatigue Strength [MPa]	Shear Fatigue Strength [MPa]	Torsion Fatigue Strength [MPa]	Source	Remark
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur

S235JRC (1.0122; DIN EN 10277 : 2018-09)

Linear-elastic

Temperature [°C]	Young's modulus [GPa]	Shear modulus [GPa]	Poisson's ratio
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur

Alternating stress

Temperature [°C]	Stress ratio	Alternating stress [MPa]	Cycles
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur

Yield strength

Temperature [°C]	0.2% Proof strength [MPa]
blur	blur

Electrical resistivity

Temperature [°C]	Specific electrical resistance [µΩm]
blur	blur

Coefficient thermal expansion

Related Temperature [°C]	Temperature [°C]	Coefficient thermal expansion [10^-6*K^-1]
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur

Specific heat

Temperature [°C]	Specific heat [kJ/(kg*K)]
blur	blur

Density

Temperature [°C]	Density [g/cm³]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Thermal conductivity

Temperature [°C]	Thermal conductivity [W/(m*K)]
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur

Classification

WIAM Material	Source description
blur	blur

Designation

Designation	Material number	Source
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur

S235JRC (normalized or normalized formed (+N); sheet; tension/compression; flaw)

Alternating stress

Temperature [°C]	Stress ratio	Alternating stress [MPa]	Cycles
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur

Classification

Treatment	Semi-finished product	Load type	Failure criteria	Source description
blur	blur	blur	blur	blur

S235JRC (normalized or normalized formed (+N); plate; 12.000mm; tension/compression; fracture)

Alternating stress

Temperature [°C]	Stress ratio	Alternating stress [MPa]	Cycles
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Load type	Failure criteria	Source description
blur	blur	blur	blur	blur	blur

S235JRC (normalized or normalized formed (+N); sheet; tension/compression; fracture)

Alternating stress

Temperature [°C]	Stress ratio	Alternating stress [MPa]	Cycles
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur

Classification

Treatment	Semi-finished product	Load type	Failure criteria	Source description
blur	blur	blur	blur	blur

S235JRC (tension/compression; fracture)

Alternating stress

Temperature [°C]	Stress ratio	Alternating stress [MPa]	Cycles
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur

Classification

Load type	Failure criteria	Source description
blur	blur	blur

S235JRC (normalized or normalized formed (+N); bar; 16mm; fracture)

Strain life

Temperature [°C]	Cyclic fatigue strength coefficient [MPa]	Cyclic fatigue strength exponent	Ductility coefficient [Pa]	Ductility exponent	Cyclic strength coefficient [MPa]	Cyclic strain hardening exponent	Young's modulus [GPa]
blur	blur	blur	blur	blur	blur	blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Failure criteria	Source description
blur	blur	blur	blur	blur

S235JRC (stress relieved; 6mm; fracture)

Strain life

Temperature [°C]	Cyclic fatigue strength coefficient [MPa]	Cyclic fatigue strength exponent	Ductility coefficient [Pa]	Ductility exponent	Cyclic strength coefficient [MPa]	Cyclic strain hardening exponent	Young's modulus [GPa]
blur	blur	blur	blur	blur	blur	blur	blur

Classification

Treatment	Dimension [mm]	Failure criteria	Source description
blur	blur	blur	blur

S235JRC (cold drawn; bright steel; 5.000-10.000mm)

Yield strength

Temperature [°C]	0.2% Proof strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

S235JRC (cold drawn; bright steel; 10.000-16.000mm)

Yield strength

Temperature [°C]	0.2% Proof strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

S235JRC (cold drawn; bright steel; 16.000-40.000mm)

Yield strength

Temperature [°C]	0.2% Proof strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

S235JRC (cold drawn; bright steel; 40.000-63.000mm)

Yield strength

Temperature [°C]	0.2% Proof strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

S235JRC (cold drawn; bright steel; 63.000-100.000mm)

Yield strength

Temperature [°C]	0.2% Proof strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

S235JRC (as rolled and turned (+SH); bright steel; 16.000-100.000mm)

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

S235JRC (as rolled (+AR); bar; 40.000mm)

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

S235JRC (normalized or normalized formed (+N); bar; 40.000mm)

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

S235JRC | 1.0122 Material Datasheet

Material Test Series Values

Material Standard Values

Material Models for Simulation

Material Description

Chemical Composition

Mechanical Properties

Physical Properties

Young's Modulus [GPa] vs Temperature [°C]

Mean Coefficient of Thermal Expansion (reference 20°C) [10^-6*K^-1] vs Temperature [°C]

Cross Reference

Producer/Supplier/Trade names

Material Compliance

FKM Guideline Fatigue Strength

S235JRC (1.0122; DIN EN 10277 : 2018-09)

Linear-elastic

Alternating stress

Yield strength

Electrical resistivity

Coefficient thermal expansion

Specific heat

Density

Tensile strength

Thermal conductivity

Classification

Designation

S235JRC (normalized or normalized formed (+N); sheet; tension/compression; flaw)

Alternating stress

Classification

S235JRC (normalized or normalized formed (+N); plate; 12.000mm; tension/compression; fracture)

Alternating stress

Classification

S235JRC (normalized or normalized formed (+N); sheet; tension/compression; fracture)

Alternating stress

Classification

S235JRC (tension/compression; fracture)

Alternating stress

Classification

S235JRC (normalized or normalized formed (+N); bar; 16mm; fracture)

Strain life

Classification

S235JRC (stress relieved; 6mm; fracture)

Strain life

Classification

S235JRC (cold drawn; bright steel; 5.000-10.000mm)

Yield strength

Tensile strength

Classification

S235JRC (cold drawn; bright steel; 10.000-16.000mm)

Yield strength

Tensile strength

Classification

S235JRC (cold drawn; bright steel; 16.000-40.000mm)

Yield strength

Tensile strength

Classification

S235JRC (cold drawn; bright steel; 40.000-63.000mm)

Yield strength

Tensile strength

Classification

S235JRC (cold drawn; bright steel; 63.000-100.000mm)

Yield strength

Tensile strength

Classification

S235JRC (as rolled and turned (+SH); bright steel; 16.000-100.000mm)

Tensile strength

Classification

S235JRC (as rolled (+AR); bar; 40.000mm)

Tensile strength

Classification

S235JRC (normalized or normalized formed (+N); bar; 40.000mm)

Tensile strength

Classification

Similar Materials