Materials Portal Logo MATERIALS PORTAL

X5CrNiMo17-12-2 | 1.4401 Material Datasheet

Unlock Exclusive Materials Data

Gain access to a wealth of materials data by joining our Materials Portal.

Register for Free or Upgrade for Full Access

Material Description

Material Number Material Number (single) Standard Range of Application Standard Status Country Successor Application temperature [°C]
1.4401 (DIN EN 10028-7 : 2000-06) 1.4401 DIN EN 10028-7 : 2000-06 DIN EN 10028-7 : 2000-06 replaced by DIN EN 10028-7 : 2008-02 Replaced Germany X5CrNiMo17-12-2 ≤ 300 1)
1) Remark: The material X5CrNiMo17-12-2 is comparable to X 5 CrNiMo 17-12-2 acc. to DIN17440-85. The material is an austenitic CrNiMo-steel of increased resistance to unoxidizing acids and halogenated media, to intercrystalline corrosion in delivery condition. It is usable for mirror-polishing and well cold formable. Application for acid resistant instruments of chemical and pharmaceutical industry, cellulose, rubber, fatty acid, textile and rayon industry, petrochemical engineering, for parts of medical and photograpic supply, in sewage plants, for higher chloride-contents.Applicable in pressure vessel construction up to 300 °C, otherwise subject to authorization. In construction trade used for construction elements of highest corrosion demands (e.g. masonry anchorage coupler, smokestacks, sanitary engineering, exterior facades, elevators). The Mo-alloyed stainless steel is approved for construction elements of carrying function (extended approval certificate Nr. Z-30.44.1 of Institut für Bautechnik Berlin, dated 1. Februar 1994, containing demands for materials, calculation and construction control). Strength grades E 225, E 355 are common.

Chemical Composition

C [%] Cr [%] Mn [%] Mo [%] N [%] Ni [%] P [%] S [%] Si [%]
blur blur blur blur blur blur blur blur blur 1)
1) Source: blur

Mechanical Properties

Semi-finished Product Condition Nominal Size [mm] Temperature [°C] Specimen Direction Tensile Strength [MPa] Yield Strength (0.2% offset) [MPa] Yield Strength (1.0% offset) [MPa] Elongation A [%] Elongation A80 [%]
blur blur blur blur blur blur blur blur blur blur 1)2)
blur blur blur blur blur blur blur blur blur blur 1)3)
blur blur blur blur blur blur blur blur blur blur 1)4)
blur blur blur blur blur blur blur blur blur blur 1)
blur blur blur blur blur blur blur blur blur blur 1)
blur blur blur blur blur blur blur blur blur blur 1)
1) Source: blur
2) Remark: blur
3) Remark: blur
4) Remark: blur

Toughness Data (Impact)

Semi-finished Product Condition Nominal Size [mm] Temperature [°C] Specimen Shape Specimen Direction Notch Impact Energy [J]
blur blur blur blur blur blur blur 1)2)
blur blur blur blur blur blur blur 1)2)
blur blur blur blur blur blur blur 1)2)
blur blur blur blur blur blur blur 1)2)
blur blur blur blur blur blur blur 1)2)
blur blur blur blur blur blur blur 1)2)
1) Source: blur
2) Remark: blur

Heat Treatment

Heat Treatment Temperature [°C]
blur blur 1)
blur blur 1)
1) Source: blur

Cross Reference

Material Name Country Standard
316 Australia AS 1449
0Cr17Ni12Mo2 China GB 1220-84
17346 Czech Republik/Slovakia CSN 417346
X5CrNiMo17-12-2 Europe EN 10028-7
Z 6 CND 17-11 France NF A 35-574
316 S 31 Great Britain BS 970
03Ch17N14M3 Russia GOST 5632
20 International ISO 683/13-86
X 5 CrNiMo 17 12 Italy UNI 6901
SUS 316 Japan JIS G 4303
X 5 CrNiMo 17 12 2 S Austria M 3120
2347 Sweden MNC 900 E
F.3534-X 5 CrNiMo 17 12 2 Spain UNE 36-016
S31600 USA UNS
316 USA ASTM A 240
X 5 CrNiMo 17 12 2 Germany DIN 17440

Producer/Supplier/Trade names

Tradename Supplier
1.4401 Saarstahl AG, Völklingen
1.4401 Walzwerke Einsal GmbH, Nachrodt
1.4401 Klaus Kuhn Edelstahlgießerei GmbH, Radevormwald
1.4401 ZAPP AG, Ratingen
1.4401 Rolf Kind GmbH, Gummersbach
1.4401 WDI - Westfälische Drahtindustrie GmbH, Hamm
1.4401 Sprint Metal Edelstahlziehereien GmbH, Hemer
1.4401 NIRONIT Edelstahlhandel GmbH, Rosengarten
1.4401 H. Kleineberg GmbH, Stelle
1.4401 ROPA STAHLVERTRIEB GMBH, Bad Bergzabern
1.4401 INOX SERVICE CENTER GmbH, Krefeld
1.4401 Voß Edelstahlhandel GmbH & Co.KG, Neu Wulmstorf
1.4401 STAPPERT Deutschland GmbH, Düsseldorf
1.4401 INTERSTAHL Service GmbH, Wetter
1.4401 Andernach & Bleck GmbH & Co. KG, Hagen
1.4401 Rosswag GmbH, Pfinztal-Kleinsteinbach
316 ThyssenKrupp Stainless International GmbH, Krefeld
4401 Swiss Steel International GmbH, Düsseldorf
4401 Edelstahlservice GmbH, Frankfurt/M.
4401 BESSEY Tool GmbH & Co. KG, Bietigheim-Bissingen
4401 Binder Edelstahl Produktionsgesellschaft mbH, Bremen
4401 BWS, Iserlohn-Letmathe, Servicecenter/Verwaltung, Iserlohn
4401 K. D. Feddersen & Co. Ueberseegesellschaft mbH, Hamburg
4401.0 BÖHLER A 120 voestalpine High Perfomance Metals Deutschland GmbH, Düsseldorf
A120 Schoeller-Bleckmann Edelstahlrohr GmbH, Ternitz
Almenit 4401 Almenit, Mittelberg
almet 1.4401 ALMET AG, Remshalden
ALZ 316 ALZ-Naamloze Vennootschap, Industrieterrein, Genk
ARGESTE 4401 Stahlwerk Ergste Westig GmbH, Schwerte
AVESTA-SHEFFIELD 17-11-2 Outokumpu GmbH, Willich
BEKINOX 316 Bekaert GmbH, Friedrichsdorf
BGH 4401 BGH Edelstahl Siegen GmbH
BÖHLER A120 voestalpine BÖHLER Edelstahl GmbH & Co.KG, Kapfenberg
CHRONIMO 1.4401 Chronimo Edelstahl GmbH, Barsbüttel
CLI 17-12-2 Industeel Deutschland GmbH, Grevenbroich
Cogne 316 COGNE Edelstahl GmbH, Neuss
Coracid 4401 Chr. Höver & Sohn GmbH & Co. KG, Lindlar
Corronon 184 S Aubert&Duval Special Steel GmbH, Mönchengladbach
DN-4401 ST Deutsche Nickel GmbH, Schwerte
DOMINIAL RAS 400 Kind & Co., Edelstahlwerk, Wiehl
Edel 1.4401 ET Edelstahl-Trading GmbH, Willich
Eschmann 4401 EschmannStahl GmbH, Reichshof-Wehnrath
Hacodur RS 401 Hagenkötter GmbH & Co., Solingen
HAFESTA B 4 W Hagener Feinstahl GmbH, Hagen
Inox 1.4401 INOX-Stahlgesellschaft mbH, Nürtingen
INOX 4401-316 TPS-Technitube Röhrenwerke GmbH, Daun
IS 4401 Intersteel Stahlhandel GmbH, Düsseldorf
KF 480 Willy Haecker GmbH, Hückeswagen
Klöckner 1.4401 Klöckner & Co SE, Duisburg
Koro 4401 Koring + Rottsieper Edelstahl GmbH + Co.KG, Remscheid
Märker Irrubigo 4401 Schmidt + Clemens GmbH + Co. KG, Edelstahlwerk Kaiserau, Lindlar
NIROCUT 4401 Deutsche Edelstahlwerke Specialty Steel GmbH & Co. KG, Witten
NIROSTA 4401 Outokumpu Nirosta GmbH, Krefeld
PAO 188/2 W Platestahl Umformtechnik GmbH, Lüdenscheid
POLARIT 755 Outokumpu Deutschland GmbH, Düsseldorf
REMANIT 4401 Deutsche Edelstahlwerke Specialty Steel GmbH & Co. KG, Witten
Rodresist 1.4401 ATI Flat Rolled Products GmbH, Remscheid
RP 4 S Gustav Grimm Edelstahlwerk GmbH & Co. KG, Remscheid
RS 21 Chr. Höver & Sohn GmbH & Co KG, Lindlar
SANDVIK 3R65 SANDVIK Materials TEchnology Deutschland GmbH, Düsseldorf
SANDVIK 4LR60 SANDVIK Materials TEchnology Deutschland GmbH, Düsseldorf
SANDVIK 4RL61 SANDVIK Materials TEchnology Deutschland GmbH, Düsseldorf
SANDVIK 6LR62 SANDVIK Materials TEchnology Deutschland GmbH, Düsseldorf
SANDVIK SANMAC 316 SANDVIK Materials TEchnology Deutschland GmbH, Düsseldorf
SANDVIK SANMAC 316L SANDVIK Materials TEchnology Deutschland GmbH, Düsseldorf
SB 5 Edelstahlwerk W. Ossenberg & Cie. GmbH, Altena
SBW Dörrenberg Edelstahl GmbH, Engelskirchen
SINOX SSH 1 Schoellerwerk GmbH & Co. KG, Hellenthal/Eifel
THENOX 4401 C.D. Wälzholz GmbH & Co. KG, Hagen
TS 4401 ThyssenKrupp Schulte GmbH, Essen
UGIMA 4401 Aperam Stainless Europe, Paris
UGIMA 4401 FG Aperam Stainless Europe, Paris
UGINE 4401 Aperam Stainless Europe, Paris
UGINE 4401 FG Aperam Stainless Europe, Paris
UGINOX 17-10 M Aperam Stainless Europe, Paris
VLX 316 Vallourec Deutschland GmbH, Düsseldorf
Westig 4401 ZAPP AG, Ratingen
X 18 M AUBERT & DUVAL Deutschland GmbH, München
X5CrNiMo17-12-2 Hoesch Hohenlimburg GmbH, Hagen
X5CrNiMo17-12-2 Salzgitter Flachstahl GmbH, Salzgitter
X5CrNiMo17-12-2 Hermann Stahlschmidt Stahlgesellschaft m. b. H., Willich
X5CrNiMo17-12-2 Haage Anagramm Technologien GmbH, Mülheim a. d. Ruhr
X5CrNiMo17-12-2 Böllinghaus Steel GmbH, Hilden
X5CrNiMo17-12-2 Schmiedewerke Gröditz GmbH, Gröditz
X5CrNiMo17-12-2 M. Woite GmbH, Erkrath
X5CrNiMo17-12-2 HEINE + BEISSWENGER Stiftung + Co.KG, Fellbach
X5CrNiMo17-12-2 Tata Steel, IJmuiden
X5CrNiMo17-12-2 EZM Edelstahlzieherei Mark GmbH, Wetter

Material Compliance

REACh RoHS
blur blur

Linear-elastic

Temperature [°C] Young's modulus [GPa] Bulk modulus [GPa] Shear modulus [GPa] Poisson's ratio
blur blur blur blur blur
blur blur blur blur blur
blur blur blur blur blur
blur blur blur blur blur
blur blur blur blur blur
blur blur blur blur blur
blur blur blur blur blur
blur blur blur blur blur

Alternating stress

Temperature [°C] Stress ratio Mean stress [MPa] Alternating stress [MPa] Cycles
blur blur blur blur blur
blur blur blur blur blur
blur blur blur blur blur
blur blur blur blur blur

Yield strength

Temperature [°C] 0.1% Proof strength [MPa] 0.2% Proof strength [MPa] Yield strength [MPa]
blur blur blur blur

Tensile strength

Temperature [°C] Tensile strength [MPa]
blur blur

Classification

WIAM Material Treatment Semi-finished product Dimension [mm] Load type Failure criteria Rolling direction Maximum stress [MPa] Strain at maximum stress [%] Source description
blur blur blur blur blur blur blur blur blur blur

Designation

Designation Material number Source
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur
blur blur blur

Strain life

Temperature [°C] Static hardening coefficient [MPa] Static hardening exponent Cyclic fatigue strength coefficient [MPa] Cyclic fatigue strength exponent Ductility coefficient [Pa] Ductility exponent Cyclic strength coefficient [MPa] Cyclic strain hardening exponent Young's modulus [GPa]
blur blur blur blur blur blur blur blur blur blur
blur blur blur blur blur blur blur blur blur blur
blur blur blur blur blur blur blur blur blur blur
blur blur blur blur blur blur blur blur blur blur
blur blur blur blur blur blur blur blur blur blur

Classification

WIAM Material Treatment Semi-finished product Dimension [mm] Load type Failure criteria Rolling direction Maximum stress [MPa] Strain at maximum stress [%] Source description
blur blur blur blur blur blur blur blur blur blur

Strain life

Temperature [°C] Static hardening coefficient [MPa] Static hardening exponent Cyclic fatigue strength coefficient [MPa] Cyclic fatigue strength exponent Ductility coefficient [Pa] Ductility exponent Cyclic strength coefficient [MPa] Cyclic strain hardening exponent Young's modulus [GPa]
blur blur blur blur blur blur blur blur blur blur
blur blur blur blur blur blur blur blur blur blur
blur blur blur blur blur blur blur blur blur blur
blur blur blur blur blur blur blur blur blur blur

Classification

WIAM Material Treatment Semi-finished product Dimension [mm] Load type Failure criteria Rolling direction Maximum stress [MPa] Strain at maximum stress [%] Source description
blur blur blur blur blur blur blur blur blur blur

Strain life

Temperature [°C] Static hardening coefficient [MPa] Static hardening exponent Cyclic fatigue strength coefficient [MPa] Cyclic fatigue strength exponent Ductility coefficient [Pa] Ductility exponent Cyclic strength coefficient [MPa] Cyclic strain hardening exponent Young's modulus [GPa]
blur blur blur blur blur blur blur blur blur blur
blur blur blur blur blur blur blur blur blur blur
blur blur blur blur blur blur blur blur blur blur
blur blur blur blur blur blur blur blur blur blur
blur blur blur blur blur blur blur blur blur blur

Classification

WIAM Material Treatment Semi-finished product Dimension [mm] Load type Failure criteria Rolling direction Maximum stress [MPa] Strain at maximum stress [%] Source description
blur blur blur blur blur blur blur blur blur blur

Yield strength

Temperature [°C] 0.1% Proof strength [MPa] 0.2% Proof strength [MPa] Yield strength [MPa]
blur blur blur blur

Tensile strength

Temperature [°C] Tensile strength [MPa]
blur blur

Classification

WIAM Material Treatment Semi-finished product Dimension [mm] Load type Failure criteria Rolling direction Maximum stress [MPa] Strain at maximum stress [%] Source description
blur blur blur blur blur blur blur blur blur blur

Strain life

Temperature [°C] Static hardening coefficient [MPa] Static hardening exponent Cyclic fatigue strength coefficient [MPa] Cyclic fatigue strength exponent Ductility coefficient [Pa] Ductility exponent Cyclic strength coefficient [MPa] Cyclic strain hardening exponent Young's modulus [GPa]
blur blur blur blur blur blur blur blur blur blur

Classification

WIAM Material Treatment Semi-finished product Dimension [mm] Load type Failure criteria Rolling direction Maximum stress [MPa] Strain at maximum stress [%] Source description
blur blur blur blur blur blur blur blur blur blur

Yield strength

Temperature [°C] 0.1% Proof strength [MPa] 0.2% Proof strength [MPa] Yield strength [MPa]
blur blur blur blur

Tensile strength

Temperature [°C] Tensile strength [MPa]
blur blur

Classification

WIAM Material Treatment Semi-finished product Dimension [mm] Load type Failure criteria Rolling direction Maximum stress [MPa] Strain at maximum stress [%] Source description
blur blur blur blur blur blur blur blur blur blur

Yield strength

Temperature [°C] 0.1% Proof strength [MPa] 0.2% Proof strength [MPa] Yield strength [MPa]
blur blur blur blur

Tensile strength

Temperature [°C] Tensile strength [MPa]
blur blur

Classification

WIAM Material Treatment Semi-finished product Dimension [mm] Load type Failure criteria Rolling direction Maximum stress [MPa] Strain at maximum stress [%] Source description
blur blur blur blur blur blur blur blur blur blur