X5CrNi18-10 | 1.4301 Material Datasheet
Unlock Exclusive Materials Data
Gain access to a wealth of materials data by joining our Materials Portal.
Register for Free or Upgrade for Full AccessMaterial Description
| Material Number | Material Number (single) | Standard | Scope | Standard Status | Country | Predecessor | Successor | Application temperature [°C] | VDA 231-106 classification | |
|---|---|---|---|---|---|---|---|---|---|---|
| 1.4301 (DIN EN 10088-1 : 1995-08) | 1.4301 | DIN EN 10088-1 : 1995-08 | DIN EN 10088-1 : 1995-08 replaced by DIN EN 10088-1 : 2005-09 | Replaced | Germany | X 5 CrNi 18 10 | X5CrNi18-10 | -200 - 550 | 1.1 | 1) |
| 1) Remark: X5CrNi18-10 as a standard type of the CrNi-steels is comparable to X 5 CrNi 18 10 acc. to DIN 17440 : 1985-07. It shows high corrosion resistance but no resistance to intercrystalline corrosion in sensitized condition. It is resistant in delivery condition. The steel is well processable, suitable for mirror finishing and very good cold-workable. Application for welded parts in chemical apparatus engineering, food and milk industry, for household appliances, in breweries, in architecture and vehicle engineering as well as for pumps, compressors, fittings. Application in water and slightly contaminated sewages. Application temperature: -200 to 550 °C (for the comparable DIN-material). X5CrNi18-10 is used in construction trade for decorations in exterior and interior architecture, e.g. roof and wall elements, facings, washing facilities, washbasins, for doors and windows. This material is permitted for load-bearing components. This material may be used as heat resistant steel acc. to DIN EN 10095 : 1999-05. |
Chemical Composition
| C [%] | Cr [%] | Mn [%] | N [%] | Ni [%] | P [%] | S [%] | Si [%] | |
|---|---|---|---|---|---|---|---|---|
| blur | blur | blur | blur | blur | blur | blur | blur | 1)2) |
| 1) Source: blur | ||||||||
| 2) Remark: blur |
Mechanical Properties
| Semi-finished Product | Condition | Nominal Size [mm] | Temperature [°C] | Specimen Direction | Tensile Strength [MPa] | Yield Strength (0.2% offset) [MPa] | Yield Strength (1.0% offset) [MPa] | Elongation A [%] | Elongation A80 [%] | Hardness HB | HBW | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | 1)2) |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | 1)3) |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | 1)2) |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | 1)3) |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | 1)4) |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | 1)5) |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | 1)2) |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | 1)3) |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | 1)2) |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | 1)3) |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | 1)4) |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | 1)5) |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | 1)6) |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | 1)7) |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | 1)8) |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | 1)9) |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | 1)10) |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | 11)12) |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | 11)12) |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | 11)13) |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | 11)14) |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | 1) |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | 1) |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | 1) |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | 1) |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | 1) |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | 1) |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | 1) |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | 1) |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | 1) |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | 1) |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | 11) |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | 11) |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | 11) |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | 11) |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | 11) |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | 11) |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | 11) |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | 11) |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | 11) |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | blur | 11) |
| 1) Source: blur | |||||||||||
| 2) Remark: blur | |||||||||||
| 3) Remark: blur | |||||||||||
| 4) Remark: blur | |||||||||||
| 5) Remark: blur | |||||||||||
| 6) Remark: blur | |||||||||||
| 7) Remark: blur | |||||||||||
| 8) Remark: blur | |||||||||||
| 9) Remark: blur | |||||||||||
| 10) Remark: blur | |||||||||||
| 11) Source: blur | |||||||||||
| 12) Remark: blur | |||||||||||
| 13) Remark: blur | |||||||||||
| 14) Remark: blur |
Physical Properties
| Temperature [°C] | Density [g/cm³] | Young's Modulus [GPa] | Mean Coefficient of Thermal Expansion (reference 20°C) [10^-6*K^-1] | Thermal Conductivity [W/(m*K)] | Specific Electrical Resistance [µΩm] | Mean Specific Heat Capacity [kJ/(kg*K)] | Magnetizeability | |
|---|---|---|---|---|---|---|---|---|
| blur | blur | blur | blur | blur | blur | blur | blur | 1)2) |
| blur | blur | blur | blur | blur | blur | blur | blur | 1)3) |
| blur | blur | blur | blur | blur | blur | blur | blur | 1)3) |
| blur | blur | blur | blur | blur | blur | blur | blur | 1)3) |
| blur | blur | blur | blur | blur | blur | blur | blur | 1)3) |
| blur | blur | blur | blur | blur | blur | blur | blur | 1)3) |
| 1) Source: blur | ||||||||
| 2) Remark: blur | ||||||||
| 3) Remark: blur |
Toughness Data (Impact)
| Semi-finished Product | Condition | Nominal Size [mm] | Temperature [°C] | Specimen Shape | Specimen Direction | Notch Impact Energy [J] | |
|---|---|---|---|---|---|---|---|
| blur | blur | blur | blur | blur | blur | blur | 1)2) |
| blur | blur | blur | blur | blur | blur | blur | 1)2) |
| blur | blur | blur | blur | blur | blur | blur | 1)2) |
| blur | blur | blur | blur | blur | blur | blur | 1)2) |
| blur | blur | blur | blur | blur | blur | blur | 3)4) |
| blur | blur | blur | blur | blur | blur | blur | 3) |
| 1) Source: blur | |||||||
| 2) Remark: blur | |||||||
| 3) Source: blur | |||||||
| 4) Remark: blur |
Heat Treatment
| Semi-finished Product | Heat Treatment | Temperature [°C] | Medium | |
|---|---|---|---|---|
| blur | blur | blur | blur | 1) |
| blur | blur | blur | blur | 2)3) |
| blur | blur | blur | blur | 1)3) |
| 1) Source: blur | ||||
| 2) Source: blur | ||||
| 3) Remark: blur |
Cross Reference
| Material Name | Country | Standard |
|---|---|---|
| 304 | USA | AISI |
| 304 | Australia | AS 1449 |
| 0Ch18N10 | Bulgaria | BDS 6738 |
| 0Cr18Ni9 | China | GB T 1220 |
| 0Cr18Ni9 | China | GB T 1221 |
| 0Cr18Ni9 | China | GB T 12271 |
| 0Cr18Ni9 | China | GB T 12770 |
| 0Cr18Ni9 | China | GB T 13296 |
| 0Cr18Ni9 | China | GB T 14975 |
| 0Cr18Ni9 | China | GB T 14976 |
| 0Cr18Ni9 | China | GB T 18705 |
| 0Cr18Ni9 | China | GB T 3090 |
| 0Cr18Ni9 | China | GB T 3280 |
| 0Cr18Ni9 | China | GB T 4232 |
| 0Cr18Ni9 | China | GB T 4237 |
| 0Cr18Ni9 | China | GB T 4238 |
| 0Cr18Ni9 | China | GB T 4239 |
| 0Cr18Ni9 | China | GB T 4240 |
| 0Cr18Ni9 | China | GB T 4356 |
| 17240 | Czech Republik/Slovakia | CSN 417240 |
| 725 | Finland | SFS 700 |
| X 4 CrNi 18 9 | Finland | SFS 700 |
| Z 6 CN 18-09 | France | NF A 35-574 |
| 304 S 15 | Great Britain | BS 1449-2 |
| 304 S 16 | Great Britain | BS 1449-2 |
| 304 S 31 | Great Britain | BS 1449-2 |
| 304 S 31 | Great Britain | BS 1501-3 |
| 304 S 31 | Great Britain | BS 1502 |
| 304 S 31 | Great Britain | BS 1503 |
| 304 S 31 | Great Britain | BS 1506 |
| 304 S 15 | Great Britain | BS 1554 |
| 304 S 31 | Great Britain | BS 1554 |
| 304 S 15 | Great Britain | BS 970-1 |
| 304 S 31 | Great Britain | BS 970-1 |
| 08Ch18N10 | Russia | GOST 5632 |
| ISC S 30408 | China | ISC |
| X5CrNi18-9 | International | ISO 16143-1 |
| X5CrNi18-9 | International | ISO 16143-2 |
| X5CrNi18-9 | International | ISO 16143-3 |
| X5CrNi18-9E | International | ISO 4954 |
| X5CrNi18-9 | International | ISO 6931-2 |
| M | International | ISO 7153-1 |
| X5CrNi18-9 | International | ISO 9328-7 |
| X5CrNi18-9 | International | ISO 9329-4 |
| X5CrNi18-9 | International | ISO 9330-6 |
| X5CrNi18-9 | International | ISO TS 15510 |
| X 5 CrNi 18 10 | Italy | UNI 6901 |
| SUS F 304 | Japan | JIS G 3214 |
| SUS 304TKA | Japan | JIS G 3446 |
| SUS 304TKC | Japan | JIS G 3446 |
| SUS 304TBS | Japan | JIS G 3447 |
| SUS 304 | Japan | JIS G 3448 |
| SUS 304TP | Japan | JIS G 3459 |
| SUS 304TB | Japan | JIS G 3463 |
| SUS 304 | Japan | JIS G 3468 |
| SUS 304 | Japan | JIS G 4303 |
| SUS 304 | Japan | JIS G 4304 |
| SUS 304 | Japan | JIS G 4305 |
| SUS 304 | Japan | JIS G 4308 |
| SUS 304 | Japan | JIS G 4309 |
| SUS 304-CPS | Japan | JIS G 4313 |
| SUS 304 | Japan | JIS G 4314 |
| SUS 304 | Japan | JIS G 4315 |
| SUS 304 | Japan | JIS G 4317 |
| SUS 304 | Japan | JIS G 4318 |
| SUS 304FB | Japan | JIS G 4319 |
| SUS 304A | Japan | JIS G 4321 |
| 14350 | Norway | NS 14001 |
| X 5 CrNi 18 10 S | Austria | ÖNORM M 3120 |
| OH18N9 | Poland | PN 86020 |
| STS 304 | South Korea | KS D 3534 |
| STS 304 | South Korea | KS D 3535 |
| STS 304TKA | South Korea | KS D 3536 |
| STS 304TKC | South Korea | KS D 3536 |
| STS 304TP | South Korea | KS D 3576 |
| STS 304TB | South Korea | KS D 3577 |
| STS 304 | South Korea | KS D 3692 |
| STS 304 | South Korea | KS D 3697 |
| STS 304 | South Korea | KS D 3698 |
| STS 304 | South Korea | KS D 3702 |
| STS 304 | South Korea | KS D 3703 |
| STS 304 | South Korea | KS D 3705 |
| STS 304 | South Korea | KS D 3706 |
| STS F 304 | South Korea | KS D 4115 |
| 5NiCr180 | Romania | STAS 3583 |
| 2333 | Sweden | MNC 900 E |
| F.3504 | Spain | UNE 36-016 |
| X 5 CrNi 18 10 | Spain | UNE 36-016 |
| KO 33 | Hungary | MSZ 4360 |
| S30400 | USA | UNS |
| S30400 | USA | AMS 5501 |
| S30400 | USA | AMS 5513 |
| S30400 | USA | AMS 5560 |
| S30400 | USA | AMS 5563 |
| S30400 | USA | AMS 5565 |
| S30400 | USA | AMS 5566 |
| S30400 | USA | AMS 5567 |
| S30400 | USA | AMS 5639 |
| S30400 | USA | AMS 5697 |
| S30400 | USA | AMS 5857 |
| S30400 | USA | AMS 5868 |
| S30400 | USA | AMS 5910 |
| S30400 | USA | AMS 5911 |
| S30400 | USA | AMS 5912 |
| S30400 | USA | AMS 5913 |
| 304 | USA | AMS AMS-QQ-S-763 |
| 304 | USA | AMS AMS-T-6845 |
| 304 | USA | AMS AMS-T-8506 |
| S30400 | USA | AMS AS7245 |
| S30400 | USA | AMS5564 |
| 304 | USA | ASME SA-182 |
| 8 | USA | ASME SA-194 |
| 304 | USA | ASME SA-213 |
| 304 | USA | ASME SA-240 |
| 304 | USA | ASME SA-249 |
| 304 | USA | ASME SA-312 |
| B8 | USA | ASME SA-320 |
| 304 | USA | ASME SA-358 |
| 304 | USA | ASME SA-376 |
| 304 | USA | ASME SA-403 |
| 304 | USA | ASME SA-409 |
| 304 | USA | ASME SA-479 |
| 304 | USA | ASME SA-688 |
| 304 | USA | ASTM A 1022 |
| 304 | USA | ASTM A 182 |
| 304 | USA | ASTM A 193 |
| B8 | USA | ASTM A 193 |
| B8A | USA | ASTM A 193 |
| 304 | USA | ASTM A 194 |
| 8 | USA | ASTM A 194 |
| 8A | USA | ASTM A 194 |
| TP304 | USA | ASTM A 213 |
| 304 | USA | ASTM A 240 |
| 304 | USA | ASTM A 249 |
| TP304 | USA | ASTM A 269 |
| 304 | USA | ASTM A 276 |
| 304 | USA | ASTM A 312 |
| 304 | USA | ASTM A 313 |
| 304 | USA | ASTM A 314 |
| 304 | USA | ASTM A 320 |
| B8 | USA | ASTM A 320 |
| B8A | USA | ASTM A 320 |
| F304 | USA | ASTM A 336 |
| 304 | USA | ASTM A 358 |
| 304 | USA | ASTM A 368 |
| 304 | USA | ASTM A 376 |
| TP304 | USA | ASTM A 376 |
| WP403 | USA | ASTM A 403 |
| 304 | USA | ASTM A 409 |
| 304 | USA | ASTM A 473 |
| 304 | USA | ASTM A 478 |
| 304 | USA | ASTM A 479 |
| 304 | USA | ASTM A 492 |
| 304 | USA | ASTM A 493 |
| MT304 | USA | ASTM A 511 |
| MT304 | USA | ASTM A 554 |
| 304 | USA | ASTM A 580 |
| TP304 | USA | ASTM A 632 |
| 304 | USA | ASTM A 666 |
| TP304 | USA | ASTM A 688 |
| 304 | USA | ASTM A 774 |
| TP304 | USA | ASTM A 774 |
| 304 | USA | ASTM A 793 |
| TP304 | USA | ASTM A 813 |
| TP304 | USA | ASTM A 814 |
| TP304 | USA | ASTM A 851 |
| 304 | USA | ASTM A 908 |
| TP304 | USA | ASTM A 943 |
| F304 | USA | ASTM A 965 |
| S30400 | USA | ASTM A 988 |
| 304 | USA | ASTM F 1667 |
| S30400 | USA | ASTM F 2215 |
| 304 | USA | ASTM F 2281 |
| 304 | USA | ASTM F 593 |
| 304 | USA | ASTM F 594 |
| 304 | USA | ASTM F 738 |
| 304 | USA | ASTM F 836 |
| 304 | USA | ASTM F 837 |
| 304 | USA | ASTM F 879 |
| 304 | USA | ASTM F 880 |
| 304 | USA | ASTM F 899 |
| 304 | USA | ASTM G 108 |
| 304 | USA | ASTM G 123 |
| S30400 | USA | MIL MIL-S-24249/6 |
| S30400 | USA | MIL MIL-T-5695 |
| 304 | USA | MIL MIL-T-8504 |
| 304 | USA | SAE J 2515 |
| 304 | USA | SAE J 405 |
| 304 | USA | SAE J 412 |
| 30304 | USA | SAE J 467 |
| 60304 | USA | SAE J 467 |
| X 5 CrNi 18 10 | Germany | DIN 17440 |
Producer/Supplier/Trade names
| Tradename | Supplier |
|---|---|
| UGINE 4301-1 | Ugitech SA, Ugine |
| UGINE F4301-1 | Ugitech SA, Ugine |
| 1.4301 | Saarstahl AG, Völklingen |
| 1.4301 | Walzwerke Einsal GmbH, Nachrodt |
| 1.4301 | Chr. Höver & Sohn GmbH & Co KG, Lindlar |
| 1.4301 | ZAPP AG, Ratingen |
| 1.4301 | Schoellerwerk GmbH & Co. KG, Hellenthal/Eifel |
| 1.4301 | Rolf Kind GmbH, Gummersbach |
| 1.4301 | BESSEY Tool GmbH & Co. KG, Bietigheim-Bissingen |
| 1.4301 | WDI - Westfälische Drahtindustrie GmbH, Hamm |
| 1.4301 | Sprint Metal Edelstahlziehereien GmbH, Hemer |
| 1.4301 | NIRONIT Edelstahlhandel GmbH, Rosengarten |
| 1.4301 | H. Kleineberg GmbH, Stelle |
| 1.4301 | ROPA STAHLVERTRIEB GMBH, Bad Bergzabern |
| 1.4301 | INOX SERVICE CENTER GmbH, Krefeld |
| 1.4301 | STAPPERT Deutschland GmbH, Düsseldorf |
| 1.4301 | INTERSTAHL Service GmbH, Wetter |
| 1.4301 | Rosswag GmbH, Pfinztal-Kleinsteinbach |
| 1.4301 | Imet Industriemetall Handelsgesellschaft mbH, Hamburg |
| 1.4301 | Eisen-Heinzl GmbH, Selb-Erkersreuth |
| 1.4301 | SIJ MWT GmbH, Landsberg am Lech |
| 1.4301 | Quick Metall GmbH, Forst |
| 304 | ThyssenKrupp Stainless International GmbH, Krefeld |
| 4301 | Swiss Steel International GmbH, Düsseldorf |
| 4301 | Edelstahlservice GmbH, Frankfurt/M. |
| 4301 | K. D. Feddersen & Co. Ueberseegesellschaft mbH, Hamburg |
| A500 | Schoeller-Bleckmann Edelstahlrohr GmbH, Ternitz |
| AISI 304-IMA | F.W. Hempel & Co. Gesellschaft für Spezial-Rostfrei-Metalle mbH, Oberhausen |
| AL 304 | ATI Flat Rolled Products GmbH, Remscheid |
| ALZ 304 | Aperam Stainless Europe, Paris |
| ARGESTE 1.4301 | Zapp Precision Metals GmbH, Schwerte |
| AVESTA-Polarit 4301 | Outokumpu GmbH, Willich |
| BEKINOX 304 | Bekaert GmbH, Friedrichsdorf |
| BGH 4301 | BGH Edelstahl Siegen GmbH |
| BÖHLER A 500 | voestalpine High Perfomance Metals Deutschland GmbH, Düsseldorf |
| BÖHLER A500 | voestalpine BÖHLER Edelstahl GmbH & Co.KG, Kapfenberg |
| CHRONIMO 1.4301 | Chronimo Edelstahl GmbH, Barsbüttel |
| CLI 18-9 | Industeel Deutschland GmbH, Grevenbroich |
| Cogne 304/4 | COGNE Edelstahl GmbH, Neuss |
| Cogne 304/6 | COGNE Edelstahl GmbH, Neuss |
| Cogne F 304 | COGNE Edelstahl GmbH, Neuss |
| Coracid 4301 | Chr. Höver & Sohn GmbH & Co. KG, Lindlar |
| Corronon 188 S | Aubert&Duval Special Steel GmbH, Mönchengladbach |
| Cronifer 1809 | VDM Metals GmbH, Werdohl |
| DIRO-X5CrNi18-10 | DIROSTAHL, Remscheid |
| DMV 304 | Salzgitter Mannesmann Stainless Tubes GmbH, Mülheim an der Ruhr |
| DOMINIAL RAN 304 | Kind & Co., Edelstahlwerk, Wiehl |
| Edel 1.4301 | ET Edelstahl-Trading GmbH, Willich |
| ERO 4301 A | Hartmann Edelstahlrohre GmbH, Wilnsdorf |
| Eschmann 4301 | EschmannStahl GmbH, Reichshof-Wehnrath |
| Hacodur RS 301 | Hagenkötter GmbH & Co., Solingen |
| HAFESTA B 2 W | Hagener Feinstahl GmbH, Hagen |
| Inox 1.4301 | INOX-Stahlgesellschaft mbH, Nürtingen |
| INOX 4301-304 | TPS-Technitube Röhrenwerke GmbH, Daun |
| KF 300 S | Willy Haecker GmbH, Hückeswagen |
| Klöckner 1.4301 | Klöckner & Co SE, Duisburg |
| Koro 4301 | Koring + Rottsieper Edelstahl GmbH + Co.KG, Remscheid |
| Märker Irrubigo 4301 | Schmidt + Clemens GmbH + Co. KG, Edelstahlwerk Kaiserau, Lindlar |
| NIROSTA 4301 | VDM Metals GmbH, Werdohl |
| NIROSTA 4301 | Deutsche Edelstahlwerke Specialty Steel GmbH & Co. KG, Witten |
| NIROSTA 4301 | Outokumpu Nirosta GmbH, Krefeld |
| PA 188 W | Platestahl Umformtechnik GmbH, Lüdenscheid |
| Puro 1.4301 | Remystahl GmbH & Co. KG, Hagen |
| REMANIT 4301 | Deutsche Edelstahlwerke Specialty Steel GmbH & Co. KG, Witten |
| ROMAX 301 | W.S.M. Werkzeugstahl Handelsgesellschaft mbH & Co. KG, Meinerzhagen |
| RP 2 S | Gustav Grimm Edelstahlwerk GmbH & Co. KG, Remscheid |
| SANDVIK 4LR11 | SANDVIK Materials TEchnology Deutschland GmbH, Düsseldorf |
| SANDVIK 5LR11 | SANDVIK Materials TEchnology Deutschland GmbH, Düsseldorf |
| SANDVIK 5R10 | SANDVIK Materials TEchnology Deutschland GmbH, Düsseldorf |
| SANDVIK 6LR11 | SANDVIK Materials TEchnology Deutschland GmbH, Düsseldorf |
| SANDVIK SANMAC 304 | SANDVIK Materials TEchnology Deutschland GmbH, Düsseldorf |
| SANDVIK SANMAC 304L | SANDVIK Materials TEchnology Deutschland GmbH, Düsseldorf |
| SAW | Dörrenberg Edelstahl GmbH, Engelskirchen |
| SB 2 | Edelstahlwerk W. Ossenberg & Cie. GmbH, Altena |
| THENOX 4301.1THENOX 4301.2 | C.D. Wälzholz GmbH & Co. KG, Hagen |
| TS 4301 | ThyssenKrupp Schulte GmbH, Essen |
| UGIMA 4301 | Ugitech SA, Ugine |
| UGIMA 4301-1 | Ugitech SA, Ugine |
| UGIMA 4301-2 | Ugitech SA, Ugine |
| UGIMA 4301FG | Ugitech SA, Ugine |
| UGINE 4301-2 | Ugitech SA, Ugine |
| UGINE 4301FG | Ugitech SA, Ugine |
| UGINE 4301P | Ugitech SA, Ugine |
| UGINE F4301-2 | Ugitech SA, Ugine |
| UGINE F4301-3 | Ugitech SA, Ugine |
| UGINE HQ4301-1 | Ugitech SA, Ugine |
| UGINE HQ4301-2 | Ugitech SA, Ugine |
| UGINE HQ4301-3 | Ugitech SA, Ugine |
| UGINE HQ4301-4 | Ugitech SA, Ugine |
| UGINE R4301 | Ugitech SA, Ugine |
| UGINE S4301 | Ugitech SA, Ugine |
| UGINOX 18-9 D | Aperam Stainless Europe, Paris |
| UGINOX 18-9 E | Aperam Stainless Europe, Paris |
| UGINOX 19-9 DDQ | Aperam Stainless Europe, Paris |
| VALIMA 304 | Salzgitter Mannesmann Stainless Tubes GmbH, Mülheim an der Ruhr |
| X 18 J | AUBERT & DUVAL Deutschland GmbH, München |
| X5CrNi18-10 | Hoesch Hohenlimburg GmbH, Hagen |
| X5CrNi18-10 | Salzgitter Flachstahl GmbH, Salzgitter |
| X5CrNi18-10 | voestalpine AG, Linz |
| X5CrNi18-10 | Haage Anagramm Technologien GmbH, Mülheim a. d. Ruhr |
| X5CrNi18-10 | Böllinghaus Steel GmbH, Hilden |
| X5CrNi18-10 | F.W. Hempel & Co. Gesellschaft für Spezial-Rostfrei-Metalle mbH, Oberhausen |
| X5CrNi18-10 | Schmiedewerke Gröditz GmbH, Gröditz |
| X5CrNi18-10 | HEINE + BEISSWENGER Stiftung + Co.KG, Fellbach |
| X5CrNi18-10 | Tata Steel, IJmuiden |
| X5CrNi18-10 | EZM Edelstahlzieherei Mark GmbH, Wetter |
| X5CrNi18-10 | Günther + Schramm GmbH, Oberkochen |
| X5CrNi18-10 | STM Stahl Vertriebs GmbH, Gräfelfing |
| X5CrNi18-10 | GeisslerWista GmbH, Witten |
| X5CrNi18-10 | Wilhelm Jungermann GmbH, Remscheid |
| X5CrNi18-10 | Wilhelm Oberste-Beulmann GmbH & Co. KG, Remscheid |
| X5CrNi18-10 | pauly STAHLHANDEL, Essen |
Material Compliance
| REACh | RoHS |
|---|---|
| blur | blur |
Strain life
| Temperature [°C] | Static hardening coefficient [MPa] | Static hardening exponent | Cyclic fatigue strength coefficient [MPa] | Cyclic fatigue strength exponent | Ductility coefficient [Pa] | Ductility exponent | Cyclic strength coefficient [MPa] | Cyclic strain hardening exponent | Young's modulus [GPa] |
|---|---|---|---|---|---|---|---|---|---|
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur |
Linear-elastic
| Temperature [°C] | Young's modulus [GPa] | Bulk modulus [GPa] | Shear modulus [GPa] | Poisson's ratio |
|---|---|---|---|---|
| blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur |
Alternating stress
| Temperature [°C] | Stress ratio | Mean stress [MPa] | Alternating stress [MPa] | Cycles |
|---|---|---|---|---|
| blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur |
Yield strength
| Temperature [°C] | 0.1% Proof strength [MPa] | 0.2% Proof strength [MPa] | Yield strength [MPa] |
|---|---|---|---|
| blur | blur | blur | blur |
| blur | blur | blur | blur |
| blur | blur | blur | blur |
| blur | blur | blur | blur |
| blur | blur | blur | blur |
| blur | blur | blur | blur |
| blur | blur | blur | blur |
| blur | blur | blur | blur |
| blur | blur | blur | blur |
| blur | blur | blur | blur |
| blur | blur | blur | blur |
Electrical resistivity
| Temperature [°C] | Specific electrical resistance [µΩm] |
|---|---|
| blur | blur |
Coefficient thermal expansion
| Related Temperature [°C] | Temperature [°C] | Coefficient thermal expansion [10^-6*K^-1] |
|---|---|---|
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
Specific heat
| Temperature [°C] | Specific heat [kJ/(kg*K)] |
|---|---|
| blur | blur |
Density
| Temperature [°C] | Density [g/cm³] |
|---|---|
| blur | blur |
Tensile strength
| Temperature [°C] | Tensile strength [MPa] |
|---|---|
| blur | blur |
Thermal conductivity
| Temperature [°C] | Thermal conductivity [W/(m*K)] |
|---|---|
| blur | blur |
Classification
| WIAM Material | Treatment | Semi-finished product | Dimension [mm] | Load type | Failure criteria | Rolling direction | Maximum stress [MPa] | Strain at maximum stress [%] | Source description |
|---|---|---|---|---|---|---|---|---|---|
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur |
Designation
| Designation | Material number | Source |
|---|---|---|
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
Yield strength
| Temperature [°C] | 0.1% Proof strength [MPa] | 0.2% Proof strength [MPa] | Yield strength [MPa] |
|---|---|---|---|
| blur | blur | blur | blur |
Tensile strength
| Temperature [°C] | Tensile strength [MPa] |
|---|---|
| blur | blur |
Classification
| WIAM Material | Treatment | Semi-finished product | Dimension [mm] | Load type | Failure criteria | Rolling direction | Maximum stress [MPa] | Strain at maximum stress [%] | Source description |
|---|---|---|---|---|---|---|---|---|---|
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur |
Tensile strength
| Temperature [°C] | Tensile strength [MPa] |
|---|---|
| blur | blur |
Classification
| WIAM Material | Treatment | Semi-finished product | Dimension [mm] | Load type | Failure criteria | Rolling direction | Maximum stress [MPa] | Strain at maximum stress [%] | Source description |
|---|---|---|---|---|---|---|---|---|---|
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur |
Strain life
| Temperature [°C] | Static hardening coefficient [MPa] | Static hardening exponent | Cyclic fatigue strength coefficient [MPa] | Cyclic fatigue strength exponent | Ductility coefficient [Pa] | Ductility exponent | Cyclic strength coefficient [MPa] | Cyclic strain hardening exponent | Young's modulus [GPa] |
|---|---|---|---|---|---|---|---|---|---|
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur |
Classification
| WIAM Material | Treatment | Semi-finished product | Dimension [mm] | Load type | Failure criteria | Rolling direction | Maximum stress [MPa] | Strain at maximum stress [%] | Source description |
|---|---|---|---|---|---|---|---|---|---|
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur |
Strain life
| Temperature [°C] | Static hardening coefficient [MPa] | Static hardening exponent | Cyclic fatigue strength coefficient [MPa] | Cyclic fatigue strength exponent | Ductility coefficient [Pa] | Ductility exponent | Cyclic strength coefficient [MPa] | Cyclic strain hardening exponent | Young's modulus [GPa] |
|---|---|---|---|---|---|---|---|---|---|
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur |
Classification
| WIAM Material | Treatment | Semi-finished product | Dimension [mm] | Load type | Failure criteria | Rolling direction | Maximum stress [MPa] | Strain at maximum stress [%] | Source description |
|---|---|---|---|---|---|---|---|---|---|
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur |
Strain life
| Temperature [°C] | Static hardening coefficient [MPa] | Static hardening exponent | Cyclic fatigue strength coefficient [MPa] | Cyclic fatigue strength exponent | Ductility coefficient [Pa] | Ductility exponent | Cyclic strength coefficient [MPa] | Cyclic strain hardening exponent | Young's modulus [GPa] |
|---|---|---|---|---|---|---|---|---|---|
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur |
Classification
| WIAM Material | Treatment | Semi-finished product | Dimension [mm] | Load type | Failure criteria | Rolling direction | Maximum stress [MPa] | Strain at maximum stress [%] | Source description |
|---|---|---|---|---|---|---|---|---|---|
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur |
Strain life
| Temperature [°C] | Static hardening coefficient [MPa] | Static hardening exponent | Cyclic fatigue strength coefficient [MPa] | Cyclic fatigue strength exponent | Ductility coefficient [Pa] | Ductility exponent | Cyclic strength coefficient [MPa] | Cyclic strain hardening exponent | Young's modulus [GPa] |
|---|---|---|---|---|---|---|---|---|---|
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur |
Classification
| WIAM Material | Treatment | Semi-finished product | Dimension [mm] | Load type | Failure criteria | Rolling direction | Maximum stress [MPa] | Strain at maximum stress [%] | Source description |
|---|---|---|---|---|---|---|---|---|---|
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur |
Yield strength
| Temperature [°C] | 0.1% Proof strength [MPa] | 0.2% Proof strength [MPa] | Yield strength [MPa] |
|---|---|---|---|
| blur | blur | blur | blur |
| blur | blur | blur | blur |
| blur | blur | blur | blur |
| blur | blur | blur | blur |
| blur | blur | blur | blur |
| blur | blur | blur | blur |
| blur | blur | blur | blur |
| blur | blur | blur | blur |
| blur | blur | blur | blur |
| blur | blur | blur | blur |
Classification
| WIAM Material | Treatment | Semi-finished product | Dimension [mm] | Load type | Failure criteria | Rolling direction | Maximum stress [MPa] | Strain at maximum stress [%] | Source description |
|---|---|---|---|---|---|---|---|---|---|
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur |
Yield strength
| Temperature [°C] | 0.1% Proof strength [MPa] | 0.2% Proof strength [MPa] | Yield strength [MPa] |
|---|---|---|---|
| blur | blur | blur | blur |
Tensile strength
| Temperature [°C] | Tensile strength [MPa] |
|---|---|
| blur | blur |
Classification
| WIAM Material | Treatment | Semi-finished product | Dimension [mm] | Load type | Failure criteria | Rolling direction | Maximum stress [MPa] | Strain at maximum stress [%] | Source description |
|---|---|---|---|---|---|---|---|---|---|
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur |
Yield strength
| Temperature [°C] | 0.1% Proof strength [MPa] | 0.2% Proof strength [MPa] | Yield strength [MPa] |
|---|---|---|---|
| blur | blur | blur | blur |
Tensile strength
| Temperature [°C] | Tensile strength [MPa] |
|---|---|
| blur | blur |
Classification
| WIAM Material | Treatment | Semi-finished product | Dimension [mm] | Load type | Failure criteria | Rolling direction | Maximum stress [MPa] | Strain at maximum stress [%] | Source description |
|---|---|---|---|---|---|---|---|---|---|
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur |
Yield strength
| Temperature [°C] | 0.1% Proof strength [MPa] | 0.2% Proof strength [MPa] | Yield strength [MPa] |
|---|---|---|---|
| blur | blur | blur | blur |
| blur | blur | blur | blur |
| blur | blur | blur | blur |
| blur | blur | blur | blur |
| blur | blur | blur | blur |
| blur | blur | blur | blur |
| blur | blur | blur | blur |
| blur | blur | blur | blur |
| blur | blur | blur | blur |
| blur | blur | blur | blur |
Classification
| WIAM Material | Treatment | Semi-finished product | Dimension [mm] | Load type | Failure criteria | Rolling direction | Maximum stress [MPa] | Strain at maximum stress [%] | Source description |
|---|---|---|---|---|---|---|---|---|---|
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur |
Yield strength
| Temperature [°C] | 0.1% Proof strength [MPa] | 0.2% Proof strength [MPa] | Yield strength [MPa] |
|---|---|---|---|
| blur | blur | blur | blur |
| blur | blur | blur | blur |
| blur | blur | blur | blur |
| blur | blur | blur | blur |
| blur | blur | blur | blur |
| blur | blur | blur | blur |
| blur | blur | blur | blur |
| blur | blur | blur | blur |
| blur | blur | blur | blur |
| blur | blur | blur | blur |
| blur | blur | blur | blur |
Tensile strength
| Temperature [°C] | Tensile strength [MPa] |
|---|---|
| blur | blur |
Classification
| WIAM Material | Treatment | Semi-finished product | Dimension [mm] | Load type | Failure criteria | Rolling direction | Maximum stress [MPa] | Strain at maximum stress [%] | Source description |
|---|---|---|---|---|---|---|---|---|---|
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur |
Yield strength
| Temperature [°C] | 0.1% Proof strength [MPa] | 0.2% Proof strength [MPa] | Yield strength [MPa] |
|---|---|---|---|
| blur | blur | blur | blur |
| blur | blur | blur | blur |
| blur | blur | blur | blur |
| blur | blur | blur | blur |
| blur | blur | blur | blur |
| blur | blur | blur | blur |
| blur | blur | blur | blur |
| blur | blur | blur | blur |
| blur | blur | blur | blur |
| blur | blur | blur | blur |
| blur | blur | blur | blur |
Tensile strength
| Temperature [°C] | Tensile strength [MPa] |
|---|---|
| blur | blur |
Classification
| WIAM Material | Treatment | Semi-finished product | Dimension [mm] | Load type | Failure criteria | Rolling direction | Maximum stress [MPa] | Strain at maximum stress [%] | Source description |
|---|---|---|---|---|---|---|---|---|---|
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur |
Yield strength
| Temperature [°C] | 0.1% Proof strength [MPa] | 0.2% Proof strength [MPa] | Yield strength [MPa] |
|---|---|---|---|
| blur | blur | blur | blur |
| blur | blur | blur | blur |
| blur | blur | blur | blur |
| blur | blur | blur | blur |
| blur | blur | blur | blur |
| blur | blur | blur | blur |
| blur | blur | blur | blur |
| blur | blur | blur | blur |
| blur | blur | blur | blur |
| blur | blur | blur | blur |
| blur | blur | blur | blur |
Tensile strength
| Temperature [°C] | Tensile strength [MPa] |
|---|---|
| blur | blur |
Classification
| WIAM Material | Treatment | Semi-finished product | Dimension [mm] | Load type | Failure criteria | Rolling direction | Maximum stress [MPa] | Strain at maximum stress [%] | Source description |
|---|---|---|---|---|---|---|---|---|---|
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur |
Yield strength
| Temperature [°C] | 0.1% Proof strength [MPa] | 0.2% Proof strength [MPa] | Yield strength [MPa] |
|---|---|---|---|
| blur | blur | blur | blur |
Tensile strength
| Temperature [°C] | Tensile strength [MPa] |
|---|---|
| blur | blur |
Classification
| WIAM Material | Treatment | Semi-finished product | Dimension [mm] | Load type | Failure criteria | Rolling direction | Maximum stress [MPa] | Strain at maximum stress [%] | Source description |
|---|---|---|---|---|---|---|---|---|---|
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur |
Yield strength
| Temperature [°C] | 0.1% Proof strength [MPa] | 0.2% Proof strength [MPa] | Yield strength [MPa] |
|---|---|---|---|
| blur | blur | blur | blur |
Tensile strength
| Temperature [°C] | Tensile strength [MPa] |
|---|---|
| blur | blur |
Classification
| WIAM Material | Treatment | Semi-finished product | Dimension [mm] | Load type | Failure criteria | Rolling direction | Maximum stress [MPa] | Strain at maximum stress [%] | Source description |
|---|---|---|---|---|---|---|---|---|---|
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur |