42 CrMoS 4 | 1.7227 Material Datasheet

Material Test Series Values

Material Standard Values

Material Models for Simulation

Unlock Exclusive Materials Data

Gain access to a wealth of materials data by joining our Materials Portal.

Material Description

Material Number	Material Number (single)	Standard	Range of Application	Standard Status	Country	Successor	Remark	Application temperature [°C]
1.7227 (DIN 17200 : 1987-03)	1.7227	DIN 17200 : 1987-03	DIN 17200 : 1987-03 replaced by DIN EN 10083-1/-2 : 1991-10	Replaced	Germany	42CrMoS4	Steel 42 CrMoS 4 is suitable for high loaded parts of high wear resistance and very favorable core qualities as well as enhanced workability in vehicle manufacturing, engine and machine engineering (e.g. crankshafts, pinions, balancer shafts). The steel has a high specific static and dynamic load resistance. Lowest application temp. -40 °C.	≥ -40

Chemical Composition

C [%]	Cr [%]	Mn [%]	Mo [%]	P [%]	S [%]	Si [%]	Source
blur	blur	blur	blur	blur	blur	blur	blur

Mechanical Properties

Semi-finished Product	Condition	Nominal Size [mm]	Temperature [°C]	Specimen Direction	Tensile Strength [MPa]	Yield Strength [MPa]	Elongation A [%]	Reduction of Area [%]	Hardness HB \| HBW	Source	Remark
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur

Physical Properties

Temperature [°C]	Density [g/cm³]	Young's Modulus [GPa]	Shear Modulus [GPa]	Poisson's Ratio	Mean Coefficient of Thermal Expansion (reference 20°C) [10^-6*K^-1]	Thermal Conductivity [W/(m*K)]	Specific Electrical Resistance [µΩm]	Mean Specific Heat Capacity [kJ/(kg*K)]	Source	Remark
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur

Young's Modulus [GPa] vs Temperature [°C]

Exclusive Insight Locked!

This premium diagram is currently blurred. Gain full access to detailed insights and stay ahead with exclusive content.

Unlock Now

Mean Coefficient of Thermal Expansion (reference 20°C) [10^-6*K^-1] vs Temperature [°C]

Exclusive Insight Locked!

This premium diagram is currently blurred. Gain full access to detailed insights and stay ahead with exclusive content.

Unlock Now

Toughness Data (Impact)

Condition	Nominal Size [mm]	Temperature [°C]	Specimen Shape	Specimen Direction	Notch Impact Energy [J]	Source
blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur

Heat Treatment

Heat Treatment	Step	Temperature [°C]	Medium	Source	Remark
blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur

Cross Reference

Material Name	Country	Standard
42 CD 4 u	France	NF A 35-552
708 M 40	Great Britain	BS 970/1
42 CrMoS 4	International	ISO 683/1-87
42 CrMo 4	Italy	UNI 7845
2244	Sweden	MNC 852 E
40 CrM 4-1	Spain	UNE 36-012
42CrMoS4	Germany	DIN EN 10083-1

Producer/Supplier/Trade names

Tradename	Supplier
(1.7227)	voestalpine BÖHLER Edelstahl GmbH & Co.KG, Kapfenberg
42 CrMo 4 S	Hayes-Lemmerz-Werke GmbH, Königswinter
42 CrMoS 4	AG der Dillinger Hüttenwerke, Dillingen
42 CrMoS 4	ArcelorMittal Commercial Germany, Cologne
42 CrMoS 4	Hoesch Hohenlimburg GmbH, Hagen
42 CrMoS 4	Salzgitter Flachstahl GmbH, Salzgitter
42 CrMoS 4	ThyssenKrupp Steel Europe AG, Duisburg
42 CrMoS 4	voestalpine AG, Linz
42 CrMoS 4	Saarstahl AG, Völklingen
42 CrMoS 4	Georgsmarienhütte GmbH, Georgsmarienhütte
42 CrMoS 4	Hayes-Lemmerz-Werke GmbH, Königswinter
42 CrMoS 4	Swiss Steel International GmbH, Düsseldorf
42 CrMoS 4	Dörrenberg Edelstahl GmbH, Engelskirchen
42 CrMoS 4	Walzwerke Einsal GmbH, Nachrodt
42 CrMoS 4	Willy Haecker GmbH, Hückeswagen
42 CrMoS 4	Hagenkötter GmbH & Co., Solingen
42 CrMoS 4	Chr. Höver & Sohn GmbH & Co KG, Lindlar
42 CrMoS 4	Platestahl Umformtechnik GmbH, Lüdenscheid
42 CrMoS 4	Hermann Stahlschmidt Stahlgesellschaft m. b. H., Willich
42 CrMoS 4	Stahlwerk Unna GmbH & Co.KG, Unna
42 CrMoS 4	ZAPP AG, Ratingen
42 CrMoS 4	Haage Anagramm Technologien GmbH, Mülheim a. d. Ruhr
42 CrMoS 4	Bochumer Verein Verkehrstechnik GmbH, Bochum
42 CrMoS 4	C.D. Wälzholz GmbH & Co. KG, Hagen
42 CrMoS 4	Böllinghaus Steel GmbH, Hilden
42 CrMoS 4	ZOLLERN GmbH & Co. KG, Sigmaringen
42 CrMoS 4	COGNE Edelstahl GmbH, Neuss
42 CrMoS 4	BESSEY Tool GmbH & Co. KG, Bietigheim-Bissingen
42 CrMoS 4	Vallourec Deutschland GmbH, Düsseldorf
42 CrMoS 4	ROPA STAHLVERTRIEB GMBH, Bad Bergzabern
42 CrMoS 4	Vallourec Deutschland GmbH, Mülheim
42 CrMoS 4	Vallourec Deutschland GmbH, Düsseldorf
42 CrMoS 4	Stahlwerk Bous GmbH, Bous
Almenit 7227	Almenit, Mittelberg
BGH 7227	BGH Edelstahl Siegen GmbH
Buderus 42 CrMoS 4	Buderus Edelstahl GmbH, Wetzlar
DIRO-42 CrMoS 4	DIROSTAHL, Remscheid
Klöckner 42 CrMoS 4	Klöckner & Co SE, Duisburg
TEW 42 CrMoS 4	Deutsche Edelstahlwerke Specialty Steel GmbH & Co. KG, Witten
TS 42 CrMoS 4	ThyssenKrupp Schulte GmbH, Essen

Material Compliance

REACh	RoHS
blur	blur

FKM Guideline Fatigue Strength

Semi-finished Product	Condition	Nominal Size [mm]	Tensile Strength [MPa]	Yield Strength [MPa]	Fatigue Limit under rev. Tension-Compression Stresses [MPa]	Fatigue Strength under pulsating Tensile Stresses [MPa]	Bending Fatigue Strength [MPa]	Shear Fatigue Strength [MPa]	Torsion Fatigue Strength [MPa]	Source	Remark
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur

Hardenability (Jominy test)

Condition	Front Distance [mm]	Hardness HRC	Source	Remark
blur	blur	blur	blur	blur
blur	blur	blur	blur	blur
blur	blur	blur	blur	blur
blur	blur	blur	blur	blur
blur	blur	blur	blur	blur
blur	blur	blur	blur	blur
blur	blur	blur	blur	blur
blur	blur	blur	blur	blur
blur	blur	blur	blur	blur
blur	blur	blur	blur	blur
blur	blur	blur	blur	blur
blur	blur	blur	blur	blur
blur	blur	blur	blur	blur
blur	blur	blur	blur	blur
blur	blur	blur	blur	blur

42 CrMoS 4 (1.7227; DIN 17200 : 1987-03)

Linear-elastic

Temperature [°C]	Young's modulus [GPa]	Shear modulus [GPa]	Poisson's ratio
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur

Alternating stress

Temperature [°C]	Stress ratio	Alternating stress [MPa]	Cycles
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur

Yield strength

Temperature [°C]	Yield strength [MPa]
blur	blur

Electrical resistivity

Temperature [°C]	Specific electrical resistance [µΩm]
blur	blur

Coefficient thermal expansion

Related Temperature [°C]	Temperature [°C]	Coefficient thermal expansion [10^-6*K^-1]
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur

Specific heat

Temperature [°C]	Specific heat [kJ/(kg*K)]
blur	blur

Density

Temperature [°C]	Density [g/cm³]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Thermal conductivity

Temperature [°C]	Thermal conductivity [W/(m*K)]
blur	blur

Classification

WIAM Material	Source description
blur	blur

Designation

Designation	Material number	Source
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur

42 CrMoS 4 (quenched and tempered (+QT); forging; 0.000-16.000mm)

Yield strength

Temperature [°C]	Yield strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

42 CrMoS 4 (quenched and tempered (+QT); forging; 16.000-40.000mm)

Yield strength

Temperature [°C]	Yield strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

42 CrMoS 4 (quenched and tempered (+QT); forging; 40.000-100.000mm)

Yield strength

Temperature [°C]	Yield strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

42 CrMoS 4 (quenched and tempered (+QT); forging; 100.000-160.000mm)

Yield strength

Temperature [°C]	Yield strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

42 CrMoS 4 (quenched and tempered (+QT); forging; 160.000-250.000mm)

Yield strength

Temperature [°C]	Yield strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

42 CrMoS 4 (quenched and tempered (+QT); bar; 16.000mm)

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur

Classification

Treatment	Semi-finished product	Dimension [mm]	Source description
blur	blur	blur	blur

42 CrMoS 4 | 1.7227 Material Datasheet

Material Test Series Values

Material Standard Values

Material Models for Simulation

Material Description

Chemical Composition

Mechanical Properties

Physical Properties

Young's Modulus [GPa] vs Temperature [°C]

Mean Coefficient of Thermal Expansion (reference 20°C) [10^-6*K^-1] vs Temperature [°C]

Toughness Data (Impact)

Heat Treatment

Cross Reference

Producer/Supplier/Trade names

Material Compliance

FKM Guideline Fatigue Strength

Hardenability (Jominy test)

42 CrMoS 4 (1.7227; DIN 17200 : 1987-03)

Linear-elastic

Alternating stress

Yield strength

Electrical resistivity

Coefficient thermal expansion

Specific heat

Density

Tensile strength

Thermal conductivity

Classification

Designation

42 CrMoS 4 (quenched and tempered (+QT); forging; 0.000-16.000mm)

Yield strength

Tensile strength

Classification

42 CrMoS 4 (quenched and tempered (+QT); forging; 16.000-40.000mm)

Yield strength

Tensile strength

Classification

42 CrMoS 4 (quenched and tempered (+QT); forging; 40.000-100.000mm)

Yield strength

Tensile strength

Classification

42 CrMoS 4 (quenched and tempered (+QT); forging; 100.000-160.000mm)

Yield strength

Tensile strength

Classification

42 CrMoS 4 (quenched and tempered (+QT); forging; 160.000-250.000mm)

Yield strength

Tensile strength

Classification

42 CrMoS 4 (quenched and tempered (+QT); bar; 16.000mm)

Tensile strength

Classification

Similar Materials